• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.416-421
• /
• 2008

Recent high-speed trains around the world have achieved remarkable improvement in speed. In Korea, the new high-speed train with maximum speed of 400km/h has been developing through the 'Future High-Speed Rail System Project'. The improvement in train speed brings numerous aerodynamic problems such as strong aerodynamic resistance, noise, drastic pressure variation due to the crosswind or passing by, micro-pressure wave at tunnel exit, and so on. Especially, the nose shape of high-speed train is closely related to the most of the aerodynamic problems. Also the pantograph has to be considered for noise prevention and detachment problems. In this paper, the project, 'Research on the Aerodynamic Technology Advancement of the High-Speed EMU' is introduced briefly, which is one of the efforts for the speed improvement of the 'HEMU400x'. Finally, two main results of train nose and pantograph will be shown. First, the optimization of the cross-sectional area distribution of the high-speed train nose to reduce tunnel micro-pressure wave, and second, robust design optimization of the panhead shape of a pantograph.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.2_2
• /
• pp.341-347
• /
• 2023

The subway is one of the most common and important means of transportation in modern society. In order to use the subway safely, tracks are necessary, but trains are prone to derailment and collisions. In order for the train to run safely on the track, the fishplate that connects the line connection is used. The damaged railway was a fishplate for connecting subway lines used for 11 years, and damage analysis and countermeasures were presented. Beach marks were observed on both fracture surfaces, and striations appeared at the range of crack propagation. The damaged part is Cr carbide, which has a higher hardness than the base metal, and is judged to be embrittled and destroyed by fatigue. The SM50C fishplate was subjected to a cyclic stress of about 59% of the upper limit of tensile-compression fatigue limit, but inclusions were the cause of failure. In order to prevent fatigue failure of the SM50C steel fishplate, the occurrence of inclusions should be minimized and processed to have a homogeneous structure when manufacturing the fishplate. In addition, compressive residual stress is given through surface modification such as peening to control crack generation. It is necessary to minimize the change in shape that can become a stress concentration part along with accurate fastening of the bolt, and to design the stress distribution to be as uniform as possible.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.3
• /
• pp.147-153
• /
• 2013

There exist various types of the WEC (Wave Energy Converter), and among them, the point absorber is the most popularly investigated type. However, it is difficult to find examples of systematically measured data analysis for the design of the point absorber type of power buoy in the world. The study investigates the wave load acting on the point absorber type resonance power buoy wave energy extraction system proposed by Kweon et al. (2010). This study analyzes the time series spectra with respect to the three-year wave data (2002.05.01~2005.03.29) measured using the pressure type wave gage at the seaside of north breakwater of Hupo harbor located in the east coast of the Korean peninsula. From the analysis results, it could be deduced that monthly wave period and wave height variations were apparent and that monthly wave powers were unevenly distributed annually. The average wave steepness of the usual wave was 0.01, lower than that of the wind wave range of 0.02-0.04. The mode of the average wave period has the value of 5.31 sec, while mode of the wave height of the applicable period has the value of 0.29 m. The occurrence probability of the peak period is a bi-modal type, with a mode value between 4.47 sec and 6.78 sec. The design wave period can be selected from the above four values of 0.01, 5.31, 4.47, 6.78. About 95% of measured wave heights are below 1 m. Through this study, it was found that a resonance power buoy system is necessary in coastal areas with low wave energy and that the optimal design for overcoming the uneven monthly distribution of wave power is a major task in the development of a WEF (Wave Energy Farm). Finding it impossible to express the average spectrum of the usual wave in terms of the standard spectrum equation, this study proposes a new spectrum equation with three parameters, with which basic data for the prediction of the power production using wave power buoy and the fatigue analysis of the system can be given.

• Journal of the Korean Geographical Society
• /
• v.31 no.3
• /
• pp.593-612
• /
• 1996

This study concern with the changes of street from the Choseon Dynasty to present days around Old-Boundary in Taegu, analyzing the backgrounds of change factors and development trends of the Taegu City. The basis element of a city structure is the street. Therefore, in this study, a chage of street space of a city was investigted. Historically, Taegu was a walled city and had a Mono-nucleus which was restricted by the castle, and served as a starting point of formation of spatial structuure. The form of the artery street took a "T" pattern, othe streets were formed in irregular shapes. As the city grew gradually, the castle was removed on account of diversification in traffic network, change of socio-economic organization in traffic network, change of socio-economic organization, formation of industrial bases and functional distribution. CBD of this city has been located within the area surrounded by these streets. This is a kind of general pattern of traditional walled cities through the world in both Western and Oriental societies. A s the begining of this centry, a 'Dark Ages' descended upon Korea because the country was under the Japanese-Korean Annexation, and, throughout this period, the urban planning was planned exclusively for Japanese. The street pattern within residential areas of Korea took the maze type, in contrast with Japanese residential areas which showed grid pattern of streets. This is another general pattern of almost of all colonial cities especially in Asia. High class residential areas were planned and built by Japanese, and they were located within 5-10 minutes' on-foot distance from the CBD hard core. This high prestige has continued until the 1980s when it occurred land use succession which commerical functions invaded into residential areas. Back in the colonial period, there was a between two hetrogeneous groups due to the fact that the Japanese lived mainly oriented the new railway system but that Koreans still lived along the old highway system which ran through the Korea Peninsula. Street netwook formed in the above process has maintained its shape without great changes after the liberation form the Japanese Colony. Taegu has, accordingly, developed ring-radial network system which has been a combination of radial and ring facilities. The present conditions of street patterns in Taegy mainly depend on 4 rings and 8 radius, with grid pattern street able to be found in Old Boundary.