• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.211-219
• /
• 2005

The railway industry of each country has variant technical standards and regulations unlike other industries. For this reason, it is necessary to investigate the domestic technical standards and regulations and to prepare the countermeasure of the variance for advancing the korean high-speed railroad system into foreign market. This study was designed to investigate the railway design/manufacturing, examination/inspection and safety of domestic and foreign countries subject to a world market for advancing the korean high-speed railroad system into a foreign market. Because the reliance of a railroad system is a prerequisite for the safety of railroads, it is very important to obtain the reliance data, which is based on the RMS analysis of foreign countries subject to a world market.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.213-214
• /
• 2008

Since standardization project is composed of complicate system, such as vehicle, signal, electric power and railway, how to build management system of the project has influence on the success of the project for the first stage of the project. The computer system design tool supports to carry out requirement analysis, DB construction, and history and follow-up management efficiently. Therefore, the aim of this study is to investigate the method to optimize schema using computer system design tool.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.461-470
• /
• 2009

A railroad has a benefit of the mass transportation of a passenger and cargo, but just a time of accident could cause a huge loss of a human life and property. Especially, a typhoon and a localized torrential downpour usually happened in summer season have caused average 38.29 times of the missing roadbed which support the railroad in recent 7 years. If a train would pass on this railroad which the roadbed was missed, there could be a huge accident and many people will die. But, the security issue is not satisfied because the method of sensing the missing roadbed is depending solely on the naked eye inspection by a person in charge. So, in this study, I would like to suggest the missing roadbed real-time sensing and train operation system to reduce the possibility of the railroad accident by controlling the operation of train when the missing roadbed condition would be sensed in the real-time system.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.358-360
• /
• 1997

The train control and monitoring system(TCMS) is an on board computer system in railway vehicles performing the control, supervisory and diagnostic functions of the complete train. This system replaces a lot of hardwired relays and minimizes the necessaries vehicle wiring thus increasing the reliability of the train. In this paper, we proposed a software design technique of TCMS using CASE tool (SAO+). The TCMS functions are implemented in software easily programmed, using a functional block, graphic programming language. We applied the compressor air module to a case study.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.321-324
• /
• 2001

The accidents in a railway level crossing where passengers or vehicles pass on the track went through by the train with a inherent high rate on incidents lead to a vast economic damage on people and material resources. So, many protection equipments are placed on the railway crossing to prevent those kind of accidents. But there is a limit to control driver's rough activity, passenger's careless or an intentional accident. This study is trying to ensure the safety in railway crossing by providing the information on train's speed and expected passing time on the railroad to a road traffic control system or car driver. Additionally, this system has been studying the railway level crossing system concerning ITS to support harmonious traffic flow.

• Journal of Mechanical Science and Technology
• /
• v.20 no.10
• /
• pp.1548-1556
• /
• 2006

Appropriate contact force is required for the pantograph on the high speed train to collect current from the catenery system without separation. However, at high speed, large aerodynamic lifting force is generated by the contact plate and the body of pantograph, which may cause wear of the contact wire. In this study, to confirm the interface performance of the pantograph on Korea High Speed Train, a method to measure the contact force of the pantograph was proposed and the related measuring system was developed. The forces acting on the pantograph were clarified and a practical procedure to estimate the forces was proposed. A special device was invented and applied to measure the aerodynamic lifting force. Measured contact forces were displayed by the developed system and evaluated based on the criteria.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1370-1372
• /
• 2004

At present. distance relay and ${\Delta}I$ current increment relay are used as primary and secondary protection in the AC feeder system. However. electric railway vehicles according to power electronic's development had developed resistance control, thyristor phase control and PWM control system. and operation of train is increasing in a feeder section. Therefore this paper analyzes the load characteristics and situation of relay's maloperation caused by load current increase, harmonics, regenerative braking current and operation of the different vehicles in same feeder section. Based on this analysis. this paper proposes consideration items for relay correction and advanced adaptive relay that can change operation area according to load current.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.10
• /
• pp.1493-1500
• /
• 2015

For efficient and economical train operation in low-density railway line, on-board oriented train control system, which reduces expensive wayside equipment, is being developed. In this paper, we discuss a tram signal priority strategy which enables efficient and safe train operation when the developing system is applied to train-tram railway environment. Based on the well-known transit signal priority strategies, we develop a tram signal priority algorithm and conduct simulations by using model-based systems engineering (MBSE) tool. Various considerations such as operation procedure, linkage to existing road traffic system, applicability with respect to crossroad types, and so on, are also dealt with.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.531-532
• /
• 2006

This paper presents the implementation of Real-time data acquisition system for dynamic characteristics of overhead contact wire in electric railway. The reconfigurable field-programmable gate array (FPGA) and LabVIEW graphical development tools have been used to Real-time monitoring system. The results from a field test show that the proposed technique and developed system can be practically applied to measure the assessment quantity or quantities on overhead contact lines for the online real-time process monitoring.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1100-1105
• /
• 2022

Denoising, registering, and detecting changes of 3D digital map are generally conducted by skilled technicians, which leads to inefficiency and the intervention of individual judgment. The manual post-processing for analyzing 3D point cloud data of construction sites requires a long time and sufficient resources. This study develops automation technology for analyzing 3D point cloud data for construction sites. Scanned data are automatically denoised, and the denoised data are stored in a specific storage. The stored data set is automatically registrated when the data set to be registrated is prepared. In addition, regions with non-homogeneous densities will be converted into homogeneous data. The change detection function is developed to automatically analyze the degree of terrain change occurred between time series data.