• 한국지반공학회지:지반
• /
• 제8권1호
• /
• pp.67-80
• /
• 1992

본 연구에서는 시간에 따른 공사하중의 크기 변화가 다양할 경우에, smear zone및 well resistance의 영향을 모두 고려하여 설계시에 요구되는 모래기등 영향원의 반지름(즉, 모래기둥의 설치간격)을 결정하기 위한 해석법을 제시하였다. 이를 위해 단순선형점증하중의 경우에 대해 제시된 Olson의 해석법(smear zone 및 well resistance의 영향을 모두 무시한 경우)을 변형하였으며, 아울러 제시된 해석법을 토대로 설계에 관련된 여러가지 변수가 모래기end의 설치간격에 미치는 영향을 조건별로 분석하였다.

• 한국자동차공학회논문집
• /
• 제4권5호
• /
• pp.26-36
• /
• 1996

The fully developed turbulent momentum and heat transfer induced by the square-ribbed roughness elements on both the inner and outer wall surfaces in concentric annuli are studied analytically based on a modified turbulence model. The analytical results of the fuid flow are verified by experiment. The experiment is done with a pitot tube and a X-type hot wire anemometer to measure the time mean velocity profiles, zero shear stress positions, maximum velocity positions and friction factors, and etc. shown in Fig.1. The resulting momentum and heat transfer are discussed in terms of various parameters, such as the radius ratio, the relative roughness, the roughness density, Reynolds number, Nusselt bumber and Prand시 number. The study demonstrates that certain artificial roughness elements may be used to enhance heat transfer rates with advantage from the overall efficiency point of view by investigating turbulent flows and heat transfer in Fig.1.

• 소성∙가공
• /
• 제12권3호
• /
• pp.251-258
• /
• 2003

The paper deals with an analysis of an extrusion process with a divided material flow in a combined radial - backward extrusion. The paper discusses the influences of tool geometry such as punch nose angle, relative gap height, die comer radius on material flow and surface expansion into can and flange region. To analyze the process, numerical simulations by the FEM and experiment, an Al alloy as a model material have been performed. Based on the results, the influence of design parameters on the distribution of divided material flow and surface expansion are obtained.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권1호
• /
• pp.54-61
• /
• 1999

The fully developed turbulent momentum and heat transfer induced by the roughness elements on the outer wall surfaces in concentric annuli are analytically studied on the basis of a modified turbu-lence model. The resulting momentum and heat transfer are discussed in terms of various parame-ters such as the radius ratio the roughness density Reynolds number and Prandtl number accord-ing to the heating condition. The study shows that certain artificial roughness elements may be used to enhance heat transfer rates with advantage from the overall efficiency point of view.

• Structural Engineering and Mechanics
• /
• 제21권3호
• /
• pp.315-332
• /
• 2005

The Element-free Galerkin Method has become a very popular tool for the simulation of mechanical problems with moving boundaries. The internally applied Moving Least Squares interpolation uses in general Gaussian or cubic weighting functions and has compact support. Due to the approximative character of this interpolation the obtained shape functions do not fulfill the interpolation conditions, which causes additional numerical effort for the application of the boundary conditions. In this paper a new weighting function is presented, which was designed for meshless shape functions to fulfill these essential conditions with very high accuracy without any additional effort. Furthermore this interpolation gives much more stable results for varying size of the influence radius and for strongly distorted nodal arrangements than existing weighting function types.

• 한국분무공학회지
• /
• 제22권1호
• /
• pp.36-41
• /
• 2017

The present study investigates the evaporation heat transfer characteristics of nanofluid droplet for different nanoparticle sizes. Also, the heat transfer coefficient was measured at different nanoparticle concentrations during evaporation. From the experimental results, it is found that the evaporation behavior of sessile droplet can be considered as constant radius mode due to pinning effect. The total evaporation time of sessile droplet decreases with nanoparticle size up to 7.9% for 0.10 vol% nanofluid droplet. As nanoparticle concentration increases, the clear difference in heat transfer coefficient is observed, showing that the size effect should be examined. This result would be helpful in designing the correlation between the nanoparticle size and the heat transfer characteristics for various applications.

• 소성∙가공
• /
• 제20권2호
• /
• pp.124-131
• /
• 2011

A flexible stretch forming process is useful for small quantity batch production because various shape changes of the flexible die can be achieved conveniently. In this study, the design variables, namely, the punch size, curvature radius and elastic pad thickness, were quantitatively evaluated to understand their influence on sheet formability using statistical methods such as the correlation and regression analyses. Forming simulations were designed and conducted by a three-way factorial design to obtain numerical values of a shape error. Linear relationships between the design variables and the shape error resulted from the Pearson correlation analysis. Subsequently, a regression analysis was also conducted between the design variables and the shape error. A regression equation was derived and used in the flexible die design stage to estimate the shape error.

• Journal of Astronomy and Space Sciences
• /
• 제12권1호
• /
• pp.14-20
• /
• 1995

Alfven 파에 의한32 Cyg의 항성풍에서 감쇄길이가 미치는 영향을 보기 위해 감쇄길이를 달리 주어 항성풍의 속도분포를 구하였다. 감쇄길이와 초거성 반경의 비가 $\lambda$ = 0.9, 1.0, 5.0을 갖는 모형과 감쇄길이가 거리에 따라 선형적으로 증가하는 모형의 4가지 경우를 비교하였다. 항성풍의 속도에 영향 미치는 것온 주로 Alfven 파에 의한 힘이고 중력과 압력에 의한 효과는 작았으며, 션형함수척인 감쇄길이 모형에셔논 별 가까이에서 감쇄길이가 짧기 때문에 일정한 감쇄길이 모형보다 급속히 속도가 증가함을 보였다.

• 한국컴퓨터정보학회논문지
• /
• 제9권4호
• /
• pp.93-97
• /
• 2004

본 논문에서는 수분센서용으로 적합한 구조의 안테나로 소형 도체면 구조의 개루우프 안테나를 모델로 제시하고, 그 동작특성을 모멘트법을 이용하여 수치해석하였다. 수치해석 결과 동작주파수 $300{\sim}500[MHz]$ 대역에서 안테나의 파라미터 값들의 변화에 따라 입력임피던스는 $50[{\Omega}]$으로 정합시킬 수 있었으며, 또한 개루우프 반경, 높이, 폭은 안테나의 공진주파수를 변화시키는 파라미터로 작용하였으며, 부하로 사용되는 인덕턴스 값은 안테나의 입력임피던스를 조절할 수 있는 파라미터로 작용하고 있음을 알 수 있었다.

• 한국수자원학회논문집
• /
• 제30권1호
• /
• pp.15-22
• /
• 1997

하천형성의 중요한 요인이 되는 사행하천의 흐름은 막곡호안에 많은 영향을 준다. 특정한 하천에 대해 하도개량을 적용시키기 위한 일반적인 기준을 기술하기는 어려우나 토목 설계자에게 어떤 원칙과 지침을 제공하는 것은 대단히 중요하다. 본 고정상 실험연구의 목적은 평균유속과 유로만곡부에서의 곡률변경으로 최대 유속의 크기를 구하여 매번의 수리모형실험을 실시하지 않고도 중소하천의 개수에 이용할 수 있는 자료를 제공함에 있다.