• ETRI Journal
• /
• v.46 no.2
• /
• pp.238-249
• /
• 2024

Equivalent-time sampling can improve measurement or sensing systems because it enables a broader frequency band and higher delay resolution for periodic signals with lower sampling rates than a Nyquist receiver. Meanwhile, a digital down-conversion (DDC) technique can be implemented using a straightforward radio frequency (RF) circuit. It avoids timing skew and in-phase/quadrature gain imbalance instead of requiring a high-speed analog-to-digital converter to sample an intermediate frequency (IF) signal. Therefore, when equivalent-time sampling and DDC techniques are combined, a significant synergy can be achieved. This study provides a parameter design methodology for optimal equivalent-time sampling using DDC.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.305-311
• /
• 2014

Recently, though it was developed several services using the context-awareness technology of IoT, there exist also obstacles for high quality service. Specifically it is short the study for uncertainty of context-awareness. This study focused on understanding the effect of frequency interference among several environmental factors for location determination to increase precision of location determination. It was found that frequency interference between devices using 2.4Ghz frequency effect on the location determination precision. It was resulted that frequency interference increase the error of location determination precision. Then, we confirmed that it was required the suitable compensation method corresponding to frequency interference.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.879-881
• /
• 2010

For the rapid development of society, such as small family, one-people family is following. The traditional family is being changed, so the older stay home alone. That makes it more and more. Staying home alone, the older's health and safety are worth considering by us. With the rapid development of RFIDRadio Frequency Identification) technology, its applications have extended to all areas of our lifes. RFIDRadio Frequency Identification) has became a major topic of concern in multi-industry. With the high-speed economic growth and the development of science, medicine, the old people's life expectancy is increasing slightly. So it is necessary to design a protective system for the older's safety. In this thesis, self-care system is made by using RFID(Radio Frequency Identification) technology to authenticate an user and using TTS(test to speech) to convert character information to voice information and also using infrared radiation technology to protect home effectively, and using e-blood pressure monitors to examination the older's bodies.

• Journal of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.43-48
• /
• 2003

We introduce and describe performance of the 6-meter telescope of Seoul Radio Astronomy Observatory (SRAO). All the softwares and instruments except the antenna structure and its driving system are developed for ourselves. The SIS mixer type receiver resulted in the receiver noise temperature less than 50 K (DSB) over the whole 3-mm radio window. An autocorrelation spectrometer, developed first in Korea, provides maximum 50 MHz band width over 1024 channels. Antenna surface is measured and adjusted using template method and radio holography which resulted in a superb surface accuracy bet-ter than 30${\mu}m$. Accordingly, the aperture and beam efficiences amount to $70\%$ and $75\%$, respectively, largely independent of frequency in the 85 - 115 GHz range. It is also found that telescope pointing errors are less than 10" in both azimuth and elevation and that antenna gain is almost constant against elevation greater than $20^{\circ}$, without adjusting sub-reflector position. The SRAO 6-meter telescope is now fully operational and all these characteristics verify that observations are carried out with high precision and fidelity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.4
• /
• pp.397-405
• /
• 2004

In this paper, performance analysis of mobile phone with internal antenna for PCS band was carried out. The radiation patterns for antenna and mobile phone with internal antenna were simulated by using 3D simulation program, HFSS and SEMCAD. Radiation pattern variation was observed according to installation of LED circuit and ground pattern and by using simulation radiation pattern was improved. And radiation patterns of mobile phones with internal and external antennas were measured by using for field measurement system and chamber. Measured radiation pattern for mobile phone with internal antenna shows good agreement with simulation result. And the radio sensitivities of mobile phones with internal and external antennas were measured by using Agilent E5515C and chamber and compared. The measured radio sensitivity of mobile phone with internal antenna shows proper performances comparable to other model with external antenna. Measured result shows that the difference on averaged co-polar radio sensitivity is 0.12 ㏈.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.1026-1031
• /
• 2022

Cognitive Radio Ad-Hoc Networks (CRAHNs) enable to overcome the shortage of frequency resources due to the increase of radio services. In order to avoid interference with the primary user in CRANH, channel sensing to check the idle channel is required, and when the primary user appears, the time delay due to handover should be minimized through fast idle channel selection. In this paper, throughput was improved by reducing the number of channel sensing and preferentially sensing a channel with a high probability of being idle, using reinforcement learning. In addition, we proposed a multi-channel MAC (Medium Access Control) protocol that can minimize the possibility of collision with the primary user by sensing the channel at the time of data transmission without performing periodic sensing. The performance was compared and analyzed through computer simulation.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.3
• /
• pp.142-145
• /
• 2015

In this work, open stubs were fabricated on a polyether sulfone (PES) substrate, and their basic radio frequency (RF) characteristics were investigated for application to RF matching components of a flexible monolithic microwave integrated circuit (MMIC). According to the results, an open stub employing coplanar waveguide (OSCPW) on PES exhibited much lower loss than that on silicon substrate. The OSCPW with a length of $500{\mu}m$ on PES showed capacitance values of 0.031 ~ 0.044 pF from 0.5 to 50 GHz. For application to a relatively high-value capacitive matching, an open stub employing a fishbone-type transmission line (OSFTTL) was fabricated on PES, and its characteristics were investigated. The OSFTTL showed much higher capacitance values than the OSCPW due to the high effective permittivity value. Specifically, the OSFTTL on PES showed capacitance values of 0.066 ~ 0.24 pF from 0.5 to 50 GHz, which are higher than those for the open stub on silicon substrate. The above results indicate that the OSCPW and OSFTTL on PES can be effectively used for application to low/high-value capacitive matching components on microwave and millimeter wave flexible MMIC. To the best of the authors' knowledge, this work is the first report of the investigation of RF capacitive matching components on PES substrate.

• Journal of Satellite, Information and Communications
• /
• v.6 no.1
• /
• pp.75-79
• /
• 2011

Wireless devices can communicate between each other without existing infrastructure in mobile Ad-hod network. Ad hoc networks can be used under difficult conditions, where it is difficult to construct infrastructures, such as shadowing areas, disaster areas, war area, and so on. In order to support to considerable and various wireless services, more spectrum resources are needed. However, efficient utilization of the frequency resource is difficult because of spectrum scarcity and the conventional frequency regulation. Ad-hoc networks employing cognitive radio (CR) system that guarantee high spectrum utilization provide effective way to increase the network capacity. In this paper, we simulate and compare the performance of conventional single and cooperative spectrum sensing with CR system using ad-hoc networks in additive white Gaussian noise (AWGN) and Rayleigh channel model. And we demonstrate performance improvement by analyzing the system performance.

• Journal of Navigation and Port Research
• /
• v.30 no.1 s.107
• /
• pp.85-90
• /
• 2006

RFID(Radio Frequency IDentification) is appearing by point technology by Ubiquitous environment of new paradigm and Logistics' application But, RFID chip of this is high price and short bandwidth, low power and interference etc. can become technological problem This is getting into obstacle in common use. Reader and tag, Embedded software etc.. that are accomplishing standardization are imported paying most expensive royalty. This paper deals with a RFID cognition system that use PDA under ubiquitous environment to apply to Logistics system A RFID cognition system processes input/output of fundamental information attaching a tag onto products. And a RFID cognition system supports quick, correct and sqfe synthetic Logistics managerial system through construction of database. This can minimize logistics costs and improve the quality of customer service. A RFID cognition system has advantage that can widen range of application to area that cognition system of existent fixing style can not do. Also, it can expect economical effect through inexpensive system construction.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.180-185
• /
• 2011

The TPMS(Tire Pressure Monitoring System) is an electronic system designed to display the air pressure inside the pneumatic tires and report real-time tire-pressure information to the driver of the vehicle, either via a gange, a pictogram display, or a simple low-pressure warning light. Although the data measured by TPMS sensor is transmitted to internal signal processer in a vehicle through wireless communication, the receiver may suffers from various interferences such as amateur radio station, RFID(Radio-Frequency IDentification) for controlling container, RKE(Remote Keyless Entry) signal, and so on. In this paper, we consider beamforming technology to suppress various high-power interference signals for the TPMS wireless communications. Also, we propose the proper data structure and antenna arrangement for the beamformer inside the vehicle. The performance for the interference suppression is illustrated by computer simulation example.