• ETRI Journal
• /
• v.39 no.6
• /
• pp.813-819
• /
• 2017

A slotted rectangular nameplate antenna design with a patch bearing the name of the first author is presented. A $6.8mm{\times}26mm{\times}1.6mm$ substrate of FR-4 epoxy material having a relative permittivity of 4.4 and a dielectric loss tangent of 0.02 is used. Additionally, the feeding technique used is a coaxial mechanism. The standard antenna design parameters, including the reflection coefficient, bandwidth, radiation pattern, gain, directivity, and voltage standing wave radio (VSWR) for the proposed prototype are analyzed using a high-frequency structure simulator (HFSS) v-15, and are compared to the measured results. The designed structure may be considered for different satellite- and radio-determination applications at the respective resonant frequencies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5B
• /
• pp.310-316
• /
• 2005

In this paper, we proposed and evaluated ARAH(Adaptive Random Access algorithm for HIPERLAN/2) to improve system performance. In this paper, HIPERLAN/2 uses OFDM(Orthogonal Frequency Division Multiplexing) modulation scheme to select appropriate PHY mode by Radio Channel Quality, Proposed the ARAH scheme uses these 7 PHY mode when mobile terminal determines the RCH(Random CHannel) number for random access. In this paper, these 7 PHY mode divided into two group, good and bad, and will be given high priority to mobile terminals which are in a good group. In the result of performance evaluation. ARAH algorithm, ARAH has a better performance of throughput and delay than existing algorithm.

• Journal of electromagnetic engineering and science
• /
• v.17 no.4
• /
• pp.169-177
• /
• 2017

The role of electromagnetic (EM) waves in magnetic fusion plasma-ranging from radio frequency (RF) to microwaves-has been extremely important, and understanding of EM wave propagation and related technology in this field has significantly advanced magnetic fusion plasma research. Auxiliary heating and current drive systems, aided by various forms of high-power RF and microwave sources, have contributed to achieving the required steady-state operation of plasmas with high temperatures (i.e., up to approximately 10 keV; 1 eV=10000 K) that are suitable for future fusion reactors. Here, various resonance values and cut-off characteristics of wave propagation in plasmas with a nonuniform magnetic field are used to optimize the efficiency of heating and current drive systems. In diagnostic applications, passive emissions and active sources in this frequency range are used to measure plasma parameters and dynamics; in particular, measurements of electron cyclotron emissions (ECEs) provide profile information regarding electron temperature. Recent developments in state-of-the-art 2D microwave imaging systems that measure fluctuations in electron temperature and density are largely based on ECE. The scattering process, phase delays, reflection/diffraction, and the polarization of actively launched EM waves provide us with the physics of magnetohydrodynamic instabilities and transport physics.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.3-32
• /
• 2016

High power impulse magnetron sputtering (HiPIMS) technique has been developed for more than 15 years. It is characterized by its ultra-high peak current and peak power density to obtain unique thin film properties, such as high hardness, good adhesion and tribological performance. However, its low deposition rate makes it hard to be applied in industries. In this work, the development of HiPIMS system and integration of radio frequency (RF) or mid-frequency (MF) power supplies were introduced. Effects of duty cycle and repetition frequency on the microstructure, mechanical property, optical and electrical properties of some binary, ternary and quarternary nitride coatings and oxide thin films were discussed. It can be observed that the deposition rate was effectively increased by the superimposed HiPIMS with RF or MF power. High hardness, good adhesion and sufficient wear resistance can be obtained through a proper adjustment of processing parameters of HiPIMS power system.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.1
• /
• pp.42-50
• /
• 2006

Co-Fe-Al-O nano-granular thin films with high electrical resistivity, fabricated by radio frequency magnetron sputtering under an $Ar+O_2$ atmosphere, are found to show good soft magnetic properties in the GHz frequency range. The real part value of the relative permeability is 260 at low frequencies and this value is maintained up to the GHz frequency range. A non-integrated type noise filter on a coplanar waveguide transmission line is demonstrated by using the Co-Fe-Al-O nano-granular thin film with the dimensions of $4\;mm(l){\times}4\;mm(w){\times}0.1\;{\mu}m(t)$. The insertion loss is very low being less than 0.3 dB and this low value is maintained up to 2 GHz. At a ferromagnetic resonance frequency of 3.3 GHz, the degree of noise suppression is measured to be 3 dB. This level of noise attenuation is small for real applications, but there is much room for further improvement by increasing the magnetic volume and integrating the magnetic thin film into the CPW transmission line.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.667-670
• /
• 2004

In this paper, we have presented the improved IF transceiver architecture and the implementation and experimental results on re-configurable transceiver based on digital IF for multiple wideband OFDM/TDD base stations for high-speed portable internet-service in which is issued Korea. The implemented IF transceiver has been designed to support multiple frequency allocations and multiple standards by only modifying the programmable software not its hardware like as the software-defined-radio concept. Also, the digital complex quadrature modulation technique has been used for the digital IF transmitter, which is able to combine multiple frequency bands in digital processing block not RF block and to reject the image frequency signals. And the bandpass sampling technique has been used for the digital IF receiver to reduce the sampling rate of ADC. This paper has shown the experiment results on the frequency response and constellation on the base-station implemented using the modified IEEE 802.16a/e physical layer channel structure based on OFDM/TDD.

• Journal of electromagnetic engineering and science
• /
• v.10 no.4
• /
• pp.282-289
• /
• 2010

A simplified, practical vector network analyzer (VNA) that uses mature radio-over-fiber technology has been designed and demonstrated. The measurement concept allows the full S-parameters of a microwave device (or antenna) to be obtained while minimizing the detrimental effects of electrical cables, which are replaced with a photonic link. A variety of high-frequency light modulation schemes with frequency sweeping capabilities are presented to realize a one-path (single, forward), frequency-multiplied optical link for VNA applications. Using the photonic one-path link, full two-port S-parameters have been extracted based on five-term error modeling, which has half the error terms compared with the standard duplex configuration. The S-parameters of a microwave filter and antenna measured using frequency-multiplied optical links are found to be in good agreement with those obtained using a conventional VNA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.156-166
• /
• 2000

In discrete multi-tone (DMT)-based very high bit-rate digital subscriber line (VDSL) systems, the ingressed RFI (Radio Frequency Interference) accompanied by transmitted signal at the receiver is known to cause the spectralleakage by the finite-point FFT, resulting in significant performance degradation.0 this paper, we propose a RFIcancellation technique which can compensate the ingressed RFI efficiently, especially for a high data-rate VDSLsystem. The proposed technique compensates the performance degradation of e VDSL system due to RFI byusing a time-domain RFI canceller whose coefficients are obtained from the estimated center frequency of RFI inthe frequency domain under the assumption that the ingressed RFI is a narrow-band signal compared to VDSLsampling frequency. The proposed technique requires no training symbol and convergence period, and worksproperly even when spectral shape of the ingressed RFI is unknown or arbitrary. Feasibility of the proposedtechnique is demonstrated via a computer simulation by comparing its performance with the performance of theprevious RFI cancellation technique.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.474-479
• /
• 2003

We discussed the usage of a radio resource, the spectrum allocation and the trends of policy about 5㎓ band in other countries, We studied about the technical regulation on high speed wireless access system and the spectrum allocation of ISM bard in 5㎓ bard for other countries. We also analyzed the efficient use of radio resource, the method of frequency sharing and the calculation of spec01m requirement in noel to progress the high speed wireless access system In addition We proposed the schemes of domestic spectrum allocation for high speed wireless access system at 5㎓ band

• Journal of Korea Multimedia Society
• /
• v.25 no.8
• /
• pp.1022-1037
• /
• 2022

It is important to develop a transducer that generates uniform output power through frequency control of the HIFU at 4 MHz frequency for the high intensity focused ultrasound (HIFU) skin diseases treatment. In this paper, a 4 MHz frequency band HIFU system for skin disease treatment was designed, manufactured and developed. In HIFU, even for the ultrasonic vibrator in the 4 MHz frequency band, the characteristics of the output power of the HIFU are different depending on the difference in the thickness of the PZT material. Through the development of a system amplifier, the sound output of the HIFU transducer was improved to more than 48 W and uniform output power control was possible. And, it is possible to control the output power even in a frequency band of 4.0 to 4.7 MHz, which is wider than 4.0 MHz, and shows the resonance frequency of the transducer. The maximum output power for each frequency was 49.969 W and the minimum value was 48.018 W. The maximum output power compared to the minimum output power is 49.969 W, which is uniform within 4.1%. It was confirmed that the output power of the HIFU through the amplifier can be uniformly controlled in the 4 MHz frequency band.