• 한국작물학회지
• /
• 제50권5호
• /
• pp.332-335
• /
• 2005

The three Korean wheat cultivars with different plant types; the erect, the middle and the creeping growth habit, were studied for their utilization to solar radiation, temperature changes on the furrow and to provide optimum planting space for producing the high yield in 2003. The average solar radiation rate was lowest for creeping type ($39.2\%$) and highest for erect type ($75.8\%$) The correlation coefficient between the coverage rate and the solar transmission rate was r = 0.8624 which was significant at $5\%$ level. The relative growth of the plant, tiller rate and leaf size was increased in the erect and the middle type at lower plant density, while no change on plant growth at creeping type regardless of plant density. The increase of leaf size in the lower plant density was due to longer flag and the first leaf than those of other plant types. The temperature on the furrow of growing plants was changed by the canopy. The changes in temperature pattern on the furrow according to plant types during winter season was different compared to the non plant ground. The temperature of the nonplant ground was the lowest due to solar reduction increasing the amount of cool air flowing in the furrow.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3417-3422
• /
• 2023

Recently, as the clinically positive biological effects of ultra-high dose rate (UHDR) radiation beams have been revealed, interest in flash radiation therapy has increased. Generally, FLASH preclinical experiments are performed using UHDR electron beams generated by linear accelerators. Real-time monitoring of UHDR beams is required to deliver the correct dose to a sample. However, it is difficult to use typical transmission-type ionization chambers for primary beam monitoring because there is no suitable electrometer capable of reading high pulsed currents, and collection efficiency is drastically reduced in pulsed radiation beams with ultra-high doses. In this study, a monitoring method using bremsstrahlung photons generated by irradiation devices and a water phantom was proposed. Charges collected in an ionization chamber located at the back of a water phantom were analyzed using the bremsstrahlung tail on electron depth dose curves obtained using radiochromic films. The dose conversion factor for converting a monitored charge into a delivered dose was determined analytically for the Advanced Markus® chamber and compared with experimentally determined values. It is anticipated that the method proposed in this study can be useful for monitoring sample doses in UHDR electron beam irradiation.

• Journal of Photoscience
• /
• 제1권2호
• /
• pp.135-141
• /
• 1994

Elevated near-UV radiation, containing a large amount of UV-B and a small amount of UV-C, inhibited the development of leaves and tillers, the increase in biomass production, the elongation of plant height, the photosynthetic rate and the chlorophyll content in rice plants in a phytotron. Elevated UV-B radiation filtered through cellulose diacetate film or UV-31 cut filter (transmission down to 290 nm) similarly suppressed each growth component above. Near-UV radiation-caused injuries were alleviated either by elevated CO$_2$ atmosphere or by exposure to high irradiance-visible radiation. On the basis of these findings, we examined cultivar differences in the resistance to UV radiation-caused injuries among 198 rice cultivars belonging to 5 Asian rice ecotypes ( aus, aman, boro, bulu and tjeleh) from the Bengal region and Indonesia and to Japanese lowland and upland rice groups. It was shown that .various cultivars having different sensitivities to the effects of near-UV radiation were involved in the same ecotype and the same group, and that the Japanese lowland rice group and the boro ecotype were more resistant. Among Japanese lowland rice cultivars, Sasanishiki (one of the leading varieties in Japan) exhibited more resistance to near-UV radiation, while Norin 1 showed less resistance, although these two cultivars are closely related. It was thus indicated that the resistance to the inhibitory effects of near-UV radiation of rice cultivars is not simply due to the difference in the geographical situation where rice cultivars are cultivated. From the genetic analysis of resistance to the inhibitory effects of UV radiation on growth of rice using F$_2$ plants generated by reciprocally crossing Sasanishiki and Norin 1 and F$_3$ lines generated by self-fertilizing F$_2$ plants, it was evident that the resistance to the inhibitory effects of elevated near-UV radiation in these rice plants was controlled by recessive polygenes.

• 센서학회지
• /
• 제25권2호
• /
• pp.131-137
• /
• 2016

In this study, a multilevel visible light communication (VLC) system based on resistor ladder circuit is designed to transmit medical data. VLC technology is being considered as an alternative wireless communication due to various advantages such as ubiquity, license free operation, low energy consumption, and no radio frequency (RF) radiation characteristics. With VLC even in places where traditional RF communication (e.g., Wi-Fi) is forbidden, significant bio-medical signal including the electrocardiography (ECG) and photoplethysmography (PPG) data can be transmitted. More lives could be saved anywhere by this potential advantage of VLC with a fast emergency response time. A multilevel transmission scheme is adopted to improve the data capacity with keeping simplicity, where data transmission rate can increase by log2m times (m is the number of voltage levels) than that of conventional VLC transmission based on on/off keying. In order to generate multi-amplitudes, resistor ladder circuit, which is a basic principle of digital to analog convertor, is employed, and information is transferred through LED (Light-Emitting Diode) with different voltage level. In the receiver side, multilevel signal is detected by optical receiver including a photo diode. Then, the collected data are analyzed to serve the necessary medical care to the concerned patient.

• Nuclear Engineering and Technology
• /
• 제56권6호
• /
• pp.2324-2331
• /
• 2024

The current study investigated Saudi Arabian oil fly ash impacts on Egyptian clay bricks' structural and radiation shielding properties. To produce the required bricks, crushed clay minerals from the Hafafit area were mixed with 0, 10, 20, 30, and 40 % wt.% Saudi Arabian oil fly ash and pressed at a pressure rate of 68.55 MPa. Identification of the minerals in the chosen clay was achieved via X-ray diffraction. Additionally, the material's morphology and chemical composition were determined through scanning electron microscope and energy-dispersive X-ray. The fabricated bricks' density was reduced by 36.3 % through increasing the concentration of fly ash from 0 to 40 wt%. Then, the fly ash addition's influence on the fabricated clay bricks' γ-ray shielding properties was investigated by Monte Carlo simulation, which found a reduction in the fabricated bricks' linear attenuation coefficient (LAC) by 41.2, 36.0, 33.8, and 33.8 % at the 0.059, 0.103, 0.662, and 1.252 MeV γ-ray energies, respectively. The LAC reduction caused an increase in the fabricated bricks' half-value thickness, transmission factor, and the equivalent thickness of the lead. Moreover, the thicker fabricated sample thicknesses were found to have high γ-ray shielding capacity and can thus be used in radiation shielding applications.

• 한국태양에너지학회 논문집
• /
• 제28권3호
• /
• pp.35-44
• /
• 2008

In this study, the experiment of the measuring of four different types of flooring materials' thermal characteristics was conducted and examined during the summer. The experimental materials were arranged on the existing slab of the roof, and then its thermal characteristics were examined from the point of view of thermal radiation analysis. The aim of this study is ultimately to draw the fundamental data for improvements in a building's thermal function and reduce the urban heat island phenomena through optimizing the thermal characteristics of the surface covering materials of a building. The results from this study are as follows; 1) Each experimental material's albedo was calculated as 0.83 on the aluminum panel, 0.40 on the rock block, 0.37 on the wood deck and 0.21 on the concrete. It shows that the concrete material, which has the lowest short wave reflective rate, absorbed the most radiation energy and the aluminium panel has absorbed the lowest radiation energy. 2) From the each experimental object's value of the long wave radiation, the concrete material measured the highest, at $628W/m^2$, and the aluminium panel measured the lowest at $412W/m^2$. Therefore, it verifies that the experimental objects' own radiation rate determines the amount of the long wave radiation. 3) The degree of energy absorbency of a building's surface covering materials is greatly influenced by its own albedo and radiation rate, Therefore, it needs to be considered for the improvements in a building's thermal function and reducing the urban heat island phenomena. 4) According to the evaluation result of the each experimental object's overall heat transmission screening function on the roof of a building, the wooden deck is proven to be an excellent material for excluding the outside temperature differences effectively with its characteristic of low heat capacity and conduction. Also its surface temperature on the roof slab and the temperature difference during the day were both measured at low.

• Bulletin of the Korean Chemical Society
• /
• 제23권4호
• /
• pp.580-586
• /
• 2002

We investigated the effect of ionic component on crystalline morphology development during isothermal annealing in a sodium neutralized sulfonated poly(ethylene terephthalate) ionomer (Ion-PET) by time-resolved small-angle x-ray scattering (TR-SAX S) using synchrotron radiation. At early stage in Ion-PET, SAXS intensity at a low annealing temperature (Ta = 120 $^{\circ}C)$ decreased monotonously with scattering angle for a while. Then SAXS profile showed a peak and the peak position progressively moved to wider angles with isothermal annealing time. Finally, the peak intensity decreased, shifting the peak angle to wider angle. It is revealed that ionic aggregates (multiplets structure) of several nm, calculated by Debye-Bueche plot, are formed at early stage. They seem to accelerate the crystallization rate and make fine crystallites without spherulite formation (supported by optical microscopy observation). From decrease of peak intensity in SAXS,it is suggested that new lamellae are inserted between the preformed lamellae so that the concentration of ionic multiplets in amorphous region decreases to lower the electron density difference between lamellar crystal and amorphous region. In addition, analysis on the annealing at a high temperature (Ta = 210 $^{\circ}C)$ by optical microscopy, light scattering and transmission electron microscopy shows a formation of spherulite, no ionic aggregates, the retarded crystallization rate and a high level of lamellar orientation.

• 한국식물학회:학술대회논문집
• /
• 한국식물학회 1994년도 94 Symposium on Plant science September 10, 1994 Ewha Womans University, Seoul, Korea 94 식물학 심포지움 환경 스트레스와 식물의 반응
• /
• pp.29-39
• /
• 1994

Serious issues about the changes in the environmental conditions on earth associated with human activities have arisen, and the interest in these problems has increased. It is urgent to determine how the expansion of terrestrial UV-B radiation due to the stratospheric ozone depletion influences living matters. In this connection, we have been investigating the effects of UV-B radiation on the growth of rice cultivars (Oryza sativa L.). We report here some physiological and genetic aspects of resistance to inhibitory effects of UV-B radiation on growth of rice cultivars as described below. Elevated UV radiation containing large amount of UV-B and a small amount of UV-C inhibited the development of plant height, the photosynthetic rate and the chlorophyll content in rice plants in a phytotron. Similar results were obtained in experiments, in which elevated UV-V radiation. Similar results were obtained in experiments, in which elevated UV-B radiation (transmission down to 290 nm) was applied instead of UV-B radiation containing a small amount of UV-C. The inhibitory effects of UV radiation was alleviated by the elevated CO2 atmospheric environment or by the exposure to the high irradiance visible radiation. The latter suggested the possibility that the resistance to the effects of UV radiation was either due to a lower sensitivity to UV radiation or to a greater ability to recover from the injury caused by UV radiation through the exposure to visible radiation. The examination of cultivar differences in the resistance to UV radiation-caused injuries among 198 rice cultivars belonging to 5 Asian rice ecotypes (aus, aman, boro, bulu and tjeleh) from the Bengal region and Indonesia and to Japanese lowland and upland rice groups showed the following: Various cultivars having different sensitivities to the effects of UV radiation were involved in the same ecotype and the same group, and that the Japanese lowland rice group and the boro ecotype were more resistant. Among Japanese lowland rice cultivars, Sasanishiki (one of the leading varieties in Japan) exhibited more resistance to UV rakiation, while Norin 1 showed less resistance, although these two cultivars are closely related. It was thus indicated that the resistance to the inhibitory effects of UV radiation of rice cultivars is not simply due to the difference in the geographical situation where rice cultuvars are cultivated. Form the genetic analysis of resistance to the inhibitory effects of UV radiation on growth of rice using F2 plants generated by reciprocally crossing Sasanishiki and Norin 1 and F3 lines generated by self-fertilizing F2 plants, it was evident that the resistance to the inhibitory of elebated UV radiation in these rice plants was controlled by recessive polygenes.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.564-567
• /
• 2012

광섬유는 신호를 전달하는 통신용 섬유, 물체를 관찰하기 위한 이미지 섬유, 각종 센서용 광섬유로서 원자력분야에서 사용된다. 특히 센서용 섬유로서 라만 산란광을 이용한 온도감지 섬유와 광섬유 브래그 격자을 이용한 온도/스트레인 섬유, 광자기효과를 이용한 광회전센서 섬유 등은 이미 실용화되어 있다. 그러나 광섬유에 방사선을 조사하면 색중심(color center)이 생성되어 광의 투과성이 크게 저하되고, 방사선 환경에서 적용의 제한이 있다. 본 논문에서는 고준위 방사선환경에 대한 광섬유 센서의 적용을 위한 연구로서 Ge가 함유된 일반단일모드 광섬유에 대한 감마선 조사에 따른 전송손실 특성 평가를 수행하였다. 시험에 사용된 방사선원은 $Co^{60}$ 감마선원으로, 총 4시간동안 0.5kGy/hr, 2kGy/hr, 8kGy/hr의 선량률(dose rate)로 조사하였다. 그 결과 감마선조사에 의한 단일모드 광섬유의 전송손실이 뚜렷하게 나타났고, 동일 누적선량에서 선량률이 클수록 전송손실이 증가하는 선량률 효과와 조사 후 광섬유의 전송손실이 클수록 손실 회복율이 증가하는 열화(annealing) 특성을 보였다. 본 시험결과는 향후 광섬유의 내방사화 연구의 기초자료로 활용할 계획이다.

• 한국의학물리학회지:의학물리
• /
• 제22권1호
• /
• pp.12-17
• /
• 2011

본 연구는 노발리스용 치료테이블(couch top)을 투과하는 광자선의 감쇠율(attenuation rate)을 기하학적 모델을 통해 계산하고 보정함으로써, 치료부위에 정확한 선량이 전달되게 하는데 그 목적이 있다. 실험은 치료테이블을 투과하는 광자선의 투과율과 감쇠율을 기하학적인 모델에 의해 예측하고 이를 바탕으로 실험적으로 측정된 것을 비교 및 분석하였다. 그 결과 기하학적 모델에 의해 예측된 값과 실험값이 매우 잘 일치하는 것으로 나타났다. 또 실제 임상적용의 가능여부를 판단하기 위하여, 척추 방사선수술(spine radiosurgery)환자의 치료계획에 모델링화한 감쇠율을 보정한 뒤 측정한 중심점 선량과 그렇지 않은 것을 비교하였더니, 전자가 치료계획된 것과의 오차율이 감소함을 보였다. 본 논문에서는 치료테이블을 투과하는 광자선의 기하학적 모델을 통해 투과율과 감쇠율을 계산하고 이를 실험적으로 증명하였다. 이 방법은 노발리스를 이용한 방사선 수술뿐만 아니라 일반적인 방사선 치료에 있어서도 매우 유용할 것으로 판단된다.