• Title/Summary/Keyword: radiation concentration

Search Result 1,018, Processing Time 0.028 seconds

Assessment of sediment profiles applying nuclear techniques: use of a nucleonic gauge in Panama Canal watershed

  • Xavier Sanchez;Henry Hoo;Patrick Brisset;Reinhardt Pinzon
    • Nuclear Engineering and Technology
    • /
    • v.54 no.11
    • /
    • pp.4236-4243
    • /
    • 2022
  • An industrial nuclear technique based on the use of an X-ray profiler was implemented to estimate the densities or concentrations of sediments present in an Atlantic maritime zone in the areas subjected to dredging under the governance of the Panama Canal Authority (ACP). The sediment profiles show in most areas there is a concentration of between 1.00-1.15 g/cm3 except for one area in particular, the density starts at 1.20 g/cm3 and even reaches values greater than 1.50 g/cm3; therefore, an already consolidated sediment is present, which, depending on the depth found. Values of 1.265 g/cm3, 1.297 g/cm3, 1.185 g/cm3 obtained by ACP previous studies are within the range of 1.20-1.30 g/cm3 measured with the nucleonic gauge. However, it should be noted that during the tests with the X ray profiler, sediment densities values greater than the aforementioned limit were also obtained that varying according at depths close to 12 m and 18 m with values reached up to 1.513 g/cm3 and 1.60 g/cm3, respectively. This demonstrates that sediment accumulation depends on depth. This nucleonic gauge is feasible technique for the study of the sedimentation phenomenon in channel basins and even in other projects nationwide.

Influence of operation of thermal and fast reactors of the Beloyarsk NPP on the radioecological situation in the cooling pond: Part II, Macrophytes and fish

  • Aleksei Panov ;Alexander Trapeznikov;Vera Trapeznikova ;Alexander Korzhavin
    • Nuclear Engineering and Technology
    • /
    • v.55 no.2
    • /
    • pp.707-716
    • /
    • 2023
  • The influence of waste technological waters of thermal and fast reactors of Beloyarsk NPP (Russia) on the accumulation of 60Co, 90Sr and 137Cs in macrophytes and ichthyofauna of the cooling pond has been studied. Critical radionuclides, routes of their entry into the ecosystem and periods of maximum discharge of radioisotopes into the cooling pond have been determined. It is shown that the technology of electricity generation at the Beloyarsk NPP, based on fast reactors, has a much smaller effect on the release of artificial radionuclides into the environment. Therefore, during the entire period of monitoring studies (1976-2019), the decrease in the specific activity of radionuclides of NPP origin in macrophytes was 13-25800 times, in ichthyofauna 1.5-44.5 times. The maximum discharge of artificial radionuclides into the Beloyarsk reservoir was noted during the period of restoration and decontamination work aimed at eliminating the emergencies at the AMB reactors of NPP. The factors influencing the accumulation of artificial radionuclides in the components of the freshwater ecosystem of the Beloyarsk cooling pond have been determined, including: the physicochemical nature of radioisotopes, their concentration in surface water, the temperature of the aquatic environment, the trophicity of the reservoir, the species of hydrobionts.

Numerical and statistical analysis of Newtonian/non-Newtonian traits of MoS2-C2H6O2 nanofluids with variable fluid properties

  • Manoj C Kumar;Jasmine A Benazir
    • Advances in nano research
    • /
    • v.16 no.4
    • /
    • pp.341-352
    • /
    • 2024
  • This study investigates the heat and mass transfer characteristics of a MoS2 nanoparticle suspension in ethylene glycol over a porous stretching sheet. MoS2 nanoparticles are known for their exceptional thermal and chemical stability which makes it convenient for enhancing the energy and mass transport properties of base fluids. Ethylene glycol, a common coolant in various industrial applications is utilized as the suspending medium due to its superior heat transfer properties. The effects of variable thermal conductivity, variable mass diffusivity, thermal radiation and thermophoresis which are crucial parameters in affecting the transport phenomena of nanofluids are taken into consideration. The governing partial differential equations representing the conservation of momentum, energy, and concentration are reduced to a set of nonlinear ordinary differential equations using appropriate similarity transformations. R software and MATLAB-bvp5c are used to compute the solutions. The impact of key parameters, including the nanoparticle volume fraction, magnetic field, Prandtl number, and thermophoresis parameter on the flow, heat and mass transfer rates is systematically examined. The study reveals that the presence of MoS2 nanoparticles curbs the friction between the fluid and the solid boundary. Moreover, the variable thermal conductivity controls the rate of heat transfer and variable mass diffusivity regulates the rate of mass transfer. The numerical and statistical results computed are mutually justified via tables. The results obtained from this investigation provide valuable insights into the design and optimization of systems involving nanofluid-based heat and mass transfer processes, such as solar collectors, chemical reactors, and heat exchangers. Furthermore, the findings contribute to a deeper understanding of stretching sheet systems, such as in manufacturing processes involving continuous casting or polymer film production. The incorporation of MoS2-C2H6O2 nanofluids can potentially optimize temperature distribution and fluid dynamics.

Conceptual design study on Plutonium-238 production in a multi-purpose high flux reactor

  • Jian Li;Jing Zhao;Zhihong Liu;Ding She;Heng Xie;Lei Shi
    • Nuclear Engineering and Technology
    • /
    • v.56 no.1
    • /
    • pp.147-159
    • /
    • 2024
  • Plutonium-238 has always been considered as the one of the promising radioisotopes for space nuclear power supply, which has long half-life, low radiation protection level, high power density, and stable fuel form at high temperatures. The industrial-scale production of 238Pu mainly depends on irradiating solid 237NpO2 target in high flux reactors, however the production process faces problems such as large fission loss and high requirements for product quality control. In this paper, a conceptual design study of producing 238Pu in a multi-purpose high flux reactor was evaluated and analyzed, which includes a sensitivity analysis on 238Pu production and a further study on the irradiation scheme. It demonstrated that the target structure and its location in the reactor, as well as the operation scheme has an impact on 238Pu amount and product quality. Furthermore, the production efficiency could be improved by optimizing target material concentration, target locations in the core and reflector. This work provides technical support for irradiation production of 238Pu in high flux reactors.

Swelling at high radiation damage levels of 120 and 240 dpa in 3.5 MeV self-ion irradiated ferritic/martensitic steels

  • Myeongkyu Lee;Geon Kim;Sangjoon Ahn
    • Nuclear Engineering and Technology
    • /
    • v.56 no.10
    • /
    • pp.4115-4126
    • /
    • 2024
  • The swelling behavior of ferritic/martensitic steels (FC92-B/-N, HT9, and Gr.92) was investigated following 3.5 MeV Fe++ ion irradiation. Tested alloys were helium-pre-implanted up to the peak contents of 120 and 240 appm with He/dpa ratio of 1 appm/dpa at room temperature and then exposed to self-ion beam to the peak damage conditions of 120 and 240 dpa at 475 ℃. Field-emission transmission electron microscopy was used to characterize the cavity evolution. FC92-B exhibited the highest resistance to swelling among the irradiated alloys. The final volumetric swelling of FC92-B reached 1.3 % at 70 dpa and 2.9 % at 140 dpa. On the other hand, HT9 exhibited the highest swelling, reaching 7.4 % at 140 dpa. Comparing the present swelling results at 140 dpa/140 appm He with swelling data at 280 dpa/280 appm He from our previous study, it was observed that Gr.92 and FC92-N swelled more at 140 dpa/140 appm He than at 280 dpa/280 appm He. This negative correlation between swelling and dose in Gr.92 and FC92-N is primarily attributed to the helium-associated swelling suppression at higher helium concentration of 280 appm. A bimodal cavity size distribution appeared only in Gr.92 and FC92-N at 280 dpa/280 appm. This result demonstrates that the excess amount of helium over 200 appm promoted early-stabilization of new-born cavities, resulting in preferentially enhanced cavity nucleation, while impeding the growth of nucleated cavities. An inhibition in cavity growth possibly led to an extended duration of nucleation-dominant stages, finally suppressing swelling in ion-irradiated Gr.92 and FC92-N alloys.

Measurement of Radon Daughters' Radioactivities by Using Single Filtering Method (단일집진법(單一集塵法)에 의(依)한 라돈 붕괴생성물(崩壞生成物)의 농도측정(濃度測定))

  • Chang, Si-Young;Ro, Seung-Gy;Hong, Jong-Sook
    • Journal of Radiation Protection and Research
    • /
    • v.6 no.1
    • /
    • pp.25-30
    • /
    • 1981
  • A measurement has been made for the radioactivities (or concentrations) of radon daughters, i.e., RaA, RaB and RaC in airborne dust by means of single filtering method. This is to evaluate the radioactivities in terms of Ci or WL (working level) from gross alpha counts measured in the selected-time intervals after an air sample is taken from a membrane filter paper with a mean pore size of $0.8{\mu}m$. This work involves determinations of standard deviation in radioactivities, radioactive equilibrium factor and ratio. It appears that a concentration of total radon daughters is $0.30{\sim}2.36pCi/l\;or\;0.89{\times}10^{-3}{\sim}6.57{\times}10^{-3}WL$, depending on the sampling time. Generally the highest concentration was observed around nine o'clock in a day while the lowest value was obtained around seventeen o'clock. Standard deviations based on counting statistics of RaA's, RaB's and RaC's concentrations are ${\pm}57.75%,\;{\pm}22.32%\;and\;{\pm}31.29%$, respectively. It is revealed that the radioactive equilibrium factor is 0.322 while the radioactive equilibrium ratio is of pattern $C_1>C_2>C_3$ in general. Here $C_1,\;C_2\;and\;C_3$ stand for concentrations of RaA,RaB and RaC, respectively.

  • PDF

Establishment of Release Limits for Airborne Effluent into the Environment Based on ALARA Concept (ALARA 개념(槪念)에 의한 기체상방사성물질(氣體狀放射性物質)의 환경방출한도(環境放出限度) 설정(設定))

  • Lee, Byung-Ki;Cha, Moon-Hoe;Nam, Soon-Kwon;Chang, Si-Young;Ha, Chung-Woo
    • Journal of Radiation Protection and Research
    • /
    • v.10 no.1
    • /
    • pp.50-63
    • /
    • 1985
  • A derivation of new release limit, named Derived Release Limit(DRL), into the atomsphere from a reference nuclear power plant has been performed on the basis of the new system of dose limitation recommended by the ICRP, instead of the (MPC)a limit which has been currently used until now as a general standard for radioactive effluents in Korea. In DRL Calculation, a Concentration Factor Method was applied, in which the concentrations of long-term routinely released radionuclides were in equilibrium with dose in environment under the steady state condition. The analytical model used in the exposure pathway analysis was the one which has been suggested by the USNRC and the exposure limits applied in this analysis were those recommended by the USEPA lately. In the exposure pathway analysis, all of the pathways are not considered and some may be excluded either because they are not applicable or their contribution to the exposure is insignificant compared with other pathways. In case, the environmental model developed in this study was applied to the Kori nuclear power plant as the reference power plant, the highest DRL value was calculated to be as $9.10{\times}10^6Ci/yr$ for Kr-85 in external whole body exposure from the semi-infinite radioactive cloud, while the lowest DRL value was observed 3.64Ci/yr for Co-60 in external whole body exposure from the contaminated ground, by the radioactive particulates. The most critical exposure pathway to an individual in the unrestricted area of interest (Kilchun-Ri, 1.3 km to the north of the release point) seems to be the exposure pathway from the contaminated ground and the most critical radionuclide in all pathways appears to be Co-60 in the same pathway. When comparing the actual release rate from KNU-l in 1982 with the DRL's obtained here the release of radionuclides from KNU-1 were much lower than the DRL's and it could be conclued that the exposure to an individual had been kept below the exposure limits recommended by the USEPA.

  • PDF

Quality Characteristics of Cookies with Hot Water Extract of Seamustad (Undaria pinnatifida) Sporophylls and Treated with Gamma Irradiation (감마선 조사된 미역귀(Undaria pinnatifida Sporophyll) 열수추출물을 첨가한 쿠키의 품질 특성)

  • Kim, Da-Mi;Kim, Kyoung-Hee;Yun, Young-Sik;Kim, Jae-Hun;Lee, Ju-Woon;Yook, Hong-Sun
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.40 no.11
    • /
    • pp.1604-1611
    • /
    • 2011
  • In this study we assessed the effects of gamma irradiation (50 kGy) on cookies to which was added various concentrations (1%, 3%, 5%, 7%) of hot water extract from seamustad (Undaria pinnatifida) sporophylls (WEUS) for future industry use. The pH of the dough went down significantly with the addition of WEUS. However, density was not related to that. The spread ratio of the cookies increased significantly as more WEUS was added to the cookie recipe, and cookies containing gamma-irradiated extract were taller than non-irradiated cookies with the same concentration. The loss rate of cookies was the same between control and experiment groups. On the other hand, the leavening rate significantly increased upon the addition of WEUS, and gamma-irradiated cookies were higher than non-irradiated cookies in the same concentration. The L value of cookies was much reduced with higher WEUS content, but the b value showed no significant differences between the control and experiment groups. The a value showed no significant difference for non-irradiated groups, but did for gamma-irradiated groups. Upon the addition of WEUS, hardness was shown to be higher than the control. The antioxidant activity, DPPH radical scavenging, was significantly higher with the control cookies, and upon the addition of WEUS, the gamma-irradiated cookies had higher antioxidant effects than non-irradiated cookies. The sensory evaluation showed that cookies made with WEUS have a positive impact in color, smell, taste, texture, and overall acceptability, but the sensory evaluation worsened with a lot of WEUS. The results of acceptability were higher in cookies with 3% the non-irradiated group and 1% the gamma-irradiated group. These results suggest that the 1% gamma-irradiated group was in the best condition to use in the industry since just a little of it makes exceptional quality, sensory properties, and functionality.

Study on characteristics of specific hazardous substances in the industrial wastewater effluent (사업장 방류수 중 특정수질유해물질 배출 특성 연구)

  • Kim, Seungho;Choi, Youngseop;Kim, Yunhee;Kim, Jongmin;Chang, Gilsik;Bae, Seokjin;Cho, Younggwan
    • Analytical Science and Technology
    • /
    • v.29 no.3
    • /
    • pp.114-125
    • /
    • 2016
  • In this study, 165 wastewater discharge facilities in 10 business types were investigated with regard to 24 specific hazardous substances that included heavy metals, VOCs, CN, and phenol in the Gwangju city. Cu in the range from from 0.008 to 35.420 mg/L was detected in all business types and the detection rate was 46.8 %. Other heavy metals, such as Cd, As, Hg, Pb, and Cr+6 were detected as well. However, their detection rates ranged between 0.6 and 1.8 %. CN and phenol were detected in one and five facilities, respectively. 12 species of VOCs were detected: chloroform 80.6 % (0.42 to 81.60 μg/L), benzene 16.4 % (1.49 to 3.31 μg/L), trichloroethylene 11.5 % (1.78 to 6.02 μg/L), 1,1-dichloroethylene 10.3 % (1.23 to 5.89 μg/L), and dichloromethane 8.5 % (0.28 to 968.86 μg/L) in the detection rate order. The concentration of VOCs was detected in trace amounts, except for dichloromethane that exceeded the effluent quality standard in three business types, namely, metal manufacturing, food industry, and car washing facility. Chloroform was detected in all business types, where 24.88 μg/L were detected in the laundry business and 53.41 μg/L in the water supply business; the mean concentration of chloroform in these two business types was higher than elsewhere. Therefore, for the disposal of non-degradable specific hazardous substances in industrial wastewater, it is necessary to introduce physical and chemical processes, such as activated carbon adsorption, fenton oxidation, ozone treatment, as well as photocatalyst and the UV radiation.

Cellular Antioxidant Activity and Whitening Effects of Dendropanax morbifera Leaf Extracts (황칠나무 잎 추출물의 세포 항산화 활성과 미백활성 측정)

  • Park, Su Ah;Park, Jun;Park, Chan Il;Jie, Young Jong;Hwang, Yun Chan;Kim, Yong Hyun;Jeon, So Ha;Lee, Hye Mi;Ha, Ji Hoon;Kim, Kyeong Jin;Park, Soo Nam
    • Microbiology and Biotechnology Letters
    • /
    • v.41 no.4
    • /
    • pp.407-415
    • /
    • 2013
  • In this study, we investigated the antioxidant activities on HaCaT and the whitening effects on B16F1 melanoma cells of Dendropanax morbifera leaf extract. In an antioxidative activity assay using HaCaT cells, the ethyl acetate ($50{\mu}g/ml$) and aglycone fractions ($25{\mu}g/ml$) of the D. morbifera leaf extract didn't exhibit any characteristics of cytotoxicity. When HaCaT cells were exposed to a single large dose ($800mJ/cm^2$) of UVB, the extracts protected the cells against UVB radiation. When HaCaT cells were treated with 10 mM $H_2O_2$ and $4{\mu}M$ rose bengal, the ethyl acetate ($6.25{\sim}50{\mu}g/ml$) and aglycone ($6.25{\sim}25{\mu}g/ml$) fractions protected the cells against oxidative damage in a concentration dependent manner. When the whitening effects of D. morbifera leaf extract were tested in melanoma B16/F1 cells treated with the a-melanocyte stimulating hormone (${\alpha}$-MSH), the extracts inhibited ${\alpha}$-MSH-stimulated intra/extracellular melanogenesis in a concentration dependent manner. The inhibitory effects of the ethyl acetate and aglycone fractions of D. morbifera leaf extract were 21% and 44% at $25{\mu}g/ml$, respectively. Both are more effective than arbutin (15% at $25{\mu}g/ml$) which is known as a whitening agent. These results indicate that fractions of the D. morbifera leaf can function as cell protectants and natural antioxidants in biological systems, particularly skins exposed to UV radiation by quenching and/or scavenging $^1O_2$ and other ROS, and protecting cells against ROS. In addition, fractions of the D. morbifera leaf can be applied to new whitening cosmetics because of their inhibitory effects on ${\alpha}$-MSH stimulated melanogenesis in B16F1 melanoma cells.