• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.268-272
• /
• 2002

A study to determine the structure-borne noise radiated by a dash panel of a real car is performed by using the finite element method (FEM) and the boundary element method (BEM). The radiation efficiency is used to estimate the structure-borne noise radiated by a dash panel. The curved surfaces of a dash panel change the radiation efficiency. Experimental results of radiation efficiency of a simple rectangular plate and a dash panel show good agreements with the simulation results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.518-523
• /
• 2009

Main source of URN(Underwater Radiated Noise) which is related to the ship's survivability is divided into two groups. Cavitation is main source of URN when the speed of ship is upper than CIS(Cavitation Inception Speed). But when the speed of ship is lower than CIS, main source of URN is structure-borne noise on the hull which is originated from propulsion system, pump system or transmitted vibration of pipe system. In this paper, to reduce the vibration of discharge pipe and valve system, back flow prevent globe valve and new rubber mount are applied to the ship. As the result of applying new valve and mount, the vibration is reduced drastically.

• 한국소음진동공학회논문집
• /
• 제25권11호
• /
• pp.747-752
• /
• 2015

Underwater radiated noise is an important characteristic in the naval weapon systems. It is difficult to measure the radiation efficiency of underwater vehicle, such as UUV(unmanned underwater vehicle) and underwater weapons in real operation environment. In this study, acoustic radiation efficiency of a circular cylindrical structure is measured in the laboratory-water tank. The radiation efficiency is compared with the numerical results and it is found that they are in a good agreement. Therefore, the measurement method can be applied effectively for predicting the underwater radiation noise and effectiveness of radiation reduction means.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1081-1085
• /
• 2002

A modeling is developed to predict the isolation performance of sound barrier systems under the sound pressure radiated from excited by point impact. The predicted results are compared with the measured results obtained by using APAMAT II. This instrument provides a combination of structure-borne noise and air-borne noise, which corresponds to rolling noise, by applying the excitation system projected steel balls against the steel sheet.

• 한국소음진동공학회논문집
• /
• 제19권6호
• /
• pp.599-606
• /
• 2009

Main source of URN(underwater radiated noise) which is related to the ship's survivability is divided into two groups. Cavitation is the main source of URN when the speed of ship is upper than CIS(cavitation inception speed). But when the speed of ship is lower than CIS, the main source of URN is the structure-borne noise on the hull which is originated from propulsion system, pump system and trnasmitted vibration of the pipe system. In this paper, to reduce the vibration of discharge pipe and valve system, back flow prevent globe valve and new rubber mount are applied to the ship. As the result of applying new valve and mount, the vibration is reduced drastically.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.266-271
• /
• 1996

Optimal design of disk shaped piezoelectric actuator and sensor mounted on the plate structure is studied for the control of noise radiated fro the structure. The sensor signal is returned to the actuator through negative gain. Finite element modelling is used for the plate structure and the disk shaped piezoelectric sensor and actuator. The objective function is the total radiated sound power and the design variables are the locations and sizes of the piezoelectric actuator and sensor. The optimal is performed at the resonance and the off resonance frequency and the results show good noise reduction.

• 한국산학기술학회논문지
• /
• 제20권1호
• /
• pp.179-183
• /
• 2019

전력 변환에는 전력 효율과 함께 전력 변환시스템의 소형화를 위해 적용하는 스위칭에 의한 잡음으로부터 시스템 안정성이 보장되어야 한다. 따라서 전력 변환시 스위칭 잡음을 감소시킬 수 있는 대책이 필수적이다. 따라서 이전 논문에는 MPS사의 MPQ4432 드라이버를 이용하여 DC/DC Buck Converter회로를 구성한 후 이를 reference plane을 갖는 4층 PCB 회로 구조에서 부품의 배치가 서로 다른 경우 발생하는 스위칭 잡음특성을 시뮬레이션 하였다. 본 논문에서는 시뮬레이션을 진행한 서로 다른 두 회로를 제작하여, 시뮬레이션과 동일하게 Conducted Emission특성과 Radiated Emission 특성을 분석하였다. 또한 측정결과와 시뮬레이션 결과와 비교하였다. 그 결과 Current Return Path의 구성에 따라 Conducted Emission특성이 저주파대역에서는 2~9dB, 고주파대역에서는 6~7dB 감소됨을 확인하였다. 그리고 Radiated Emission특성은 9dB 감소됨을 확인하였다. Conducted Emission 시뮬레이션 결과 저주파대역에서 6~7dB이고, 측정 결과는 2~9dB로 다소차이가 있음을 확인하였고, 고주파대역에서는 실험과 시뮬레이션에서 모두 7dB정도임을 확인하였다. 그리고 Radiated Emission은 시뮬레이션에서 12dB 감소를 확인하였지만, 측정결과 9dB의 감소를 확인하였다. 이로써 다소 감소량에는 차이가 확인되었지만 전력변환회로를 설계할 경우 Current return path의 구성에 따라 잡음 특성을 향상시킬 수 있음을 확인하였다.

• 한국음향학회지
• /
• 제42권3호
• /
• pp.250-261
• /
• 2023

본 연구에서는 펌프젯 추진기를 대상으로 공동, 비공동 조건에서의 유동 소음원을 규명하기 위하여 추진기의 각 구성품인 덕트와 스테이터, 로터에 의한 소음 기여도를 평가하였으며, 공동과 비공동 조건에서의 소음 수준을 비교하였다. 대형 캐비테이션 터널 내 Suboff 잠수함 선형과 펌프젯 추진기를 대상으로 균일혼상류 가정의 비정상 비압축성 Reynolds averaged Navier-Stokes(RANS) 방정식을 적용하였으며, 이상 유동을 모사하기 위해 Volume of Fluid(VOF) 기법과 Schnerr-Sauer 공동 모델을 적용하였다. 유동해석 결과를 기반으로 수중방사소음을 예측하기 위해 Ffowcs Williams and Hawkings(FW-H) 방정식 기반의 음향상사법을 적용하였으며, 덕트와 스테이터, 로터로 구성된 3개의 비투과성 적분면과 추진기를 감싸는 형태의 2가지 투과성 적분면을 선정하여 소음 기여도를 평가하였다. 소음 예측결과로부터 스테이터는 전체 소음에 대한 직접적인 기여도는 낮으나 덕트와 로터에서의 유동 박리에 의한 소음원 형성에는 영향을 미치는 것을 확인하였으며, 유동이 박리되는 연직상방과 우측방향으로 소음이 크게 방사되었다. 또한 로터에서는 날개의 흡입면과 압력면 간의 압력 섭동에 의해 추진방향으로 소음이 크게 방사되었으며, 투과성적분면을 통해 체적 소음원인 공동의 효과를 반영할 수 있음을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.333-337
• /
• 2003

The use of reactive shearing structural intensity to place small patches of constrained layer damping material in order to achieve the largest reduction in the radiated sound power of Air-conditioner outdoor unit is described. The normal surface velocity of each panel was measured using a laser doppler vibrometer. Experimental results indicated that patches of constrained layer damping material placed over areas of high reactive structural intensity reduced the radiated sound power significantly more than patches of the same area placed over areas of low reactive structural intensity

• 소음진동
• /
• 제9권2호
• /
• pp.371-376
• /
• 1999

The purpose of this study is to identify the dynamic characteristics of a motor-die in washing machine and provide quantitative design information needed for reduction of radiated sound from the motor-die. To perform the design analysis, dynamic characteristics are identified by motor-die modeling and the availability of model is verified by experimental modal analysis. Numerical approach using MSC/NASTRAN and SYSNOISE predicted sound attenuation effects according to the change of design parameters, such as thickness, concentrated mass and rib. The numerical results due to the rib attachment showed the significant noise attenuation effects over 15 dB in the frequency range of 450∼700 Hz.