• International Journal of Precision Engineering and Manufacturing
• /
• 제5권2호
• /
• pp.16-21
• /
• 2004

An elastomeric bushing is a device used in automotive suspension systems to reduce the load transmitted from the wheel to the frame of the vehicle. The relation between the load applied to the shaft or sleeve and the relative displacement of elastomeric bushing is nonlinear and exhibits features of viscoelasticity. A load-displacement relation for elastomeric bushing is important fur dynamic numerical simulations. A boundary value problem fur the bushing response leads to the load-displacement relation, which requires complex calculations. Therefore, by modifying the constitutive equation for a nonlinear viscoelastic incompressible material developed by Lianis, the data for the elastomeric bushing material was obtained and this data was used to derive the new load-displacement relation for radial response of the bushing. After the load relaxation function for the bushing was obtained from the step displacement control test, Pipkin-Rogers model was developed. Solutions were allowed for comparison between the results of the modified Lianis model and those of the proposed model. It was shown that the proposed Pipkin-Rogers model was in very good agreement with the modified Lianis model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.72_73
• /
• 2009

The industrial power system has the radial plant distribution system and domestic generators to supply the essential loads. When the system is isolated from the utility tie line, the system frequency drops resulting in the trip of generators. The load shedding scheme shall be properly designed to secure the essential load. In this paper two kinds of load shedding schemes, those are, the Fast Act Load Shedding(FALS) and Under Frequency Load Shedding(UFLS) are simulated and compared taking an example of petrochemical gas separation plant.

• 한국공간구조학회논문집
• /
• 제17권2호
• /
• pp.21-32
• /
• 2017

The objective of this study is to analysis the mechanical characteristics on the geometric nonlinear behavior of radial cable roof systems for long span retractable cable roof structures. The retractable roof is designed as a full control system to overcome extreme outdoor environments such as extreme hot or cold weather, strong wind or sunlight, and the cable roof greatly can reduce roof weight compared to other rigid structural system. A retractable cable roof system is a type of structures in which the part of entire roof can be opened and closed. The radial cable roof is an effective structural system for large span retractable roofs, the outer perimeter of the roof is a fixed membrane roof and the middle part is a roof that can be opened and closed. The double arrangement cables of a radial cable truss roof system with reverse curvature works more effectively as a load bearing cables, the cable system can carry vertical load in up and downward direction. In this paper, to analyze the mechanical characteristics of a radial cable roof system with central posts, the authors will investigate the tensile forces of bearing cables, stabilized cables, ring cables, and the deflection of roof according to the height of the post or hub that affects the sag ratio of cable truss. The tensile forces of the cables and the deflection of the roof are compared for the cases when the retractable roof is closed and opened.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.208-210
• /
• 2000

In this paper, we present a method for mitigating the effect of voltage sag in radial power distribution systems using load transfer switching (LTS). The term of LTS is defined that the weakness load points for voltage sag transfer to the alternative source during the fault clearing practices. The sequences of proposed LTS method is divided into the search of weakness points for voltage sag using the risk assessment model and transfer behavior of weakness points. Through the case studies, we verify the effectiveness of proposed LTS method and present the searching method of effective application points of LTS method using the risk assessment model.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권3호
• /
• pp.118-123
• /
• 2000

This paper presents an efficient algorithm for loss reduction and load balancing by sectionalizing switch operation in large scale distribution system of radial type. We use Genetic algorithm and Kruskal algorithm to solve distribution system reconfiguration. Genetic algorithm is used to minimize objective function including loss and load balancing items. Kruskal algorithm is used to satisfy the radial condition of distribution system. The experimental results show that the proposed method has the ability to search a good solution regardless of initial configuration and size of system.

• 조명전기설비학회논문지
• /
• 제22권4호
• /
• pp.46-53
• /
• 2008

본 연구에서는 고조파를 고려한 방사기저함수 네트워크 기반의 부하모델링 기법을 개발하였다. 개발된 부하모델은 입력정보로서 기본 주파수와 기본 전압 외에 고조파 성분도 고려하여 전압 및 주파수뿐만 아니라 고조파의 영향에 대해서도 효과적으로 부하를 추정할 수 있도록 구성하였다. 부하모델링을 위해 적용된 방사기저함수 네트워크는 기존에 널리 사용되는 다층 신경망에 비해 구조가 간단하고 수렴속도가 빠른 장점을 지니고 있다. 개발된 부하모델링 기법은 기존에 널리 사용되는 다항식과 다층 신경회로망 및 고조파 성분을 고려하지 않은 방사기저함수 네트워크를 이용한 부하모델 기법과 비교함으로써 제안방법의 타당성을 검증하였다.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1166-1180
• /
• 1990

본 연구에서는 열간 반경단조를 해석하는데 있어서 재료의 변형 해석은 강-점 소성해석법으로 해석하고 온도분포도 유한 요소법으로 해석한다.

• 한국정보처리학회논문지
• /
• 제4권7호
• /
• pp.1749-1758
• /
• 1997

전력수요의 예측은 예측기간에 따라 중장기 전력수요 예측과 단기 부하 예측으로 구분할 수 있다. 기존의 단기 부하예측은 주로 역전파 알고리즘(back propagation algorithm)다층퍼셉트론을 이용하여 예측을 하였으나 이는 학습시간이 많이 걸릴 뿐만 아니라 학습도중에 지역최소점(local minima)에 빠져 학습이 계속되지 못한다는 문제가 있다. 본 논문은 이러한 역전파 알고리즘의 문제점을 해결할 수 있는 방법으로 Radial Basis 함수(Radial Basis Function)를 이용하여 동적 단기부하 예측 모형을 제안한다. Radial Basis 함수는 하나의 은닉층(hidden layer)을 갖고 있으며, 전방향(feed-forward)학습을 한다는 특징이 있다. 본 논문에서 제안한 단기 부하 예측모형은 학습을 하기 위하여 시간대별 부하량을 클러스터링 하고, 이 클러스터의 중심값을 Radial Basis 함수의 은닉층으로 하여 학습을 한 다음 예측하고자 하는 패턴을 한 단위로 하여 시단대별로 예측하였다. 기존의 연구에서의 클러스터링 방법으로는 통계학의 K-Means 방법이나 Kohonen의 LVQ(Learning Vector Quantization)을 주로 이용하였으나 본 논문에서는 패턴의 분류에 있어서 다른 알고리즘보다 편차가 작은 Pal, et. al.의 GLVQ(Generalized LVQ) 알고리즘을 이용하였다. 본 논문에서 이용한 데이타는 1995년 3월 1일-3일, 6월 1일-3일, 7월 1일-3일, 9월 1일-3일, 11월 1일-3일의 72시간 데이타를 입력하여 월별 4일의 24시간의 예측시간으로 예측하였다. 실험결과 월별 1일과 3일까지의 학습데이타로 1시간 후의 부하량을 24시간동안 예측한 결과 1.3795%의 평균 오차율로 예측하였다.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.76-83
• /
• 2001

This paper is concerned with the analysis of the forming characteristics of radial-backward extrusion. The single action pressing is analyzed by using the rigid-plastic FEM. The design factors such as die corner radius, gap height, and friction factor are involved in the simulation. The analysis is focused on the influences of the design factors on the maximum punch farce and metal flow into can and flange region. As a result of analysis, the gap height among the design factors is known to have a major effect on the metal flow of radial-backward extrusion for single action pressing compared with other design factors. As is expected, forming load and volume of flange increase as gap height and die corner radius increase, respectively.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.551-554
• /
• 1999

In this paper, we developed a radial pulse transducer that has strain-gauge cantilever type load cell for total pulse detection on chongu arterial. The transducer consist of load cell and driving electronic circuits. Load cell consist of cantilever and two metal film strain gauge. The Pressure signal from chongu artery is delivered to load cell using artery rider that attached to cantilever Therefore the pressure signal convert to voltage signals by the developed transducer As the results of experiment, the developed transducer has very good linearity at pressure to voltage conversion. The total pulse detection transducer can detected three kinds of chongu artery pulse with conveniently.