• 대한수학회논문집
• /
• 제24권4호
• /
• pp.561-564
• /
• 2009

A holomorphic function space in the unit disc D satisfying $\int_D|f'(z)|^p(1-|z|^2)^{p-1}dA(z)$<$\infty$ is quite close to $H^p$. The problems on the existence of the radial limits are considered for this space. It is proved that the situation for p > 2 is totally different from the situation for p $\leq$ 2.

• 한국소음진동공학회논문집
• /
• 제22권10호
• /
• pp.959-967
• /
• 2012

The theory for a new electromagnetically biased diskless combined radial and axial magnetic bearing is developed. A typical magnetic bearing system is composed of two radial magnetic bearings and an axial magnetic bearing. The axial magnetic bearing with a large axial disk usually limits rotor dynamic performance and makes assembling and disassembling difficult for maintenance work. This paper proposes a novel electromagnet biased integrated radial-axial magnetic bearing without axial disk. This integrated magnetic bearing uses two axial coils to provide the bias flux to the radial and axial air gaps of the combined bearing. The axial magnetic bearing unit in this combined magnetic bearing utilizes reluctance forces developed in the non-uniform air gaps such that the axial disk can be removed from the bearing unit. The 4-pole homopolar type radial magnetic bearing unit is also designed and analyzed. Three dimensional finite element model for the bearing is also developed and analyzed to illustrate the diskless combined magnetic bearing.

• 한국항행학회논문지
• /
• 제27권3호
• /
• pp.274-280
• /
• 2023

Fix-to-Fix 항법은 항공기 조종사가 항행 중 현재 지점에서 원하는 특정 지점으로 이동할 때 예상 Heading을 구하기 위해 사용하는 방법이다. 하지만 이 항법은 경험에 의한 주먹구구식 방법에 기반을 두고 있기 때문에 대략적인 방향만 알 수 있을 뿐 정확한 값을 알 수는 없다. 게다가 원하는 지점에 가까워져 Radial차가 작아져 HSI상의 Bearing Pointer와 Course Indicator가 인접하게 되면, 이 방법조차 사용하기 까다로워 예상 Heading은 더욱 구하기 어렵게 된다. 이러한 한계를 해결하기 위해 삼각함수의 극한을 Fix-to-Fix 항법에 도입하였다. 본 논문에서는 Fix-to-Fix 항법을 할 때 이러한 한계를 보완할 수 있는, 삼각함수의 극한을 활용한 두 가지 방법을 제시하고 그 오차를 분석하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.423-426
• /
• 2007

Pohang Wind Energy Research Center (PoWER-C) is developing a 3 MW Radial Flux Permanent Magnet (RFPM) Synchronous Generator for offshore Wind Energy Converter (WEC). The rotor rpm is 15.7 and the gear ratio is set to be 92.93. The nominal generator rpm at the rated load is about 1459. To reduce the switching loss in the power electronics, the maximum frequency is limited to 100 Hz. This requirement limits the number of pole to six or eight. Permanent magnet excitation is assumed for higher energy yield and higher efficiency. In this report, the requirements and the first efforts for the physics design are described.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.620-625
• /
• 2007

According to 'Metropolitan Traffic Network Plan' announced in 2001, radial railways which connect Seoul with satellite cities around Seoul appear gradually. And followed by this, social demand for circular metropolitan railways that can connect the radial railways horizontally is increasing. But existing plans about circular metropolitan railways has limits to propose only passing cities of the railways. If there is no detailed guideline for circular metropolitan railways, the each railway for circular line will be constructed individually and then it will be not effective circular railways totally. Additionally that railway project will be easily interrupted by popular complaints. Therefore "The basic plan for circular metropolitan railways" is needful to guide a right direction for circular metropolitan railways. In this paper, rough track diagram of 'node' station for circular metropolitan railways is proposed. It is essential part of the basic plan. If the track diagram of a node is publicized in advance and individually lines of circular metropolitan railways is enforced to followed it, all lines will has rich circular functionality. Finally, effective circular metropolitan railways can be built.

• Journal of applied mathematics & informatics
• /
• 제29권1_2호
• /
• pp.451-457
• /
• 2011

The function f(z) = $e^{p(z)}$ where p(z) is a polynomial of degree n has 2n Julia lines. Julia lines of $e^{p(z)}$ divide the complex plane into 2n equal sectors with the same vertex at the origin. In each sector, $e^{p(z)}$ has radial limits of 0 or innity. Main results of the paper are concerned with maximum curves of $e^{p(z)}$. We deal with some properties of maximum curves of $e^{p(z)}$ and we give some examples of the maximum curves of functions of the form $e^{p(z)}$.

• 한국세라믹학회지
• /
• 제23권5호
• /
• pp.47-54
• /
• 1986

The structures of crystalline vitreous and liquid $SiO_2$ were Monte carlo simulated employing the potential energy function comprising Lennard-Jones 2-body and Axilrod-Teller 3-body potentials. Although the Si-O-Si angular distribution functions obtained in the simulation appear to be higher than the experimental results the other simulation results including SiO, O-O and Si-Si radial distribution functions and O-Si-O anglular distribution functions agree well with experimental data within acceptable limits. Themost important outcome in this study is that various $SiO_2$forms were successfully reproduced with the same potential energy function.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.286-287
• /
• 2015

Currently, Studies on improving the reliability of power supply is becoming an important issue because of the increase in demand of the electric power system. Therefore necessity of automation in distribution system is increasing day by day. However, a measured voltage data from FRTU of distribution automation system is incorrect because of installation space limits. Therefore there is a need of system analysis method by considering the characteristics of the distribution system. For a distribution system, applying the power flow method of transmission system has some problems, as distribution is radial system and it has unbalanced load. Therefore power flow by considering the characteristics of the distribution system have been studied. Existing power flow analysis of the distribution system has different methods like direct analysis method, backward/forward sweep method, modified method of newton raphson etc. In this paper, an improved power flow analysis method based on backward/forward sweep method is proposed in order to efficiently operate the distribution automation system. The proposed method of power flow has been verified through the result of case study.

• 한국안전학회지
• /
• 제11권4호
• /
• pp.3-9
• /
• 1996

In this study, comparison of theoretical solutions with experimental results is examined through fracture conditions for the case of float glasses subjected static loading. The range of fracture generation limits and critical penetration energies are solved according to the impactor mass under the high velocity, and analytical method of fracture strength and penetration strength are presented. Also, fracture patterns are investigated according to impact velocities. The results obtained from this study are as follows ; 1) Radial cracks are generated from the loading point regardless of plate thickness in the case of the plate subjected to the static loading. In the case of high-speed impact, dimensions of ring cracks become to smaller and length of radial cracks becomes shorter with the rapidity of impact velocity. 2) Kinetic change volume of collision after/before is constant regardless of velocities over the range of critical penetration velocity. 3) Although the same impact energy is working, the critical penetration energy is increased with the shorter of impactor mass. 4) Although the same impact energy is working, the penetration fracture of lighter Impactor mass is generated more than that of heavier impactor mass, and the impulse of lighter impacter mass appear more than that of heavier impactor mass. Therefore, the penetration fracture in the case of greater impulse is generated earlier regardless of the of the dimensions of Impact loading.

• Bulletin of the Korean Chemical Society
• /
• 제24권6호
• /
• pp.703-711
• /
• 2003

We have theoretically studied the nonadiabatic transitions among the five lower states with the Ω=$1_u$ symmetry ($1_u^{(1)} to 1_u^{(5)}$) in the photodissociation of Cl₂, Br₂, and I₂by using the spin-orbit configuration interaction (SOCI) method and the semiclassical time-dependent coupled Schrodinger equations. From the configuration analyses of the SOCI wavefunctions, we found that the nonadiabatic transition between $1_u^{(2)}$ and $1_u^{(1)}$ is a noncrossing type, while that between $1_u^{(3)}$ and $1_u^{(4)}$ is a crossing type for all the molecules. The behavior of the radial derivative coupling element between $1_u^{(1)}$ and $1_u^{(2)}$ and that between $1_u^{(3)}$ and $1_u^{(4)}$ is analyzed in detail. In Cl₂, nonadiabatic transitions can take place even between the states correlating to different dissociation limits, while in Br₂ and I₂, with the usual photon energies e.g. less than 20 eV, nonadiabatic transitions occur only between the states correlating to the same dissociation limits, reflecting the different magnitudes of the spin-orbit interactions.