• 대한수의학회지
• /
• 제51권4호
• /
• pp.297-301
• /
• 2011

The racehorses that under arthroscopic surgery due to be injured his limbs were studied during exercise or training at Busan Race Park from 2005 to 2010. Rate of arthroscopic surgical treatments was 1.4% (63/4,642). Affected bones were radius, radial carpal bone, third carpal bone, proximal phalanx, third metacarpal bone, femur, tibia, proximal sesamoid bone and intermediate carpal bone. The lesions were fracture, chip fracture, slap fracture, osteochonrosis, and osteochondrotitis dissencans. Number of patients under arthroscopic surgery were 63. Success horses of returned to racetrack or tried to return to racetrack were 58, and 5 horses were in training or resting at the time of publication. Success horses of returned to their previous use in the patients were 49 horses (84.4%) and no returned to the racetrack were 9 horses (15.6%) in 58 horses.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.345-351
• /
• 1998

Thermal shock resistance of $Al_2O_3$- and Fe-$Al_2TiO_5$-based Castable Refractories was studied using a central heating technique. Ring type specimens, 10mm thick and 20 and 100mm inner and outer diameters, respectively, were rapidly heated on the internal surface of the centre hole using a high power electrical heating element. The temperature field was measured experimentally and modelled using finite element analysis (FEA). The thermal stress field was also modelled using FEA. A radial notch was introduced to the ring specimens to enable calculation of the thermal stress intensity factors (SIF). A special LVDT device was incorporated in the thermal shock tester to monitor crack mouth opening displacement (COD). The thermal shock fracture initiation and crack propagation behaviour of the castable refractories were ascertained using the COD measurements and the fracture mechanics analysis data.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1250-1258
• /
• 2021

In this paper, the mechanical performance of cracked surface-coated Zircaloy cladding, which has different coating materials, coating thicknesses and initial crack lengths, has been investigated. By analyzing the stress field near the crack tip, the safety zone range of initial crack length has been decided. In order to determine whether the crack can propagate along the radial (r) or axial (z) directions, the energy release rate has been calculated. By comparing the energy release rate with fracture toughness of materials, we can divide the initial crack lengths into three zones: safety zone, discussion zone and danger zone. The results show that Cr is suitable coating material for the cladding with a thin coating while Fe-Cr-Al have a better fracture mechanical performance in the cladding with thick coating. The Si-coated and SiC-coated claddings are suitable for reactors with low power fuel elements. Conclusions in this paper can provide reference and guidance for the cladding design of nuclear fuel elements.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2008년도 제16차 학술대회
• /
• pp.175-175
• /
• 2008

We report a rare case of late-onset brachial artery occlusion caused by subclavian artery stenosis with excessive scar tissue after open reduction and plate fixation for clavicular fracture. When he referred to us, the right hand were pale and the radial and ulnar pulses at the wrist were absent. CT-angiogram showed compression of subclavian artery by excessive scar tissue beneath the fracture site and angiography revealed stenosis of subclavian artery with thrombus and complete obstruction of blood flow in the brachial artery with emboli. Therefore, we performed embolectomy. 2 years after operation, patient was essentially asymptomatic except mild pain after long standing elevation of arm. We recommend that minimal soft tissue dissection should be needed in the operative treatment of clavicular fracture, especially soft tissue beneath the clavicle should be protected maximally.

• Clinical Pain
• /
• 제19권2호
• /
• pp.129-132
• /
• 2020

Fracture is uncommon cause of lymphedema. The mechanism of lymphedema progression is still unknown, but disruption of the lymphatic system during and after fracture might be involved. In contrast, breast cancer surgery is a common cause of lymphedema and is usually caused by the removal of axillary lymph nodes. Sentinel node biopsy (SNB) has been adopted in early breast cancer to reduce the risk of lymphedema. Thus, the incidence of lymphedema in SNB was lowered. However, less than 10% of SNB patients are still diagnosed with lymphedema, but it is known that it took years to diagnose. Recently, we encountered atypical lymphedema occurred after breast cancer surgery with SNB. Symptoms started earlier than usual and were more severe. Interestingly, she has a history of a proximal radial fracture on the same side of SNB. We thought there could be a relationship between the acceleration of breast cancer-related lymphedema and fracture.

• Composites Research
• /
• 제23권2호
• /
• pp.1-9
• /
• 2010

본 연구는 실린더 내부가 경사가능재료로 코팅된 두꺼운 벽을 가진 실린더의 겉보기 파괴인성치를 해석한 것이다. 실린더는 내부로부터 반경방향의 단일 모서리 균열이 내재되어 있으며, 균열면과 내면에는 내압을 받고 있는 것으로 가정하였다. 소결온도로부터 냉각 결과 균일한 열팽창계수로 인해 실린더에는 비적합 고유스트레인이 생성되었다. 기존의 연구에서 소개된 응력확대계수 평가법에 기초해 겉보기 파괴인성치를 계산하였다. 본 연구에서는 TiC/$Al_{2}O_{3}$ FGM 코팅된 실린더를 사용하였고 겉보기 파괴인성치의 수치적인 결과를 도식화하였다. 재료분포프로파일, 실린더 벽 두께, 적용온도와 코팅두께등이 겉보기 파괴인치에 미치는 영향이 상세히 조사되었으며, 이러한 모든 인자는 실린더의 겉보기 파괴인성치를 조절하는데 중요한 역할을 하는 것으로 밝혀졌다.

• Clinics in Shoulder and Elbow
• /
• 제10권2호
• /
• pp.199-203
• /
• 2007

목적: 구상돌기는 주관절의 안정성 및 기능에 매우 중요하기 때문에, 구상돌기 골절 시 정확한 골편의 평가 및 고정이 매우 중요하다. 구상돌기 골절에 대한 방사선학적 평가는 주로 주관절 측면 촬영에서 하게 되는데, 요골두와 겹치기 때문에 정확한 관찰이 어려울 수 있다. 이에 저자들은 구상돌기 골절의 평가를 위한 새로운 방사선 촬영 방법, coronoid view를 고안하여 소개하고자 한다. 대상 및 방법: coronoid view는 구상돌기 골절 중 특히 사선의 골절선을 갖는 전내측 골편을 평가하기 위하여 고안되었다. 환자를 촬영대에 대하여 직각이 되게 옆으로 앉힌 후, 환측 견관절을 45도 외전하고, 주관절을 90도 굴곡한 상태에서 촬영대 위에 팔을 놓는다. 필름은 주관절 밑에 놓고, 주관절의 직상방에서 주관절을 중심으로 방사선을 조사한다. 이 방법으로 구상돌기 골절선이 방사선과 평행이 될 수 있으며, 요골두가 겹치는 것을 피할 수 있다. 결론: coronoid view는 구상돌기 골절선이 방사선과 평행이 될 수 있으며, 요골두 음영을 피할 수 있기 때문에 구상돌기 골절의 정확한 평가에 도움이 될 것으로 판단된다. 특히 금속 나사 등의 내고정물 때문에 컴퓨터 단층촬영이 불가능한 관혈적 정복술 후 환자의 경과 관찰에 특히 유용할 것으로 판단된다.

• 대한정형외과학회지
• /
• 제56권5호
• /
• pp.427-432
• /
• 2021

원위 요척 관절의 전방 탈구 치료가 지연된 경우에는 수근부 통증과 전완의 회전 운동의 제한이 동반되어 결국 구제술이 필요한 퇴행성 관절염이 발생할 수 있다. 24세 남자가 요골 간부 골절 수술 후 통증과 회전 운동 제한으로 내원하였다. 금속판으로 고정된 요골의 간부에서 7도의 전방 각형성이 관찰되었으며 척골 두가 전방으로 탈구되어 회외전에서 결손부가 요골의 S자 절흔 전방 경계에 걸려 탈구가 지속되는 소견이 관찰되었다. 부정 유합된 요골의 교정의 절골술과 척골 두 골결손 근위부의 골을 원위 결손 부위로 이동시키는 절골술을 시행하여 원위 요척 관절이 전완의 회전에 안정적으로 정복이 유지되도록 하였다. 수술 후 19개월에 전완 회전 운동 범위와 통증이 개선된 것을 확인하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제20권2호
• /
• pp.61-72
• /
• 1992

This study was carried out to investigate the fracture behavior and the fracture criterion of yellow lauan(Shorea spp.), when has used for furniture and wood structures, and to offer a reliability for wood structure and basic data for wood fracture criterion in experiments which are fracture tested under mode I, mode II and mixed mode loading condition. The results were summarized as follows; 1. Fractures in specimens which have inclined grain in yellow lauan procedeed from crack tip in the radial direction along the grain. 2. In yellow lauan, $K_{IC}RL$ was 42.1kg/$cm^{3/2}$ and $K_{IIC}RL$ was 15.8kg/$cm^{3/2}$. 3. The fracture criteria of lauan were; ($K_I/K_{IC}$)+($K_{II}/K_{IIC}$)=1 in RL system with inclined grain at $45^{\circ}$, ($K_I/K_{IC}$)+$(K_{II}/K_{IIC})^2$=1 with inclined grain at $15^{\circ}$ and $(K_I/K_{IC})^2$+$(K_{II}/K_{IIC})^2$=1 with inclined grain at $30^{\circ}$, $60^{\circ}$, $75^{\circ}$ and $90^{\circ}$, respectively. 4. The fracture criterion of wood could vary with the species, and the load applying condition. In order to measure the fracture criterion strictly, along with standardization of specimen geometry a large amount of experimental data is needed. 5. $K_{IC}$(critical stress intensity factor) can be predicted by grain angle. As the grain inclined angle increased, $K_{IC}$ and $K_{IIC}$ are increased.

• Clinics in Shoulder and Elbow
• /
• 제23권4호
• /
• pp.183-189
• /
• 2020

Background: The purpose of the current study was to investigate short- to mid-term outcomes and complications following radial head replacement (RHR) for complex radial head fractures and to identify factors associated with clinical outcomes. Methods: Twenty-four patients with complex radial head fractures were treated by RHR. The mean age of the patients was 49.8 years (range, 19-73 years). Clinical and radiographic outcomes were evaluated for a mean follow-up period of 58.9 months (range, 27-163 months) using the visual analog scale (VAS) score for pain, the Mayo elbow performance score (MEPS), the quick disabilities of the arm, shoulder and hand (Quick-DASH) score, and serial plain radiographs. Complications were also evaluated. Results: At the final follow-up, the mean VAS score, MEPS, and Quick-DASH score were 0.6±1.1, 88.7±11.5, and 19.4±7.8, respectively. The mean range of motion was 132.7° of flexion, 4.7° of extension, 76.2° of pronation, and 77.5° of supination. Periprosthetic lucency was observed in six patients (25%). Heterotopic ossification was observed in four patients (16.7%). Arthritic change of the elbow joint developed in seven patients (29.2%). Capitellar wear was found in five patients (20.8%). Arthritic change of the elbow joint was significantly correlated with MEPS (P=0.047). Four cases of complications (16.6%) were observed, including two cases of major complications (one stiffness with heterotopic ossification and progressive ulnar neuropathy and one stiffness) and two cases of minor complications (two transient ulnar neuropathy). Conclusions: RHR for the treatment of complex radial head fractures yielded satisfactory short- to mid-term clinical outcomes, though radiographic complications were relatively high.