• 대한화학회지
• /
• 제35권4호
• /
• pp.308-315
• /
• 1991

단순한 쿨롱액체들의 채심입방정계의 구조와 열역학적 성질들은 일성분 플라즈마에 대한 섭동론으로부터 계산된다. 섭동론(PT)과 Monte Cario(MC) 데이타의 비교는 좋은 일치를 보인다. 강체구 섭동론은 일성분 플라즈마 같은 먼 거리의 인력계에 적절하다. PT와 MC 데이타에 대한 동경 분포함수(g(r))와 구조인자(S(q))의 비교에서 일치를 보인다. 따라서 섭동론은 쿨롱액체의 성질 및 구조를 설명하는데 유용한 방법이다.

• 천문학회보
• /
• 제39권1호
• /
• pp.45.2-45.2
• /
• 2014

We carry out the first survey for globular clusters (GCs) of three galaxies in cosmic voids using Hubble Space Telescope (HST) Advanced Camera for Survey archival F606W and F814W images. While all sample galaxies are classified as early-type galaxies based on ground-based imaging, the high resolution HST images reveal that they are actually spiral galaxies. We identify the point sources with red colors typical for GCs as GC candidates in the color-magnitude diagrams. As a result, we find a significant number of GC candidates. The spatial and radial distribution of GCs show central concentration on each galaxy region. Their mean colors are similar to that of the Milky Way and M31 GCs. The void GCs are somewhat bluer by, and than cluster and field GCs in early-type galaxies with similar luminosity to our samples, but the discrepancy is not significant. We also estimate the specific frequencies of GCs in these galaxies and the values are consistent with those in field and cluster galaxies with similar luminosity. From these results, we suggest that the formation process of void GCs is similar to that of GCs in other environments. The further implications will be discussed.

• Fibers and Polymers
• /
• 제4권3호
• /
• pp.135-144
• /
• 2003

Permeability of the preform is one of key factors in design of RTM (Resin Transfer Molding) mold, determination of processing conditions, and modeling of flow in the mold. According to previous studies, permeability measured in the unsaturated fiber mats are higher than that in the saturated fiber mats by about 20% because of the capillary pressure. In this study, permeabilities of several fiber preforms are measured for both saturated and unsaturated flows. A saturated experiment of radial flow has been adopted to measure the permeability of anisotropic fiber preforms with high fiber content, i.e., circular braided preforms. In this method, four pressure transducers are used to measure the pressure distribution. Permeabilities in different directions are determined and the experimental results show a good agreement with the theory. Since permeability is affected by the capillary effect, permeability should be measured in the unsaturated condition for the textile composites to be manufactured under lower pressure as in the Vacuum Assisted Resin Transfer Molding (VARTM).

• 전력전자학회논문지
• /
• 제21권1호
• /
• pp.1-9
• /
• 2016

In this study, two types of switched reluctance motors (SRMs) with segmental rotors are presented in detail. The first is a 6/5 segmental rotor type, whereas the second is a 12/8 segmental rotor type. Both motor types have the same stator, rotor, and winding configurations. The stator is constructed with special stator poles, namely, exclusively designed exciting and auxiliary poles. The rotor is constructed from a series of discrete segments, each of which is embedded into the nonmagnetic isolator. The windings are only wound on the exciting poles, and no winding is wound on the auxiliary poles. Given these configurations, short flux paths and high flux-linkage utilization rate are achieved in the proposed motors, which may reduce the magnetomotive force requirement and increase the electrical utilization of a machine. To verify the effectiveness of the proposed motors, their characteristics, such as magnetic flux distribution, flux-linkage, torque, radial force, and efficiency, are analyzed and compared with those of a conventional 12/8 SRM. Meanwhile, two prototypes, one for each proposed segmental rotor type, are also designed and manufactured. Finally, the validity of the proposed motors is further verified by test results.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권9호
• /
• pp.431-437
• /
• 2001

Since the eddy current problem usually depends on the geometry of the moving conductive sheet and the shape of the pole projection area, there is no general method to find out its analytical solution. The analysis of the eddy current in a rotating disk is performed in the case of time-invariant field to find its analytical solution. As a method to solve the eddy current problem, the concept of the Coulomb charge and image method are proposed with the consideration of the boundary condition. Firstly, the line charge is obtained from the volume charge generated in the rotating disk and Coulomb's law is applied. Secondly, the finite disk radius is considered by introducing an imaginary eddy current to satisfy the boundary condition that the radial component of the eddy current is zero at the edge of the relating disk. Thirdly, the braking torque is calculated by applying Lorentz force law. Finally, the computed braking torque is compared with the measured one As a result, it can be said that the proposed model presents fairly accurate results in a low angular velocity range although a large error is observed as the angular velocity of the disk increases.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.481-484
• /
• 1999

The undoped-InSe and Sn-doped InSe single crystals were grown by vertical Bridgman method and their properties were invesigated. These crystals were obtained by lowering the quartz ampoule for growth in the furnace and growth rate at optimum condition is 0.4mm/hr. The orientations and the crystallinites of these crystals were identified by X-ray diffraction(XRD), double crystal rocking curve(DCRC) and etch-pit density(EPD) measurements. From the Raman spectrum at room temperature, TO, LO modes together with their overtones and combinations were observed. Optical properties were investigated by photoluminescence at 12K and direct band gap of these crystals obtained from optical absorption spectrum. Compared with undoped-lnSe, electrical properties of Sn-doped InSe were increased and the electrical conductivity type were n-type. But electrical properties along growth direction of crystals and radial direction of wafer showed nearly uniform distribution.

• Bulletin of the Korean Chemical Society
• /
• 제26권8호
• /
• pp.1203-1208
• /
• 2005

A computational study based on molecular dynamics (MD) simulations was performed in order to explain the difference in aqueous solubilities of two flavonoid/$\beta$-cyclodextrin ($\beta$-CD) complexes, hesperetin/$\beta$-CD and naringenin/$\beta$-CD. The aqueous solubility of each flavonoid/$\beta$-CD complex could be characterized by complexwater interaction not by flavonoid-CD interaction. The radial distribution of water around each inclusion complex elucidated the difference of an experimentally observed solubility of each flavonoid/$\beta$-CD complex. The analyzed results suggested that a bulky hydrophobic moiety (-$OCH_3$) of B-ring of hesperetin nearby primary rim of $\beta$-CD was responsible for lower aqueous solubility of the hesperetin/$\beta$-CD complex.

• 대한기계학회논문집B
• /
• 제35권10호
• /
• pp.1005-1012
• /
• 2011

본 연구의 목적은 원형과 타원형 노즐에 발생되는 캐비테이션 유동에 대해 수치 계산을 통해 각각의 특성을 파악하는 것이다. 수치해석을 위해 상용코드인 FLUENT 6.2 을 사용하였고, 실험결과의 캐비테이션 형태와 수치계산에서 얻은 결과를 비교함으로써 계산결과의 타당성을 확인하였다. 주목할만한 결과로는 원형 노즐 내부의 캐이테이션 형상은 노즐 축방향으로 대칭적인 원통형을 가지는 반면, 타원형 노즐의 경우 장축의 캐이테이션 길이가 단축의 캐이테이션 길이보다 긴 말발굽 (horseshoe) 형태가 관찰되었다. 또한, 타원형 노즐의 경우 오리피스의 반경방향 속도는 오리피스의 장, 단축에서 확연히 다른 분포가 관찰되었다.

• 설비공학논문집
• /
• 제1권3호
• /
• pp.244-251
• /
• 1989

A numerical study has been performed on the natural convection heat transfer from a conducting tube with two axial fins to a surrounding cylinder. As increasing dimensionless fin length ($L_F$), the center of flow moves to the bottom of annulus and the recirculating flow rate is decreased. The maximum local Nusselt number of conducting tube appears at ${\theta}=180^{\circ}$ for $L_F=0.0$, but at ${\theta}=130^{\circ}$ for $L_F{\geq}0.3$ and that of outer cylinder appears at ${\theta}=13^{\circ}$ for $L_F{\leq}0.6$ but at ${\theta}=33^{\circ}$ for $L_F=1.0$. The fin temperature is decreased by increasing radial distance and the temperature distribution of the downward fin is generally less than that of the upward fin. By increasing fin length, the local Nusselt number of the upward fin appears negative values for $L_F=1.0$, but appears positive values for $L_F<0.8$, and that of the downward fin appears positive values.

• 한국자기학회지
• /
• 제24권3호
• /
• pp.90-96
• /
• 2014

요골동맥의 움직임에 따라 손목의 "관" 위치에 놓인 영구자석이 요동함으로 자기장의 변화를 생성하였다. 맥동에 의존하는 자기장을 감지하는 홀소자가 구비된 집게형맥진기의 출력신호인 맥진파형 특성을 분석하였다. 유한요소법으로 전산모사한 자기장 파형과 실제 맥진 파형의 시간 특징점들은 거의 일치하였다. 한 개의 원통 소형 영구자석의 자기장 분포의 변화를 감지하는 홀소자 집게형맥진기 시뮬레이터를 제작하여 재현성과 유효성 있는 한방진단기기로 활용하는 기틀을 마련하였다.