• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.137-142
• /
• 2001

Since recent production system becomes that of the small quantity, large volume with high quality production, accurate and high speed inspection system is required. In such situation, noncontact 3D measurement system which utilized CCD cameras is useful technique in terms of system cost, speed of data acquisition, measuring accuracy and application. However, it has low accuracy compared with contact 3D measurement system because of the camera distortion, non uniformity of laser distribution and so on. For those reasons, in this paper precision enhancement method is studied considering radial camera distortion, and laser distribution. A distortion correction method is applied even to the standard lens. The laser slit beam trajectory is determined by 3 method: based of the Gaussian function signal approximation, the median method, the center of gravity method and the peak point of the Gaussian function method.

• Journal of ILASS-Korea
• /
• v.5 no.1
• /
• pp.30-40
• /
• 2000

The characteristics of liquefied butane spray are expected to be different from conventional diesel fuel spray, because a kind of flash boiling spray is expected when the back pressure is below the saturated vapor pressure of the butane(0.23MPa at 298K). The ambient pressure was held at a pressure above(0.37MPa) and below(0.15MPa) the fuel vapor pressure. The axial velocities, radial velocities, and size distributions in butane sprays were measured with PDPA(Phase Doppler Particle Analyzer) system. The PDPA measurement showed a smaller SMD at the 0.15MPa chamber pressure, compared to the 0.37MPa case. Log-hyperbolic density function for the droplets size distribution can be fitted to the experimental results of a liquefied butane spray.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.516-517
• /
• 2008

최근 전 세계적인 에너지위기에 따라 분산전원의 투입에 대한 관심이 갈수록 높아지고 있다. 하지만 분산전원의 계통투입은 필연적으로 소비자와 설비 측의 전압레벨과 전력조류흐름을 변화시킨다. 분산전원의 투입위치에 따라서 소비자와 설비 측의 전압은 크게 향상될 수 있으나 제한된 분산전원을 최적으로 배치하는 연구가 선행되어야 한다. 본 논문에서는 계통에 분산전원 투입할 시의 전압특성변화를 분석하고, 이를 토대로 계통의 전압품질향상을 목적으로 분산전원을 최적으로 투입하기 위한 알고리즘을 제안하였다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.2
• /
• pp.221-227
• /
• 2009

The study of the solidification process of welded metal is carried out using the finite element method, which is the basic study for optimal design. In the analysis of temperature, the welded zone is cooled as the result of heat conduction to the base metal and heat transfer to the circumference. In the early phase of the temperature in base metal zone is little changed. But after the rise in temperature the whole area is cooled gradually and uniformly with the lapse of 10 seconds, and a temperature change is hardly occurred in the radial direction but in the axial direction.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.199-204
• /
• 2003

In the present study, the compression process in scroll compressor was simulated in consideration of flow leakage and heat transfer. Tangential and radial leakages of the refrigerant between the scrolls were considered as nozzle flow. The experiment was first conducted with a scroll compressor for automobile air conditioning system and R134a as a refrigerant. Temperature and pressure were measured at the suction and discharge ports of the compressor to determine the thermodynamic states of the refrigerant flow. Temperature distribution of the scroll with the involute angle was also measured by thermocouples that were installed inside the scroll. Measured temperature distribution was compared with the numerical results. From this result, the thermal effect of mechanical contact was found to be important in heat transfer of the compression process.

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.115-123
• /
• 2003

Simultaneous measurements of velocity and OH distribution were made using particle image velocimetry(PIV) and planar laser-induced fluorescence(PLIF) of OH radical in turbulent hydrogen nonpremixed flames with coaxial air. The OH radical was used as an approximate indicator of chemical reaction zone. The OH layer was correlated well with the stoichiometric velocity, $U_s$, instantaneously and on average. In addition, high strain-rate regions almost coincide with the OH distribution. The residence time in flame surface, calculated from the root-mean-square value of the radial velocity, is proportional to $(x/d_F)^{0.7}$. It is found that the mean value of principal strain rate on the OH layer can be scaled with $(x/d_F)^{-0.7}$ and therefore, the product of the residence time and the mean strain rate remains constant over all axial positions.

• 전기의세계
• /
• v.26 no.2
• /
• pp.104-110
• /
• 1977

This paper investigates temperature distribution of plasma jets which used argon gas, and nitrogen gas mixed with argon as working fluids in spectroscopic method, and studies correlations between them main results are as follows; 1) The temperature at the center of plasma jet increases with are current and gas flow, and decreases with magnetic flux density along the axial direction. 2) The changing rate of temperature of plasma jet in the radial direction decreases rapidly beyond 2mm from central axis. 3) Temperature drop rate of plasma jet in the central axis direction appears most apparant beyond 13mm above the nozzle exit. 4) When argon gas mixed with a small amount of nitrogen, plasma temperature increases at same are current compared with the case of argon gas only.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.6
• /
• pp.9-15
• /
• 2012

As a propellant of a high speed underwater vehicle, the hydro-reactive solid metal particles using seawater as a oxidizer maximizes its specific impulse when the solid metal particles and the seawater are uniformly mixed in the combustion chamber. The purpose of this study is to investigate the effects of injector geometry on the particle distribution of similarity point of view. For the purpose of this similarity of the mean velocity and particle number density along the radial direction was measured by Particle Image Velocimetry(PIV).

• The Korean Journal of Ecology
• /
• v.23 no.4
• /
• pp.331-337
• /
• 2000

Fourteen different taxa of dictyostelid cellular slime molds were recovered from the alpine and subalpine zone in Mt. Paektu. In subalpine zone, six species were recovered : Dictyostelium minutum, D. brefeldianum, D. crassicaule, D. capitatum, Polysphondylium solitarium and P. pallidum. One of these species which were isolated from the soils of Larix olgensis community exhibited several distinctive features which differed from the published species. This species was designated as a new species, Polysphondylium solitarium Kang et Chang, sp. nov. When cultivated at 22~24$^{\circ}C$ on low-nutrient agar media with Escherichia coli, Polysphondylium solitarium is distinguishable from other species by the following combination of features: (ⅰ) the sorocarps with vinaceous pigmentation; (ⅱ) pseudoplasmodia radial. usually centralized and rarely subdivided; (ⅲ) the various number of whorls; (ⅳ) the spores with unconsolidated and nonconspicuous polar granules. Also, we confirmed this new species by analyzing ribosomal DNA (ITS1, ITS2 and 5.8s DNA) sequences of P. solitarium and P. violaceum.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.194-196
• /
• 1999

This paper verifies that DSPSRM having the rotor pole of "ㅓ" shape has a radial and axial flux distribution, and analyzes the flux density distribution of each direction using 3D FEM.