• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.233-236
• /
• 2002

The high-pressurized spray nozzle is used f3r special washing and cutting with strong impact force. The performance of this nozzle, which focused on spray penetration and radial dispersion, was mainly investigated to maximize the momentum and minimize the flow loss. Hence, our experimental research was conducted by changing the aspect ratio ranging from 0 to 3 with nozzle outlet of 1.1. The spray trajectory far high-pressurized water was experimentally investigated using PDPA diagnostics, which was available at spray downstream region. As the spray at upstream near the nozzle exit did not show the improved disintegration. The results showed empirical correlation with regard to non-dimensional axial velocity distribution, spray penetration, and radial spreading rate with photographic visualization.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.628-633
• /
• 2001

This paper presents analysis of the flows through three different types of radial compressor by using quasi-three-dimensional analysis method. The method obtains two-dimensional solution for velocity distribution on meridional plane, and then calculates approximately the static pressure distributions on blade surfaces. Finite difference method is used for the solutions of governing equations. The compressors have low level compression-ratio and 12 straight radial blades with no sweepback. The results are compared with experimental data and the results of inviscid analysis with finite element method. It can be concluded that the agreement is good for the cases where viscous effects are not dominant.

• 천문학회보
• /
• 제35권1호
• /
• pp.56.2-56.2
• /
• 2010

M87, a cD galaxy in the Virgo cluster, has 3-10 times larger enclosed mass than the Milky Way at any given galactocentric radius. Thus the globular cluster (GC) system in M87 is expected to have undergone a more significant dynamical evolution than that of the Milky Way if it had started from the same initial mass function (MF) and radial distribution (RD) as the Milky Way. The evolution of MF and RD of the M87 GC system has been calculated using an advanced, realistic Fokker-Planck (FP) model that considers dynamical friction, disk/bulge shocks, and eccentric cluster orbits. We perform hundreds of FP calculations with different initial cluster conditions, and then search a wide parameter space for the best-fit initial GC MF and RD that evolves into the observed present-day GC MF and RD. We also find best-fit initial MFs and RDs for blue and red GC groups, separately.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2511-2519
• /
• 2009

In this paper, we introduce the methodological system design via feature selection using Principal Component Analysis and Particle Swarm Optimization algorithms. The overall methodological system design comes from three kinds of modules such as preprocessing module, feature extraction module, and recognition module. First, Histogram equalization enhance the quality of image by exploiting contrast effect based on the normalized function generated from histogram distribution values of 2D face image. Secondly, PCA extracts feature vectors to be used for face recognition by using eigenvalues and eigenvectors obtained from covariance matrix. Finally the feature selection for face recognition among the entire feature vectors is considered by means of the Particle Swarm Optimization. The optimized Polynomial-based Radial Basis Function Neural Networks are used to evaluate the face recognition performance. This study shows that the proposed methodological system design is effective to the analysis of preferred face recognition.

• 전기학회논문지
• /
• 제57권9호
• /
• pp.1522-1530
• /
• 2008

This paper presents a discrete wavelet analysis based algorithm to address the fault impedance calculation under transient state in radial power distribution networks. The fault impedances have been derived under different fault conditions. Furthermore, a recursive fault distance estimation method is proposed utilizing the measured fault impedance and power line parameters. The proposed scheme can resolve the errors caused by the non-homogeneous power lines, the presence of lateral loads since, the fault impedance will always be updated with the recursive form. For the verification of the proposed scheme, a filed test has been peformed with varying fault resistances in the 22.9(kV) radial system. Power meters and fault locators were installed at the substation. It was figured out that the performance of the discrete wavelet and the recursive scheme are very good even for high fault resistance condition.

• Journal of Astronomy and Space Sciences
• /
• 제17권2호
• /
• pp.125-132
• /
• 2000

Long-slit spectra, covering the wavelength range 4050~5150$\AA$, have been used to investigate the radial behavior of absorption line features (G4300, Fe4383, Ca4455, Fe4531, Fe4668, and H$\beta$) along the major and minor axes of the bulge of M104. The heliocentric recession velocity of M104 has been derived as 1260$\pm$190${kms}^{-1}$. The strength of a number of metal absorption lines is decreasing with increasing radius, and the minor axis shows much steeper radial line gradients than the major axis. Line index of H$\beta$ has an opposite trend to other metal lines, i.e., increasing outward. The results in this paper imply that the properties of absorption line index distribution in M104 bulge have in many aspects similar trends to those of elliptical galaxies.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.11-15
• /
• 2002

This paper presents the thermal characteristic analysis of a high-speed HMC with spindle speed of 50,000rpm. The spindle is supported by two radial and axial magnetic bearings. and the built-in motor is located between the axial and rear radial magnetic bearings. The X-axis and Y-axis feeding systems are composed of linear motor and linear motion guides, and the Z-axis feeding system is composed of servo-motor, ballscrew and linear motion guide. The thermal analysis model of high-speed HMC is constructed by the finite element method, and the thermal characteristics in the design stage are estimated based on the temperature distribution and thermal deformation under the conditions related to the heat generation of built-in motor, magnetic bearings, linear motors, servo-motor, ballscrew, and so on.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.87-94
• /
• 1997

The circular plate resting on Boussinesq's half-space model under axisymmetric loading is studied by a finite element procedure to evaluate the distribution of contact pressure between plate and elastic half-space. The displacement of half-space due to axisymmetric surface loading can be evaluated by double integration of Boussinesq's solution. On that case the analytical integration can be executed for the radial direction but the analytical integration for the circumferential direction is impossible and the numerical integration should be considered. With the radial integration we can get non-dimensional function. Then the numerical integration for the formula is executed for the circumferential direction and the results are approximated 5th order Polynomials by using the least square method. With these 5th order approximate formula, the flexibility matrix of half-space is constructed as the coefficient matrix of nodal contact pressure by the finite element procedures. Iteration procedures are attempted by using this method to determine the separated region.

• 대한전기학회논문지
• /
• 제41권1호
• /
• pp.56-62
• /
• 1992

The GaAs bulk crystals are grown by the Synthesis Solute Diffusion(SSD) method and its properties are investigated. The crystal growth rate at optimum condition is 0.28 cm/day and their temperature dependence is R(T) = 2.92 x 10S04T exp(-1.548eV/kS1BTT) [cmS02T/day.K]. Etch pits density distribution along radial direction is order of 10S04TcmS0-2T and 10S03TcmS0-2T at the edge and middle of the wafers, respectively, and it increased exponentially along vertical direction of ingot. Moreover,it is uniformly distributed as order of 10S03TcmS0-2T in radial direction of In doped GaAs. The carrier concentration and mobilities are measured to 0.34-2.1 x 10S016T cmS0-3T and 2.3-3.3x10S03T cmS02T/V.sec, respectively.

• Geomechanics and Engineering
• /
• 제1권1호
• /
• pp.97-112
• /
• 2009

The interactions between a granular pile and raft placed on top are investigated using the continuum approach. The compatibility of vertical and radial displacements along the pile - soil interface and of the vertical displacements along the raft - top of ground interfaces are satisfied. Results show that consideration of radial displacement compatibility does not influence the settlement response of or sharing of the applied load between the granular pile and the raft. The percentage load carried by the granular pile (GP) increases with the increase of its stiffness and decreases with the increase of the relative size of raft. The normal stresses at the raft - soil interface decrease with the increase of stiffness of GP and/or relative length of GP. The influences of GP stiffness and relative length of GP are found to be more for relatively large size of raft. The percentage of load transferred to the base of GP increases with the increase of relative size of raft.