• 한국환경과학회지
• /
• 제27권10호
• /
• pp.831-844
• /
• 2018

Riverbank Filtration (RBF) is a kind of indirect artificial recharge method and is useful in obtaining higher-quality source water than surface water when procuring municipal water. This study evaluated optimal riverbank filtered water and the productivity of the radial collector wells on Ttansum Island in the area downstream of the Nakdong River, where Gimhae City is constructing a municipal water plant for the purpose of acquiring high-quality water. The RBF wells are planned to provide water to the citizens of Gimhae City through municipal water works. Groundwater flow modeling was performed with the following four scenarios: (a) 9 radial collector wells, (b) 10 radial collector wells, (c) 10 radial collector wells and two additional vertical wells, and (d) 12 radial collector wells. This study can be useful in determineing the optimum production rate of bank filtrated water not only in this study area but also in other places in Korea.

• 한국지구과학회지
• /
• 제41권4호
• /
• pp.381-390
• /
• 2020

When a radial collector well is installed and operated for agricultural purposes, negative impacts may be observed over time due to the clogging of horizontal arms, such as reduced groundwater discharge and water quality deterioration. When radial collector well No. 2 was rehabilitated using the high-pressure impulse generation technique, the specific capacity and transmissivity were increased by 43.1 and 100.6%, respectively. In contrast, according to air surging, the specific capacity and transmissivity increased by 33.8 and 85.8%, respectively, compared to the initial rate before rehabilitation. During the operation of radial collector wells since construction, the time of well rehabilitation can be effectively determined by continuously monitoring the groundwater level and pumping rate of the radial collector wells, thereby preventing a decrease in productivity.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권3호
• /
• pp.10-20
• /
• 2012

The pumping capacity of riverbank filtration using radial collector wells at the Geum, Yeongsan, Seomjin, and Nakdong rivers was evaluated using Milojevic's equation. Assessment of the radial collector wells' pumping capacity in riverbank filtration was carried out using a case study in which one set of collector wells is installed in the watershed of each river. Nakdong River was evaluated to have the highest pumping capacity for riverbank filtration. The areas capable of producing over 10,000 $m^3$ per day were found mostly in the Nakdong River.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권2호
• /
• pp.1-8
• /
• 2020

In general, the estimation of optimum yield for the radial collector well is determined by the empirical equation or numerical modeling, in which hydraulic conductivity of the aquifer is a main influence factor. Hydraulic conductivities of 164 soil samples collected from boreholes and horizontal wells (average length: about 50 m) installed during well construction in the Anseong stream were drawn in two-dimensional map by the Kriging method and utilized in this study. Hydraulic conductivity analyses by Representative Elementary Count (REC) indicated the average hydraulic conductivity is similar to that of the pumping test when the number of samples reaches about 1,000, which correspond to 1,000 ㎡. Pumping test was also conducted at 1 pumping well and 13 observation wells to estimate hydraulic conductivities at each observation well. REC analysis indicated that the average value of hydraulic conductivity calculated from at least four observation wells is valid as a representative value. The overall result suggested that multiple observation wells or multiple pumping-observation well systems that are located within the range of horizontal wells should be utilized to properly estimate the representative hydraulic conductivity values and the yield of a radial collector well.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.905-913
• /
• 2008

The water resource depending on mostly surface water has many problems, such as contaminated and unpredicted contamination event. For this reason, it has been employed highly technical treatment method for them, such as ground water dam and river bank filtration. it has been developed the radial collector wells in kind of bank filtration to increase efficiency for in-taking the water resource insead of the vertical well needed many wells to take more resource. But it has many problems with the incumbent method to bore the horizontal hole for radial collector wells, such as filling with the filter material outside of a strainer by watering, jamming as retrieving the casing tube with the filter material, eccentric boring etc. To reduce the problems of incumbent equipment, it has been developed the horizontal boring equipment and performed the field trial tests several times, which have bits and water jetting system with rotating the cone-shaped front to be excavated easily. In this paper, it was compared the brand-new with the incumbent non-rotating pressing insertion method. Also it was shown the problems of the incumbent method was reduced effectively.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권4호
• /
• pp.1-12
• /
• 2010

Well production by a riverbank filtration facility with multi-radial collector well systems in Jeungsan-ri, Changnyeong gun, Korea was evaluated. In this study, the drawdown at collector wells due to pumping and groundwater inflow rates along the horizontal arms of the collector wells were computed through numerical simulations. Sensitivities of the well production to hydraulic conductivity and well flow coefficient, which represents the resistance to the flow from the aquifer to the horizontal arms, were analyzed. Simulation results showed that, with given proposed pumping rate conditions, the drawdown in the caisson exceeded maximum drawdown constraints in the study site and the adjustment of the pumping rate at each well is needed. The drawdown is affected by the hydraulic conductivity of the main aquifer and the well flow coefficient, which means the profound field investigation of the study site is needed to accurately estimate the efficiency of riverbank filtration through radial collector wells.

• 지질공학
• /
• 제28권3호
• /
• pp.443-453
• /
• 2018

하천변에서의 대용량 강변여과수 개발은 방사형 집수정을 통하여 주로 이루어지는데, 초기 취수량의 산정을 위한 다양한 경험식이 개발되어 왔다. 안성천에 설치된 방사형 집수정을 대상으로 경험식을 활용한 초기 취수량을 추정한 결과, Babac, Kordas 및 Petrovic 방법은 실제 취수량 $6,124m^3/d$과 유사하나 Milojevic 방법은 상대적으로 차이가 큰 것으로 나타났다. 이는 각 방법별 적용 조건의 차이에 기인한 것으로 보인다. 각 방법의 입력 인자인 하천에서 집수정까지의 거리, 수평정의 개수, 대수층의 두께, 수평정의 길이, 수리전도도 등의 변화에 따른 추정식의 적용성을 분석한 결과, 각 방법별로 일정 조건하에서의 추정식 사용이 요구되며, 특히 수리전도도는 취수량 결정에 매우 중요하므로 정확한 산정이 필요함을 보여준다.

• 지질공학
• /
• 제28권4호
• /
• pp.583-592
• /
• 2018

최근들어 방사형 집수정 방식의 대용량 강변여과수 개발에 따른 배후지의 지하수위 강하에 대한 우려가 존재하고 있다. 본 연구에서는 안성천의 방사형 집수정을 대상으로 Modflow를 활용하여 수평정의 취수량에 따른 배후지의 수위 강하를 예측하였으며, 이 데이터를 기반으로 배후지 수위 강하가 최소가 되는 수평정별 취수량을 결정하는 다층퍼셉트론 기반의 인공신경망 모델을 개발하였다. 하천 방향으로 굴착된 수평정 HW-6의 취수량을 높이는 것이 OW-7 및 OB-11 관측정의 지하수위를 높게 유지하는데 필요한 것으로 평가되었다. 또한, 모델 입력 자료의 수 및 훈련과 검증 자료의 분류는 인공신경망 모델 결과에 영향을 미치므로 유의하여야 한다. 향후 현장의 실제 운영 자료와 수치모델의 비교를 통하여 인공신경망 모델을 보완한다면 배후지의 지하수 관리에 기여할 것으로 본다.

• 지질공학
• /
• 제26권3호
• /
• pp.331-337
• /
• 2016

농업용 방사상 집수정은 한국농어촌공사에서 1983년 경북 상주시 이안면에 지하댐 건설과 함께 최초로 설치하였으며, 지금까지 총 98개소의 농업용 방사상 집수정을 관리하고 있다. 이중 20개소는 농업용으로 건설된 5개의 지하댐 상류지역에 설치되었으며, 나머지 78개소는 지하댐 설치와 관계없이 설치되었다. 농업용 방사상 집수정은 대부분 1980년~1990년대 개발되었으며, 83개소는 설치한지 20년 이상 경과된 시설이다. 방사상 집수정의 집수 우물통은 일반적으로 내경 3.5 m, 심도 10 m 이내이며, 수평집수관은 65 mm 구경으로 30 m까지 천공한 후 PVC 집수관을 설치하였으며, 집수정 별로 9~28개 설치되어 있다. 집수정설치지점과 하천과의 이격 거리는 10~1,200 m이며, 최대양수량은 2,000~10,000 m³/day 이다. 방사상 집수정은 개발후 물리·화학적 원인에 의한 공막힘 현상 등으로, 취수량이 감소하여 효율이 저하되는 문제점이 있다. 본 연구에서는 30년이상 경과된 방사상 집수정의 수평집수관에 대하여 서징과 고압세척을 실시하고, 양수시험 및 TV검층을 실시하여 우물세척에 의한 수평집수관 폐색제거 효과를 분석하였다. 우물세척후 비양수량은 67% 증가하였으며, TV검층결과 집수우물통에서 가까울수록 수평집수관 스트레너의 막힘(Clogging) 정도가 심한 것을 확인하였다. 본 연구결과를 활용하여 방사상 집수정에 대한 모니터링과 우물 효율 개선방안을 수립하고, 주기적인 사후관리를 통해 방사상 집수정의 지속가능한 이용을 도모 할 수 있을 것으로 사료된다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권3호
• /
• pp.18-26
• /
• 2017

The increasing frequency of droughts has been increasing the necessity of utilizing subsurface dams as reliable groundwater resources in areas where it is difficult to supply adequate agricultural water using only surface water. In this study, we analyzed the current status and actual conditions of five agricultural subsurface dams as well as the effect of obtaining additional groundwater from subsurface dams operated as one aspect of the sustainable integrated water management system. Based on the construction methods and functions of each subsurface dam, the five subsurface dams are classified into three types such as those that derive water from rivers, those that prevent seawater intrusion, and those that link to a main irrigation canal. The classification is based on various conditions including topography, reservoir location, irrigation facilities, and river and alluvial deposit distributions. Agricultural groundwater upstream of subsurface dams is obtained from four to five radial collector wells. From the study, the total amount of groundwater recovered from the subsurface dam is turned out to be about 29~44% of the total irrigation water demand, which is higher than that of general agricultural groundwater of about 4.6%.