• 한국재료학회지
• /
• 제11권11호
• /
• pp.978-985
• /
• 2001

The amorphous alumina was obtained by flash calcination of Bayer gibbsite[$Al(OH)_3$aluminum trihydroxide]. Rehydration and pore characteristics of $r-A1_2O_3$ prepared from rehydrated amorphous alumina were investigated. Crystal phases of pseudo-boehmite and bayerite were changed when amorphous alumina was hydrated at various conditions such as time, the ratio of water/alumina and pH. Specific surface areas and pore volumes of $r- A1_{2O}_3$ were influenced by the reaction time, water/alumina and PH of rehydration. The total pore volume of $r-A1_{2O}_3$increases with increasing the reaction time and ratio of water/alumina. Especially, the pure pseudo-boehmite of single phase could be prepared, when amorphous alumina was hydrated in the range of pH 6.5-8.0 in water/alumina= 10 at $90^{\circ}C$ for 7hr. The $r-Al_{2O}_3$, obtained by calcination of the prepared pseudo-boehmite at $500^{\circ}C$ for 2hrs, is characterized by the specific surface area of $265m^2$/g, total pore volume of $0.75cm^3$/g.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.205-206
• /
• 2006

A ball-shape alumina arc-tube for low-wattage lamp was developed by the PIM process. An ultra high purity translucentgrade alumina powder was used. In injection molding process, a hot-runner type mold was developed. The translucent-grade alumina powder was extremely sensitive to contamination so that the injection molding condition and atmosphere control in the furnace should be taken care of with extreme caution. Contamination sources were pinpointed with EPMA. The arc-tube was molded in half and two halves were bonded in the middle by a new bonding technique at room temperature developed in this study.

• 대한치과보철학회지
• /
• 제54권4호
• /
• pp.354-363
• /
• 2016

목적: 본 연구는 지르코니아 도재 표면의 나노구조 알루미나 코팅이 지르코니아와 레진 시멘트와의 전단결합강도에 미치는 영향을 알아보고자 하였다. 재료 및 방법: 지르코니아 원판 80개를 표면처리방법(산화알루미늄 분사처리(A), 산화알루미늄 분사 후 Rocatec 처리(R), 연마 후 나노구조 알루미나 코팅(PC), 산화알루미늄 분사 후 나노구조 알루미나 코팅(AC))에 따라 4개의 군으로 나누었다. 알루미나 코팅은 질산 알루미늄을 가수분해시킨 용액에 침적 후 $900^{\circ}C$에서 열처리 하여 시행하였다. 지르코니아 표면 코팅은 주사전자 현미경을 이용하여 관찰하였다. 레진 블럭을 레진 시멘트를 이용하여 각 실험군의 지르코니아 표면에 합착하고 열순환처리 전, 후의 전단결합강도를 측정하였다. 결과: 알루미나 코팅을 한 지르코니아 표면은 균일하고 치밀한 나노구조 알루미나가 관찰되었다. PC, AC 군은 열순환처리 전과 후 모두 A와 R 군에 비해 현저하게 높은 전단결합 강도를 보였다. A, R 군은 열순환처리 후에 급격한 결합강도의 감소를 보였으나, PC와 AC군은 열순환처리에 의해 유의할만한 결합강도의 감소를 보이지 않았다. 결론: 지르코니아 표면에 나노구조 알루미나 코팅처리하는 것은 레진시멘트와의 결합강도를 증가시키는 방법이다.

• 한국전기전자재료학회논문지
• /
• 제29권10호
• /
• pp.613-619
• /
• 2016

The aim of this study is to improve of dielectric properties using epoxy/nano alumina composites with adding glycerol diglycidyl ether (GDE:1,2 g). This paper deals with the effects of dielectric properties(${\epsilon}^{\prime}_r$ and $tan{\delta}$) for epoxy/nano alumina contents (1,3 phr) and GDE addition (1,2 g)composites. 5 kinds specimen were prepared with containing epoxy resins, epoxy nano alumina composites. Average particle size of nano used were 30 nm. The nano alumina used were gamma phase particles of spherical shape. The suppression of epoxy chain motion by addition of nano alumina+GDE decreased dielectric loss and relative permittivity magnitude.

• 한국세라믹학회지
• /
• 제31권10호
• /
• pp.1099-1106
• /
• 1994

It is suggested that the microstructural toughening process in the initial rising portion of R-curves observed in polycrystalline alumina should be different from the grain bridging mechanism identified in the long crack regime. Microcracking in the advancing crack front seems to be a prerequisite for the development of unbroken bridging ligaments behind the crack tip. In order to test such a proposition, attempts were made to identify experimentally the presence of microcracks in the frontal zone of propagating cracks. In-situ observation is made of crack growth in a miniature double cantilever beam specimen of a average grain size of 10 ${\mu}{\textrm}{m}$ alumina. Presence of a few microcracks was identified in front of crack tip on the propagating crack plane. The R-curves were re-evaluated based on the observation.

• 마이크로전자및패키징학회지
• /
• 제24권2호
• /
• pp.11-15
• /
• 2017

실리콘 칩을 적층하는 3D 멀티 플립칩 패키지의 경우 방열문제가 대두됨에 따라 접착 접합부의 열전도도 향상이 요구되고 있다. 본 연구에서는 플립칩 본딩용 비전도성 접착제(NCP)에 있어서 알루미나 필러의 첨가가 NCP의 물성 및 열전도도에 미치는 영향을 조사하였다. 알루미나 필러는 미세피치 플립칩 접속을 위해 평균입도 400 nm의 미세분말을 사용하였다. 알루미나 필러 함량이 0~60 wt%까지 증가함에 따라 60 wt% 첨가 시 0.654 W/mK에 도달하였다. 이는 동일 첨가량 실리카의 0.501 W/mK보다는 높은 열전도도이지만, 동일 함량의 조대한 알루미나 분말을 첨가한 경우에 비해서는 낮은 열전도도로, 미세 플립칩 본딩을 위해 입도가 미세한 분말을 첨가하는 것은 열전도도에 있어서는 불리한 효과로 작용함을 알 수 있었다. NCP의 점도는 40 wt% 이상에서 급격히 증가하는 현상을 나타내었는데, 이는 미세 입도에 따른 필러 간 상호작용의 증가에 기인하는 것으로, 미세피치 플립칩 본딩을 위해 열전도도가 우수한 미세 알루미나 분말을 사용하기 위해서는 낮은 점도를 유지하면서 필러 첨가량을 증가시킬 수 있는 분산방안이 필요한 것으로 판단되었다.

• 한국세라믹학회지
• /
• 제31권12호
• /
• pp.1449-1458
• /
• 1994

A new analytical model which can discribe the relationship between the bridging stress and the crack opening displacement was proposed to investigate the microstructural effect on the R-curve behavior in a polycrystalline alumina. The crack opening displacement according to the distance behind the stationary crack tip was measured using in-situ fracture technique in an SEM, and then used for a fitting procedure to obtain the distribution of bridging stress. The current model and an empirical power law relation were introduced into the fitting procedure. The results indicated that the bridging stress function and R-curve computed by the current model were consistent with those computed by the power law relation. The microstructural factor, e.g., the distribution of grain size, was also found to be closely related to the bridging stress. Thus, this model explained well the interaction effect between the distribution of bridging stress and the local-fracture-controlling microstructure, providing important information for the systematic interpretation of microfracture mechanism including R-curve behavior of a monolithic alumina.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.365-366
• /
• 2002

The sliding wear behavior of ultra high molecular weight polyethylene (UHMWPE) was examined on a novel low temperature degradation-free zirconia/alumina composite material and conventional alumina and zirconia ceramics used for femoral head in total hip joint replacement. The wear of UHMWPE pins against these ceramic disks was evaluated by performing linear reciprocal sliding and repeat pass rotational sliding tests for one million cycles in bovine serum. The weight loss of polyethylene against the novel low temperature degradation-free zirconia/alumina composite disks was much less than those against conventional ceramics for all tests. The mean weight loss of the polyethylene pins was more io the linear reciprocal sliding test than in the repeal pass rotational sliding lest for all kinds of disk materials. Neither the coherent transfer film nor the surface damage was observed on the surface of the novel zirconia/alumina composite disks during the test. The observed r,'stilts indicated that the wear of the polyethylene was closely related to contacting materials and kinematic motions. In conclusion, the novel zirconia/alumina composite leads the least wear of polyethylene among the tested ceramics and demonstrates the potential as lhe alternative materials for femoral head in total hip joint replacement.

• The Korean Journal of Ceramics
• /
• 제2권3호
• /
• pp.142-146
• /
• 1996

The molten carbonate fuel cell matrices, which are usually made of high surface, fine particle size ${\gamma}-LiAlO_2$ are reinforced with coarse particles of the same material and alumina fibers. An the effects of reinforcing materials on pore characteristics, sintering properties and mechanical properties of the matrices are examined.Among the matrices examined, the highest mechanical reinforcement has been achieved in the one containing 10 wt.% coarse particles and 20 wt.% alumina fibers.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2002년도 추계학술대회 논문집
• /
• pp.263-264
• /
• 2002

연소시설에서 배연가스중의 NOx 배출을 저감하기 위하여 선택적 촉매 환원법(SCR)과 선택적 무촉매 환원법(SNCR)이 널리 이용되고 있다. 이러한 촉매처리는 Pt와 같은 귀금속이 포함된 촉매 하에서 암모니아를 환원제로 사용하였으나, R와 같은 귀금속의 경우 배연가스내에 함유된 중금속이나 비소(Arsenic), SOx, 비산재(fly ash)등에 의해 쉽게 비활성화(deactivation)되는 단점이 있다(Sumitra R et al., 1995). (중략)