• Bulletin of the Korean Chemical Society
• /
• 제18권2호
• /
• pp.185-189
• /
• 1997

The effect of pH and sodium dodecyl sulfate (SDS) micelle on the quenching of Ru(bpy)32+ luminescence by N-alkyl-4,4'-bipyridinium ions (RBPY+: R=methyl, octyl, dodecyl, benzyl) were investigated. In the absence of SDS, the quenching rate at pH 2 is similar to that of the corresponding methylalkyl viologens and much greater than that in pH 8 solution due to greater reducibility of the protonated form of RBPY+ (HRBPY2+). The quenching rate at pH 2 is strongly enhanced by the presence of SDS, while that at basic pH is greatly retarded. These observations are explained by deep embedment of RBPY+ into the hydrophobic hydrocarbon region of the micelle, whereas Ru(bpy)32+ and HRBPY2+ locate in the Stern layer of the micelle.

• 소성∙가공
• /
• 제26권2호
• /
• pp.101-107
• /
• 2017

Aluminum alloys are widely used in automotive industry because of their high strength-to-density ratio and excellent corrosion resistance. However, conventional cold stamping of aluminum alloys leads to low formability and excessive spring-back. To overcome these problems, Hot Forming Quenching (HFQ) is applied to manufacture automotive part using aluminum alloy. The purpose of this study is to investigate effect of forming temperature on spring-back in HFQ of T6 heat treated AA6061 sheet. In this study, hat shape forming test was adopted to evaluate spring-back characteristics according to various forming temperatures. In additions, the test was also performed with warm forming conditions in comparison with dimensional accuracy of HFQed part. The experimental results showed that dimensional accuracy of HFQed part was superior to warm formed part and amount of spring-back was decreased as forming temperature rise.

• 열처리공학회지
• /
• 제18권2호
• /
• pp.112-118
• /
• 2005

Study was focused on the effect of the cooling rate on the embrittlement behavior of Zircaloy-4 cladding simulated Loss Of Coolant Accident (LOCA) environment. Claddings were oxidized at given temperature and given time followed by various water quenching in the range of $0.6^{\circ}C$ and $100^{\circ}C$ per second. Cladding failed after water quenching above the threshold oxidation. Threshold oxidation was decreased as the cooling rate increased, which is due to the matensite structure formed during fast cooling rate.

• 한국재료학회지
• /
• 제25권12호
• /
• pp.666-671
• /
• 2015

In this study, we investigated the effect of the residual carbides and tempered carbides precipitated by tempering treatment after quenching on the pitting corrosion of mod. 440A martensitic stainless steel. In quenched specimens and tempered specimens after quenching of mod. 440A martensitic stainless steel, the volume fraction of the residual carbides and total carbides decreased with the increase of the austenitizing temperature. Pitting resistance increased with the increase of austenitizing temperature. With the increase of the volume fraction of the residual and total carbides, the pitting resistance of mod. 440A martensitic stainless steel was decreased. The pitting resistance of mod. 0.5C-17Cr-0.5Ni 440A martensitic stainless steel had stronger affected by residual carbides than precipitated carbides produced by tempering.

• 소성∙가공
• /
• 제19권1호
• /
• pp.25-31
• /
• 2010

To achieve desired microstructure and mechanical property of a manufacturing product, heat treatment process is applied as a secondary process after forging. Especially, quenching process is used for improving strength, hardness, and wear resistance since phase transformation occurs owing to rapid heat transfer from the surface of the specimen. In the present paper, a study on surface temperature measurement for water quenching of eutectoid steel was investigated. In order to determine the temperature history in experiments, three different measuring schemes were used by varying installation techniques of K-type thermocouples. Depending on the measured temperature distribution at the surface of the specimen, convective heat transfer coefficients were numerically determined as a function of temperature by the inverse finite element analysis considering the latent heat generation due to phase transformation. Based on the inversely determined convective heat transfer coefficient, temperature, phase, and hardness distributions in the specimen after water quenching were numerically predicted. By comparing the experimental and computational hardness distribution at three different locations in the specimen, the best temperature measuring scheme was determined. This work clearly demonstrates the effect of temperature measurement on the final mechanical property in terms of hardness distribution.

• 한국주조공학회지
• /
• 제35권4호
• /
• pp.88-98
• /
• 2015

The effects of quenching and tempering temperatures on the tensile, impact and corrosion properties of A487 alloy cast with different C contents of 0.16, 0.19 to 0.23 wt.% were examined. The impact tests were conducted at $25^{\circ}C$ and $-60^{\circ}C$ and the immersion test was performed using 3.5% NaCl solution for 14 days. The quenching temperature affected the mechanical properties of A487 alloy cast, while the magnitude of change varied depending on the C content. The increase in tempering temperature showed the typical trend of decreasing tensile strength and increasing impact properties. The change in quenching and tempering temperature in this study did not affect the corrosion properties of A487 alloy significantly. The change in mechanical and corrosion properties of A487 with different C contents was discussed based on the microstructural and fractographic observation.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제12권6호
• /
• pp.53-59
• /
• 2007

액체섬광계수기(liquid scintillation counter: LSC)를 이용한 지하수 $^{14}C$의 측정에서 휘발성유기화합물(volatile organic compounds: VOC)에 따라 소광효과(quenching effect)를 정확하게 보정할 수 있는 최적 소광곡선(quenching curve)의 작성조건을 조사하였다. 우선, VOC에 따른 소광효과를 알기 위하여 benzene, toluene, ethylbenzene, o-(m-,p-)xylenes, trichloroethylene(TCE)과 tetrachloroethylene(PCE), carbon tetrachloride, chloroform과 같은 주요 지하수오염유기물에 의한 소광인자(spectral quench parameter of the external standard, SQP(E))를 측정하였다. 소광곡선은 $^{14}C$ 표준용액과 chloroform 소광시약을 이용하여 작성하였으며 $^{14}C$ 표준용액의 비방사능(specific activity, dpm/mL), LSC 측정시간, 소광시약 농도 등의 최적조건을 도출하였다. 소광효과는 분자 내에 염소원자를 포함하지 않는 BTEX(benzene, toluene, ethylbenzene, o-(m-,p-)xylenes) 보다 염소원자를 포함하는 TCE, PCE, carbon tetrachloride와 chloroform에서 매우 높게 나타났다. 실험에서는 여건상 $^{14}C$ 비방사능이 7,000 dpm/mL 정도의 표준용액을 사용하였는데 이 경우 LSC측정시간은 100분, 소광시약으로 chloroform을 사용할 경우 수 mL의 첨가량이 적당하였다. 이러한 조건으로 BTEX(benzene, toluene, ethylbenzene, m-xylene)에 대해 작성한 소광곡선의 상관계수(coefficient of correlation)는 0.99이상으로 통계학적으로 신뢰할 수 있는 값을 얻을 수 있었으며 이 소광곡선을 지하수와 수돗물의 $^{14}C$ 측정에 적용한 결과 표준용액의 비방사능 값과 잘 일치하여 연구결과의 유효성을 확인할 수 있었다.

• Elastomers and Composites
• /
• 제36권3호
• /
• pp.177-187
• /
• 2001

폴리프로필렌(PP)/폴리우레탄(PU) 블렌드를 compositional quenching으로 제조하여 모폴로지, 인장물성, 표면에너지 그리고 열안정성 등을 조사하였다. 블렌드 제조시, 말레인산 무수물이 그라프트된 PP(MPP)와 히드록시에틸 말레이미드가 그라프트된 PP(HPP)를 반응성 상용화제로 도입하였으며, 이들의 생성 및 PU 조성과의 반응을 FT-IR로 확인하였다. Compositional quenching으로 제조한 블렌드는 용융블렌드에 비해 높은 혼화성을 보였으며, 블렌드내의 상용화제의 함량이 증가함에 따라 모폴로지, 인장물성. 표면특성, 그리고 열안정성 등의 물성이 현저하게 향상되었다. 상용화제로 MPP를 도입한 블렌드는 HPP를 도입한 블렌드에 비해, 높은 표면 에너지를 가졌다.

• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.69-76
• /
• 2018

본 연구에서는 유정용 강관의 열처리 조건 및 합금원소(B, Ti)에 따른 미세조직 및 기계적 성질을 조사하였다. 실험에는 J55, J55+B,Ti 강재를 사용하였고, 열처리 조건은 각각 오스테나이트 처리온도 ($880^{\circ}C$, $910^{\circ}C$, $940^{\circ}C$), 냉각방식 (수냉, 유냉), 템퍼링 온도 (미실시, $550^{\circ}C$, $650^{\circ}C$) 이다. 열처리 조건에 따라 얻어지는 미세조직을 예측하기 위해 J55, J55+B,Ti 강재의 화학적 성분을 기준으로 평형상태도와 CCT 곡선을 예측하였다. 시뮬레이션 결과 평형상태도는 A1, A3 온도가 약 $20^{\circ}C$ 감소하였고, CCT 곡선은 B, Ti이 첨가됨에 따라 ferrite와 bainite nose 부분이 오른쪽으로 이동하였다. J55, J55+B,Ti 강재의 CCT 곡선을 기준으로 냉각속도에 따른 martensite, bainite, ferrite등 예상되는 미세조직을 예측하였고, J55 강재의 미세조직 예측값은 실제 실험값과 유사한 양상을 나타내었지만. J55+B,Ti 강재의 예측값은 실제 실험값과는 차이가 있었다. 열처리 조건이 변화됨에 따라 martensite, bainite, ferrite 등 다양한 조직이 생성되었으며, 이는 경도, 강도 및 연신율에 밀접한 영향을 미쳤다. J55시편의 수냉의 경우 martensite 조직이 형성되었고, 유냉의 경우 bainite와 ferrite 조직이 형성되었지만, J55+B,Ti시편은 B의 첨가에 의한 경화능 향상으로 냉각방식에 관계없이 martensite 조직이 형성되었다. 전반적으로 B, Ti을 첨가하면서 기계적 성질은 향상되었고, quenching 이후의 시편보다 tempering 이후의 시편에서 크게 향상되었다. 이는 Ti의 첨가로 인해 생성된 미세한 석출물이 재결정시 결정립 성장을 억제하여 미세한 오스테나이트 결정립을 생성하였고, tempering 열처리 이후에도 결정립 미세화 효과가 큰 영향을 미친 것으로 판단된다.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.97-104
• /
• 2011

Modified C95600 bronze contains Fe component of 0.7 weight percentage besides Cu-7Al-2.5Si composition. The shape of centrifugal cast is a circular pipe with thick wall. Specimens machined from the centrifugal cast were quenched in oil after isothermal holding at a given heat treatment temperature in the range of $700{\sim}900^{\circ}C$. Mechanical properties and structural morphology are depended on the quenching heat treatment temperature regardless of isothermal holding time. Tensile strength or Brinell hardness is increased with increasing heat treatment temperature. The microstructure caused by quenching contains mixing phases of ${\alpha}+{\beta}'+FeSi+{\kappa}$ which martensite of ${\beta}'$ phase has been transformed from ${\beta}$ phase. Effect of isothermal holding temperature on mechanical properties in case of quenching heat treatment attributes to the change of volume fraction of ${\beta}'$ on the structural morphology. Mechanical characteristics of specimen, initially quenched from $850^{\circ}C$, and then tempered at $500^{\circ}C$, does not show an obvious softening indication, because disappearance of ${\beta}'$ during tempering process can be compensated by precipitation of brittle phase ${\gamma}$.