• Management & Information Systems Review
• /
• v.18
• /
• pp.201-222
• /
• 2006

As the competition between countries has become higher and the notion of software quality has been widely spread. it has been necessary to develop technologies that can ensure and produce high quality software. With the advent of information-oriented society. quality control has to transfer to the quality control activities focused on software system instead of those activities focused on hardware system. If so, how do we get to handle the quality control on the basis of the new approach. Also, as software applications have grown. so too has the importance of software quality. In order to manage software quality, the technology to specify and evaluate both the software product quality and development process quality objectively quantitatively is most important. To produce products of good quality, we need a more progressive quality control system according to the need of software development life cycle. In other words, we do software right the first time or build quality in the process. On the basis intermediate and final time or build quality in the process. On the basis of data achieved, we can evaluate the products according to the consequences of the data, What are the problems to contrive the software quality control system?, we con promote the quality of products. To achieved that goal, we con provide a suitable the technique and method of software quality control.

• Structural Engineering and Mechanics
• /
• v.12 no.5
• /
• pp.459-474
• /
• 2001

The complete moment-curvature curves of doubly reinforced concrete beams made of normal- or high-strength concrete have been evaluated using a newly developed analytical method that takes into account the stress-path dependence of the constitutive properties of the materials. From the moment-curvature curves and the strain distribution results obtained, the post-peak behavior and flexural ductility of doubly reinforced normal- and high-strength concrete beam sections are studied. It is found that the major factors affecting the flexural ductility of reinforced concrete beam sections are the tension steel ratio, compression steel ratio and concrete grade. Generally, the flexural ductility decreases as the amount of tension reinforcement increases, but increases as the amount of compression reinforcement increases. However, the effect of the concrete grade on flexural ductility is fairly complicated, as will be explained in the paper. Quantitative analysis of such effects has been carried out and a formula for direct evaluation of the flexural ductility of doubly reinforced concrete sections developed. The formula should be useful for the ductility design of doubly reinforced normal- and high-strength concrete beams.

• Nuclear Engineering and Technology
• /
• v.48 no.1
• /
• pp.144-152
• /
• 2016

Human capabilities, such as technical/nontechnical skills, have begun to be recognized as crucial factors for nuclear safety. One of the most common ways to improve human capabilities in general is training. The nuclear industry has constantly developed and used training as a tool to increase plant efficiency and safety. An integrated training framework was suggested for one of those efforts, especially during simulation training sessions of nuclear power plant operation teams. The developed training evaluation methods are based on measuring the levels of situation awareness of teams in terms of the level of shared confidence and consensus as well as the accuracy of team situation awareness. Verification of the developed methods was conducted by analyzing the training data of real nuclear power plant operation teams. The teams that achieved higher level of shared confidence showed better performance in solving problem situations when coupled with high consensus index values. The accuracy of nuclear power plant operation teams' situation awareness was approximately the same or showed a similar trend as that of senior reactor operators' situation awareness calculated by a situation awareness accuracy index (SAAI). Teams that had higher SAAI values performed better and faster than those that had lower SAAI values.

• KIEAE Journal
• /
• v.13 no.3
• /
• pp.21-26
• /
• 2013

Recently, as the concern over environmental problem has been serious all over the world, carbon has become a key issue to mitigate the problem. In the field of Architecture, various sustainable assessment systems and LCCO2 assessment strategies have been developed, guiding low carbon building while planning. However, assessment system for low carbon neighborhood, which can be more efficient strategy, is still in the stage of research. In this paper, as a research for low carbon assessment system and planning guideline for neighborhood, scope meeting domestic condition has been set and sustainable assessment system for neighborhood, which is similar to low carbon concept, have been compared. LEED-Neighborhood Development, BREEAM-Communities, CASBEE-Urban Development, and GBCC-Apartment Houses were used for comparison. As a result, it is found that those systems has many differences in judging system, aggregating method, scope of evaluation, and relations with a building assessment system. The concern about carbon is not insufficient yet. Finally, assessment system for low carbon neighborhood, which is not only for establishing the plan, but also for giving guideline at the very first state of the plan, should be developed as fast as passible. With the result of this paper, establishment of assessment criteria and the way to measure quantitative $CO_2$ should be studied forward.

• International Journal of Highway Engineering
• /
• v.15 no.5
• /
• pp.145-156
• /
• 2013

PURPOSES : This research is a study on the changes in the road network of the surrounding area is installed according to the Kiss & Ride Zone. METHODS : Estimating the transportation mode of students by using the Metropolitan household Surveys(2006) and estimating the O/D by Kiss & Ride ratio with the estimated data, then being applied to a method of reducing the number of lanes for certain sections of the road which would be installed with Kiss & Ride Zone. RESULTS : The reason why it is different for delay resolving time and the affected roads as the Kiss & Ride percentage change, was the impact of the Kiss & Ride Zone's installation position. CONCLUSIONS : The purpose of the study was to analyze the impact of the road network in accordance with the installation of Kiss & Ride Zone by using speed and queue delay resolving time, and it is a need to develop a quantitative evaluation technique which was using various indicators in impact analysis according to the installation of the traffic safety facilities in the future.

• Korean Journal of Pharmacognosy
• /
• v.44 no.3
• /
• pp.235-241
• /
• 2013

Aucklandia lappa Decne (Compositae) has been used for treatment of abdominal pain, vomiting, diarrhea, chronic inflammation, and antibacterial effect. The quality of these herbs has been affected by many factors such as collection time, place, temperature, cultivation environment and manufacturing process. We used costunolide and dehydrocostuslactone as marker compounds for quality evaluation of rhizome of Aucklandia lappa. 66 samples of Aucklandia lappa were collected from those habitats in Korea and China. The developed HPLC-DAD method was applied to investigate for quality control of Aucklandia lappa samples. The average contents of the costunolide and dehydrocostuslactone were 2.3895% and 0.9258%, respectively. The principal component analysis (PCA) exhibited that classification of Aucklandia lappa according to origin not separated. Results of this study may be satisfactory applied to determination of content criteria of Aucklandia lappa.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.10
• /
• pp.1111-1117
• /
• 2013

In this paper, the shape accuracy of the stamped hat-type product is quantified and analyzed with ultra high strength steel (UHSS) sheets. The shape of the hat-type product is designed in order to simplify the geometry of the side sill and the stamping methodology is proposed in order to verify the effect of the stamping procedure on the springback amount. Experiments and finite element analyses are conducted with four kinds of the forming sequences. The springback amounts are measured and compared according to the forming procedure with the embossing shape. Experimental result in company with analysis one illustrate that the springback amount is reduced with embossing in the padding operation. They also fully demonstrates the proposed forming procedure and the analysis method can be effectively applied to the process design for producing parts with ultra high strength steel.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.6
• /
• pp.563-575
• /
• 2007

This contribution contained the classical work of an open-hole tensile plate to demonstrate the performance of grating shearography and to compare with the results obtained by other full-field measurement techniques, The isotropic plate with an open-hole has often appeared in the previous contributions introducing novel full-field method and system. Grating shearography directly provided six quantitative measurands about the specimen's surface kinematics by using a single measurement set: three in-plane strains, in plane rotation, and two out-of-plane slopes. The quasi-plane wavefront of grating metrology led to high signal-to-noise ratio (SNR) and thus neither fitting nor filtering was applied, and the small shearing distance of $101{\mu}m$ could be used. The small shearing distance provided the outstanding spatial resolution of $80{\mu}m$ and sensitivity appropriate for experimental mechanics. Finally, the grating shearography enabled the visualization of the complex surface deformation around the hole and also detected parasitic flexions of the specimen in the micrometer regime during the tensile test.

• Journal of Surface Science and Engineering
• /
• v.54 no.5
• /
• pp.278-284
• /
• 2021

Corrosion of steel plate is common phenomenon which results in the gradual destruction caused by a wide variety of environments. Corrosion monitoring is the tracking of the degradation progress for a long period of time. Corrosion on steel plate appears as a discoloration and any irregularities on the surface. In this study, we developed a quantitative evaluation method of the rust formed on steel plate by using k-means clustering from the corroded area in a given image. The k-means clustering for automated corrosion detection was based on the GrabCut segmentation and Gaussian mixture model(GMM). Image color of the corroded surface at cut-edge area was analyzed quantitatively based on HSV(Hue, Saturation, Value) color space.

• Journal of Information Processing Systems
• /
• v.15 no.1
• /
• pp.181-188
• /
• 2019

A production system is a management system that supports all activities to perform production operations at the manufacturing site. From the point-of-view of a smart factory, smart manufacturing systems redesigned the concept of onsite production systems to fit the entire system and its necessary functional composition. In this study, we select the key functions needed to build a smart factory for a PCB line and propose a new six-step model for the deployment of a smart manufacturing system by integrating essential functions. The smart manufacturing system newly classified the production and operation tasks of PCB manufacturing and selected necessary functions through requirement analysis and benchmarking of advanced companies. The selected production operation tasks are mapped to the functions of the system and configured into seven modules, and the optimal deployment model is presented to allow flexible responses to the characteristics of the tasks. These methodologies are first presented in this study, and the proposed model was applied to the PCB line to confirm that they had significant changes in the work method, qualitative effects, and quantitative effects. Typically, lead time and WIP have reduced by about 50%.