• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.11
• /
• pp.2457-2465
• /
• 2002

Numerical modeling of a nondestructive testing system plays an important role in many aspects of quantitative nondestructive evaluation (QNDE). The ultimate goal of a model is to predict test results for a specific flaw in a material. Thus, in ultrasonic testing, a system model should include the transducer, its radiation pattern, the beam reflection and propagation, and scattering from defects. In this paper attention is focused on the scattering model and the scattered fields by defects are observed by an elastodynamic boundary element method. Flaw types addressed are void-like and crack-like flaws. When transverse ultrasonic waves are obliquely incident on the flaw, the angular distribution of far-field scattered displacements are calculated and presented in the form of A-scan mode. The component signals obtained from each scattering problem are identified and their differences are addressed. The numerical results are also compared with those obtained by high frequency approximate solutions.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.6
• /
• pp.504-511
• /
• 2008

This paper proposes an ultrasonic measurement method for measurement of linear interfacial stiffness of contacting surface between two steel plates subjected to nominal compression pressures. Interfacial stiffness was evaluated by using shear waves reflected at contact interface of two identical solid plates. Three consecutive reflection waves from solid-solid surface are captured by pulse-echo method to evaluate the state of contact interface. A non-dimensional parameter defined as the ratio of their peak-to-peak amplitudes are formulated and used to calculate the quantitative stiffness of interface. Mathematical model for 1-D wave propagation across interfaces is developed to formulate the reflection and transmission waves across the interface and to determine the interfacial stiffness. Two identical plates are fabricated and assembled to form contacting surface and to measure interfacial stiffness at different states of contact pressure by means of bolt fastening. It is found from experiment that the amplitude of interfacial stiffness is dependent on the pressure and successfully determined by employing pulse-echo ultrasonic method without measuring through-transmission waves.

• Proceedings of the Korean System Dynamics Society
• /
• 1999.08a
• /
• pp.105-132
• /
• 1999

If a system such as a port has a large boundary and complexity, and the system's substance is considered as a black box, forecast accuracy will be very low. Furthermore various components in a port exert significant influence on each other. To copy with these problem the form of structure models were introduced by using SD method. The Competitive Ports Model had several sub-systems consisting of each Unit Port models, and each Unit Port model was made by quantitative, qualitative factors and their feedback loops. The fact that all components of one port have influence on the components of the other ports should be taken into account to construct Competitive Port Models. However, with the current approach that is impossible, and in this paper, therefore, models were simplified by HFP adapted to integrate level variables of unit port models. Although many studies on modelling of port competitive situation have been conducted, both theoretical frame and methodology are still very weak. In this study, a new algorithm called ESD(Extensional System Dynamics) for the evaluation of port competition was presented, and applied to simulate port systems in northeast Asia.

• Journal of Korea Multimedia Society
• /
• v.14 no.11
• /
• pp.1365-1372
• /
• 2011

This paper proposes a cognitive contrast enhancement algorithm based on the non-linear masking to advance low cognitive contrast in dark regions of images. In order to improve brightness in dark regions of an image, we propose a new contrast enhancement algorithm based on the non-linear masking using regional adaptive parameters of an image. For performance evaluation of the proposed method, chromaticity and saturation comparison as a quantitative assessment and z-score comparison as a qualitative assessment were executed between test images and their simulated images by SSR, MSR, a conventional non-linear masking and the proposed method, respectively. As a result, the proposed method showed low chromaticity and saturation difference and improved cognitive contrast for the three methods.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.28 no.3
• /
• pp.63-90
• /
• 2002

Quantitative measurement of melanin is the best method to evaluate whitening effect of cosmetics on human skin. However, non-invasive method to quantify human skin melanin with high precision has not been established. Whitening effect of cosmetics on the skin results in lightening of skin color. Therefore, it is reasonable to measure skin color in a reproducible manner for the assessment of whitening effect. Several Instruments or methods, such as colorimeter, mexameter, and visual assessments by experts , have been used for this purpose. In this lecture I will review the details of various assessment methods for the evaluation of whitening effect and discuss the pros and cons of each method. Then I will present briefly the results of clinical trial. Finally I will introduce new non-invasive modalities to quantify melanocytes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.805-809
• /
• 2008

Measurement of leaf area index (LAI) is useful for understanding rice growth, water use, and canopy light interception. The top nitrogen content(TNC) per unit area is an important quantitative index of the condition of nitrogen nutrition in rice production. The rapid and simple method of estimation of TNC, with the use of the existing nondestructive analyzing instruments chlorophyll meter SPAD-502 and plant canopy analyzer (PCA) LAI-2000, was scrutinized. Destructive measurement is time consuming and labor intensive. Our objective was to evaluate sampling procedures using the Li-Cor LI-1800, LAI 2000 plant canopy analyzer (PCA) for nondestructive estimation of rice LAI, and SPAD-502 on the Northern Plains of Cheongju. The LAI estimated by PCA tended to underestimate the LAI determined by actual measurement by about 20%. The estimation of LAI by PCA was judged to have a sufficient accuracy as a practical technique. A high positive correlation was obtained between the values of the SPAD reading and LAI. NDVI and LAI also showed a very high correlation. The values of the SPAD reading and LAI, and NDVI gave a high positive correlation. These results indicated that the method described in this study was effective as a simple and rapid method for the estimation of rice growth.

• Journal of Korea Multimedia Society
• /
• v.20 no.2
• /
• pp.153-162
• /
• 2017

Today, weather radar is used as a key tool for modern high-tech weather observations and forecasts, along with a wide variety of ground gauges and weather satellites. In this paper, we propose a frequency transform based weather radar image processing technique to improve the weather radar image damaged by beam blocking and clutter removal in order to minimize the uncertainty of the weather radar observation. In the proposed method, DCT based mean energy correction is performed to improve damage caused by beam shielding, and DWT based morphological image processing and high frequency cancellation are performed to improve damage caused by clutter removal. Experimental results show that the application of the proposed method to the damaged original weather radar image improves the quality of weather radar image adaptively to the weather echo feature around the damaged area. In addition, radar QPE calculated from the improved weather radar image was also qualitatively confirmed to be improved by the damage. In the future, we will develop quantitative evaluation scales through continuous research and develop an improved algorithm of the proposed method through numerical comparison.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.6
• /
• pp.167-174
• /
• 1998

The ultrasonic test is recognized for its significance as a non-destructive testing method to detect volume defects such as porosity and incomplete penetration which reduce strength in the weld zone. This paper illustrates the defect detection in the weld zone of ferritic carbon steel using ultrasonic wave and the evaluation of pattern recognition by chaotic feature extraction using time series signal of detected defects as data. Shown in the time series data were that the time delay was 4 and the embedding dimension was 6 which indicate the geometric dimension of the subject system and the extent of information correlation. Based on fractal dimension and lyapunov exponent in quantitative chaotic feature extraction, feature value of 2.15, 0.47 is presented for porosity and 2.24, 0.51 for incomplete penetration The precision rate of the pattern recognition is enhanced with these values on the total waveform of defect signal in the weld zone. Therefore, we think that the ultrasonic pattern recognition method of weld zone defects of ferritic carbon steel by ultrasonic-chaotic feature extraction proposed in this paper can boost precision rate further than the existing method applying only partial waveform.

• Corrosion Science and Technology
• /
• v.5 no.1
• /
• pp.33-38
• /
• 2006

Current coating practice requires the thickness of anti-corrosion organic coatings to be over $250{\mu}m$ for immersion parts of ships and offshore structures and the corrosion resistance of these coatings has been evaluated by destructive and qualitative analysis. Recently, Electrochemical Impedance Spectroscopy(EIS) method has been employed, as an alternative, to evaluate corrosion resistance of organic coatings. This method is characterized as being nondestructive, reproducible, and quantitative in evaluating aging of organic coatings. In this study, EIS method was adopted to quantitatively and effectively select the coating systems having optimized protective performance. Evaluations of several epoxy and epoxy/polyurethane coating systems typically used for ships and offshore structures were carried out in wet($50^{\circ}C$, $90^{\circ}C$) and dry(room temp.) environments to accelerate the degradation of the organic coatings. These results were compared with the conventional scribed(scratched) test results. The plausible prediction model for determining the remaining life-time of coating systems was also proposed based on variations of impedance data, FT-IR and $T_g$ measurements results.

• 연구논문집
• /
• s.28
• /
• pp.49-58
• /
• 1998

In order to analyse the scavenging efficiency in a poppet valve type 2-stroke engine. visualization of scavenging flow and quantitative experiments for measuring scavenging efficiency were performed. The effect of shroud angle in RSSV which was developed by KIMM was evaluated under steady flow rig applying single-cycle method. Also dynamic simulator was used by using gas sampling with $CO_2$ and $O_2$gas. The $90^circ$ shroud RSSV was found to be the highest efficient system, and single-cycle and dynamic simulator test are very effective to save time and cost for the development of a 2-stroke engine.