• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.2
• /
• pp.214-219
• /
• 2001

In this paper, the nonlinear behavior of ultrasonic wave in partially degraded material is considered. For this aim, FDM(finite difference method) model for the nonlinear wave equation was developed with the restriction to the 1-D longitudinal wave motion and how the partial degradation in material contributes to the detected nonlinear parameter was analyzed quantitatively. In order to verify the rightness of this simulation method, the relation between the detected nonlinear parameter and the continuous distribution of degradation obtained from simulation was compared with experiment results and the simulation and experiment results showed similar tendency. It can be known from simulation result that the degree of degradation, the range of degradation and the continuous distribution of degradation have strong correlation with the detected nonlinear parameter. As it was possible in these simulations that only special part is assumed as degraded one, the quantitative evaluation of partially degraded material may be obtained by using this method.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.129-132
• /
• 2007

In this study, for the establishment of the performance evaluation methods of repair material and method for reinforced concrete structure and the quality control standards of durability recovery method, the quantitative exposure data by exposure experiment under the coastal and normal atmosphere environment is accumulated and analyzed. Investigating and evaluating the result of exposure experiment during 54 months of exposure age under the coastal and normal atmosphere environment, Micro crack, swelling and spatting of surface coating material, crack of repair boundary parts and the great potential difference between repair part and non-repair part were somewhat generated. And the result shown that exposure specimen of coastal environment had lower electrode potential than exposure specimen of normal atmosphere environment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.107-117
• /
• 2016

STD method using a mean and standard deviation is widely used in various inspection systems. The result of detection using the STD method is very dependent on the threshold value. This paper proposes an adaptive defect detection algorithm to with a precise detection of an ultimate defect. The proposed method is determined threshold value adaptively using a skewness that indicates a similarity of intensity and normal distribution of image. In the experiment, we used a various TFT-LCD images for a quantitative evaluation of defect detection performance evaluation result to prove the performance of the proposed algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.829-840
• /
• 2001

In this study, we propose a method for quantifying the degree of advance of pulmonary emphysema by using chest X-ray images. With this method, we devise two schemes for this purpose. One is for detecting blood vessels by using a deformable model with the tree-like structure and using an evaluation function specialized by knowledge about blood vessels appeared in chest X-ray images, and the other is for quantifying the degree of advance by using several features, which were extracted from blood vessels, and the equation of quantitative evaluation. In order to evaluate the performance, we applied the proposed method to 189 ROIs(Regions of Interest) of ten chest X-ray images and compared the values by the proposed method with those by a medical doctor.

• Architectural research
• /
• v.22 no.4
• /
• pp.105-112
• /
• 2020

The purpose of this study is to establish a method for assessing a building's risk against disaster, tentatively named the Korean integrated disaster evaluation simulator (K-IDES). Based on previous studies, FEMA's risk management series and FEMA IRVS are selected as case studies for developing a frame work of K-IDES, through the comparative analysis of domestic building design guides, codes, and special acts related to disasters, in order to develop a risk assessment methodology for quantitative results. The assessment method consists of a classification system and calculating risk, and a simulation applying the developed checklist in K-IDES to similar types of high-rise buildings will be conducted to validate its accuracy. The final goal is to systemize an integrated risk management in a high-rise building against disasters for the purpose of recognizing vulnerable areas from the beginning of the design process and reinforcing it from potential threats after construction.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.10
• /
• pp.11-18
• /
• 2018

In this study, the cross-sectional image has been acquired to evaluate the aggregate distribution affecting quality of lightweight aggregate concrete, and through the binarization method, the study is to calculate the aggregate area of upper and lower sections to develop the method to assess the aggregate distribution of concrete. The acquisition of cross-section image of concrete for the above was available from the cross-sectional photography of cleavage tension of a normal test specimen, and an easily accessible and convenient image analysis software was used for image analysis. As a result, through such image analyses, the proportion of aggregate distribution of upper and lower sections of the test specien could be calculated, and the proportion of aggregate area U/L value of the upper and lower regions of concrete cross-section was calculated, revealing that it could be used as the comprehensive index of aggregate distribution. Moreover, through such method, relatively easy image acquisition methods and analytic methods have been proposed, and this indicated that the development of modeling to assess aggregate distribution quantitatively is available. Based on these methods, it is expected that the extraction of fundamental data to reconsider the connectivity with processes in concrete will be available through quality assessment of quantitative concrete.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.1
• /
• pp.63-76
• /
• 2012

Objective: The main objective of this study is to propose a user-centered assessment metric for ubiquitous services. Background: As the ubiquitous era took off, the interactions between ubiquitous services and users have come to take an important position. It is essential to conceptualize a new assessment model that considers human-system interaction capability with a user-centered design perspective. Method: The evaluation model for the interactivity of ubiquitous service was approached from the concept of usability and inter-personality of services. As a validation study, suggested assessment metric was utilized to evaluate the u-Home service. Priority weighting of each assessment metric was derived using the quantification type-I analysis. Results: To evaluate interactivity, this study suggested a quantitative metric for user testing performed after classifying the interactivity characteristics to contextualization; ubiquity; user experience; and service capability. Conclusion: This study suggest the metric for the ubiquitous service that are experienced in real life, and introduced the concept of ubiquitous service interactivity. Application: The suggested evaluation metric can be used to evaluate interactivity level of ubiquitous service and identify the potential problem and usability requirements at the early stage of service development.

• Journal of Korea Foundry Society
• /
• v.34 no.1
• /
• pp.14-21
• /
• 2014

Magnesium and its alloys are being applied to various kinds of industrial fields, especially their use on automotive parts and electronic part. These parts are manufactured mainly through diecasting process and magnesium ingots are used as raw materials. In the case that ingot quality is not secured, massive casting defects can occur and some manufactures can be damaged by the defects. This study is to evaluate ingots' cleanliness of magnesium alloys. It includes composition analysis by spectrometer, measurement of inclusion contents by SEM, brightness test on fractured surface and etc. Especially, the brightness test is a very easy and quick evaluation method. The brightness becomes low when the amount of oxides or inclusions on the surface increases. The brightness test data have been compared with those obtained from other methods for measuring the mount of impurities, which showed good relationship between the brightness and the others. Thus, the brightness test could be a promising method to measure the cleanliness of magnesium alloys.

• Journal of the Korean Society for Railway
• /
• v.2 no.2
• /
• pp.21-30
• /
• 1999

This study proposes the analysis and evaluation method of time series ultrasonic signal using the phase space-frequency domain. Features extracted from time series signal analyze quantitatively characteristics of weld defects. For this purpose, analysis objectives in this study are features of time domain and frequency domain. Trajectory changes in the attractor indicated a substantial difference in fractal characteristics resulting from distance shifts such as parts of head and flange even though the types of defects are identified. These differences in characteristics of weld defects enables the evaluation of unique characteristics of defects in the weld zone. In quantitative fractal feature extraction, feature values of 3.848 in the case of part of head(crack) and 4.102 in the case of part of web(side hole) and 3.711 in the case of part of flange(crack) were proposed on the basis of fractal dimension. Proposed phase space-frequency domain method in this study can integrity evaluation for defect signals of rail weld zone such as side hole and crack.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.1
• /
• pp.33-40
• /
• 2005

Gathering is method used to control fullness along a seam line. The purpose of this study was to investigate the relationship between the quantitative research and qualitative method; the effect of gather and the types of gather drape. The experimental design consists of four factors: (l) three kinds of different weight and thickness of fabrics (2) three kinds of stitch densities (3) five kinds of ratio of gathers (4) three kinds of grain directions. Therefore one hundred thirty five (135) samples were made. And utilized SPSS WIN 10.0 Package in data analysis. The results of this study were as follows; First, after frequency analysis, side height, hem line width, node depth, node count, node width accorded with these result data recording. Second, after correlation analysis, side height related with front statements. Side height and entire visual was negative correlation. Hem line width, node depth, node count with section statements was negative correlation but node width at section statements was positive correlation. Third, after $k^2$ analysis, front picture parts getting excellent evaluation were 1st side height, 3rd hem line width, 4th node depth, 3rd node count, 3rd node width. And section illustration parts getting excellent evaluation were 4th side height, 1st hem line width, 2nd node depth, 3rd node count, 4th node width.