• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.3
• /
• pp.175-183
• /
• 2012

Objectives: This study developed a harmonized method for risk assessment based on the Hazard & Risk Evaluation of Chemicals (HREC) according to the Industrial Safety and Health Act (ISHA). Methods: Three preliminary studies, performed during 2010 and 2011 by the Occupational Safety and Health Research Institute and three academic research groups, were compared. The differences in risk assessment, especially in the dose-response assessment method, were analyzed. A new harmonized method for dose-response assessment was suggested and its applicability for the HREC was examined. Results: Considering the various steps of each dose-response assessment, the equivalent steps in quantitative correction, uncertainty factor 2 (UF2) for intra-species uncertainty, and UF3 for the experimental period in the uncertainty correction were relatively high. Using our new method, the total correction values (quantitative correction plus uncertainty correction) ranged from 72~15,789 to 30~60, and the ratio of the threshold limit value (TLV) to the reference concentration decreased from 12.8~1900 to 5.4~11.8. Furthermore, when we performed risk characterization by our new method, hazard quotient (HQ) values for chloroethylene, epichlorohydrin, and barium sulfate became 3.0, 14.1, and 1.13 respectively, whereas three previous studies reported HQ values of 7.1, 4580, and 87.3 considering reasonable maximum exposure (RME) conditions. HQs of the three chemicals were calculated to be 0.6, 2.4, and 0.1 respectively, when compared to their TLVs. Conclusions: Our new method could be applicable for the HREC because the total correction values and the ratio of TLVs were within reasonable ranges. It is also recommended that additional risk management measures be applied for epichlorohydrin, for which the HQ values were greater than 1 when compared with both reference values and the TLV. Our proposed method could be used to harmonize dose-response assessment methods for the implementation of risk assessment based on the HREC according to ISHA.

• Journal of Internet Computing and Services
• /
• v.22 no.6
• /
• pp.99-113
• /
• 2021

In these days, as cyberspace has been recognized as the fifth battlefield area following the land, sea, air, and space, attention has been focused on activities that view cyberspace as an operational and mission domain in earnest. Also, in the 21st century, cyber operations based on cyberspace are being developed as a 4th generation warfare method. In such an environment, the success of the operation is determined by the commander's decision. Therefore, in order to increase the rationality and objectivity of such decision-making, it is necessary to systematically establish and select a course of action (COA). In this study, COA is established by using the method of classifying operational elements necessary for cyber operation, and it is intended to suggest a direction for quantitative evaluation of COA. To this end, we propose a method of composing the COES (Cyber Operational Elements Set), which becomes the COA of operation, and classifying the cyber operational elements identified in the target development process based on the 5W1H Method. In addition, by applying the proposed classification method to the cyber operation elements used in the STUXNET attack case, the COES is formed to establish the attack COAs. Finally, after prioritizing the established COA, quantitative evaluation of the policy was performed to select the optimal COA.

• The Journal of the Korea Contents Association
• /
• v.15 no.12
• /
• pp.525-533
• /
• 2015

The evolution of spectrum sharing technology enables the creation of many business scenarios and business models such as TV white space service. Business models considering spectrum sharing should guarantee economic feasibility for service providers and increasing benefit for service users. In addition, new business models should contribute to economic activation in the wireless telecommunication service industry. It is therefore necessary to design quantitative evaluation methods for selection of the best business models. The methods should reflect the various points of view of valuation. Our research addresses evaluation method for business models considering spectrum sharing. We define evaluation indicators to reflect the distinct characteristics of spectrum sharing. Also, we adopt analytic hierarchy process(AHP) to derive the weights of each indicator to evaluate business models considering spectrum sharing.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3 s.33
• /
• pp.92-99
• /
• 1999

High temperature and pressure materials in power plant are degraded by creep damage, if they are exposed to constant loads for long times, which occurs in load bearing structures of pressurized components operationg at elevated temperatures. Many conventional measurement techniques such as replica method, electric resistance method, and hardness test method for measuring creep damgage have been used. So far, the replica method is mainly used for the inspection of high temperature and pressure components. This technique is, however, restricted to applications at the surface of the testpieces and cannot be used to material inside. In this paper, ultrasonic evaluation for the detection of creep damage in the form of cavaties on grain boundaries or intergranular microcracks were carried out. And the absolute measuring method of quantitative ultrasonic velocity technique for Cr-Mo material degradation was analyzed. As a result of ultrasonic tests for crept for specimens, we founded that the sound velocity was decreased as increase of creep life fraction(${phi}c$) and also, confirmed that hardness was decreased as increase of creep life fraction(${phi}c$).

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2113-2116
• /
• 2010

Management of indoor air quality of underground subway station is an important issue. The air handling unit (AHU) installed in the underground subway station is the main facility determining the air quality of station. Especially for removing particulate matters, it is important to operate the appropriate air filter. However, there is no quantitative test method for existing air filter in site. It is rarely known that the collection efficiency of air filter can satisfy the designed criteria or not. In this study, we set the reference method using the mini-volume air sampler inside the AHU to evaluate the collection efficiency of different types of air filters. In addition, we applied the portable instrument based on the light-scattering method to the efficiency test. The method we applied in this study can be used in the evaluation of air filter in site.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.796-802
• /
• 2003

In this paper, an improved EUT(Equipment Under Test) evaluation method using image monitor for power frequency magnetic field immunity test was proposed and development of an automated real time image monitoring program was described. The proposed power frequence magnetic field immunity test detects automatically the change between the affected and unaffected image of EUT under the influence of electromagnetic wave. The proposed method for real time decision supplements shortcomings of the currently used method which is subjective to tester´s decision by ensuring the repeatability of the test. The change detection of EUT image provides a possibility of the immunity decision for PC monitors. In addition, the method to draw quantitative value in EUT immunity decision is suggested in accordance with the international standards and domestic trends.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5140-5147
• /
• 2012

It is difficult for systematic and flexible control reflecting regional characteristics with only public policies that control the landscape. Also, in the event that there is no preceding quantitative index calculation, it is impossible for the public society to come to an agreement. Therefore, the development of a shielding analysis simulation methodology that makes data processing modeling that can be interlinked with the urban information system is a very meaningful study. Thus, this study presents urban space shielding simulation technologies and quantitative analysis methodologies using 3D graphic engines and deduces the optimal design by integrating the data of the geographic information system (GIS) in order to suggest the potential as an analysis model that can be used in future urban information systems.

• Journal of the Korean Society of Safety
• /
• v.17 no.4
• /
• pp.110-118
• /
• 2002

During the last ten years, the need has been increase for reducing maintenance cost for aged equipments are ensuring safety, efficiency and profitability of petrochemical and refinery plants. American Petroleum institute(API) developed a code, API 581 for proposing standard procedures of risk based inspection. Even though the API 581 code covers general RBI procedures, there must be some limitations. In this study, a semi-quantitative assessment algorithm for RBI based on the API 581 code was reconstructed for developing an RBI software. The user-friendly realRBI software is developed with a module for evaluation semi-quantitative risk category using the potential consequence factor and the likelihood factor. Also, inspection planning module for inspection time and inspection method for equipments are included.

• Genomics & Informatics
• /
• v.20 no.2
• /
• pp.17.1-17.11
• /
• 2022

Genetic associations have been quantified using a number of statistical measures. Entropy-based mutual information may be one of the more direct ways of estimating the association, in the sense that it does not depend on the parametrization. For this purpose, both the entropy and conditional entropy of the phenotype distribution should be obtained. Quantitative traits, however, do not usually allow an exact evaluation of entropy. The estimation of entropy needs a probability density function, which can be approximated by kernel density estimation. We have investigated the proper sequence of procedures for combining the kernel density estimation and entropy estimation with a probability density function in order to calculate mutual information. Genotypes and their interactions were constructed to set the conditions for conditional entropy. Extensive simulation data created using three types of generating functions were analyzed using two different kernels as well as two types of multifactor dimensionality reduction and another probability density approximation method called m-spacing. The statistical power in terms of correct detection rates was compared. Using kernels was found to be most useful when the trait distributions were more complex than simple normal or gamma distributions. A full-scale genomic dataset was explored to identify associations using the 2-h oral glucose tolerance test results and γ-glutamyl transpeptidase levels as phenotypes. Clearly distinguishable single-nucleotide polymorphisms (SNPs) and interacting SNP pairs associated with these phenotypes were found and listed with empirical p-values.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.37-47
• /
• 2010

This research is aimed at comprehensively evaluating the condition of a road surface of a highway in satisfaction of its users. This research conducted an overall evaluation of a road surface condition by adding qualitative data, or a driver's satisfaction to the existing quantitative elements, whereas the existing research put its focus on a correlation analysis with quantitative factors and qualitative factors through a statistical method. As for an evaluation method, this research conducted an overall evaluation by using Grey System Theory which makes possible an integrated evaluation. The analyzed results make it possible to diagnose the current conditions of each section of object roads and to predict the potentially changeable conditions for the time to come. In addition, these analyzed results could hopefully be applied to the maintenance of freeways through diverse methods. It is hoped that the evaluation of a road surface condition of a highway in satisfaction of its user could be helpful to keeping up the satisfaction of a driver and passenger on the highway by more than a certain level. In addition, the analyzed data on the influence of data value observed by comprehensively evaluating a variety of elements could be used as a secondary means of the decision-making process in relation to road maintenance. On top of that, it could be used as a means of improving road maintenance system and offering the improved driving environment of the highway.