• Journal of the Ergonomics Society of Korea
• /
• v.14 no.2
• /
• pp.63-73
• /
• 1995

An approach to quantitative evaluation of product usability during the design and implementation phases of the product life cycle is presented. The evaluation starts by defining a set of usability characteristics, viz. physical, cognitive and affective characteristic. Each of these characteristics is assessed by a set of usability criteria, such as functionality, visual clarity, learmability, etc. The usability criterion is then evaluated by a checklist consisting of a detailed questionnaire. The fuzzy weighted-checklist method with linguistic variables is used for quantitative analysis. Also, the method for quantifying usability improve- ments in iterative design processes is considered. This analysis procides a quantit- ative measure, which reflects the degree of excellence of product usability during the design and development phases.

• Journal of Power Electronics
• /
• v.9 no.4
• /
• pp.553-566
• /
• 2009

In-phase control and energy-optimized control are the two major control strategies proposed for series power quality controllers (SPQC). However quantitative analysis and comparison between these two control strategies is quite limited in previous publications. In this paper, an extensive quantitative analysis is carried out on these two control strategies through phasor diagram approach, and a detailed quantitative comparison is conducted accordingly. The load current is used as the reference phasor, and this leads to a simpler and clearer phasor diagram for the quantitative relationship. Subsequently detailed analysis of SPQC using in-phase control and energy-optimized control are provided respectively, under different modes both for under voltage/voltage sag and for over voltage/voltage swell. The closed form analytic expressions and the curves describing SPQC compensation characteristics are obtained. The detailed system power flow is figured out for each mode, and the detailed quantitative comparison between the two control strategies is then carried out. The comparison covers several aspects of SPQC, such as required compensating voltage magnitude, required capacity of energy storage component, and maximal ride-through time. In the end, computer simulation and prototype experimental results are shown to verify the validity of all the analysis and the result of the comparison.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.4
• /
• pp.369-381
• /
• 2017

The objective of this study was to compare the wood anatomical characteristics of local tree species in Moluccas, Indonesia i.e., Moluccan ironwood (Intsia bijuga), linggua (Pterocarpus indicus), red meranti (Shorea parvifolia), and gofasa (Vitex cofassus). Qualitative evaluation was conducted by observing the anatomical structure in cross, radial, and tangential sections of each sample. For the quantitative evaluation, the dimensions of vessels, rays, and fibers were measured. Qualitative evaluation showed that crystals were observed in Moluccan ironwood, linggua, and gofasa, while resin canals were only observed in red meranti. Tyloses were frequently observed in gofasa but infrequently observed in linggua and red meranti. Quantitative evaluation showed that Moluccan ironwood with the higher density had thicker fiber wall, higher quantity of ray number, and wider rays than the other species. Red meranti had higher values of ray height and fiber length than the other three species. The results also revealed that linggua showed the highest values of relative crystallinity and crystallite width. Red meranti and gofasa showed similar values of relative crystallinity and crystallite width, while Moluccan ironwood showed the lowest values. The basic qualitative and quantitative anatomical characteristics discussed could provide useful information for further utilizations of such wood species.

• Korean Journal of Medicinal Crop Science
• /
• v.25 no.6
• /
• pp.381-388
• /
• 2017

Background: This study was conducted to acquire basic information on the phenotypic and genotypic characteristics of the germplasm of Panax ginseng C. A. Meyer collected from China and Korea, and identify the variations that can be utilized in ginseng breeding programs. Methods and Results: Quantitative parameters were evaluated, and used to compare and analyze on genetic polymorphisms in the germplasm. The genetic characteristics and classifications were compared and analyzed for each character. Stem length followed a normal frequency distribution ranging from 15.5 cm to 40.5 cm, with showing approximately 40% having a stem length of 20 - 30 mm. Stem diameters ranged from 2.7 mm to 11.3 mm. Stem number per plant ranged from 1 to 3; approximately 50% had a single stem, and 45% had two stems. A non-normal frequency distribution was observed for petiole number, with approximately 60% of the germplasm having 3 - 5 petioles. Petiole length exhibited a normal frequency distribution, raging from 4.5 to 10.6. Petiole angle in the germplasm ranged from $28^{\circ}$ to $89^{\circ}$ and seedstalk length ranged from 5.6 cm to 27.3 cm. Conclusions: The genetic polymorphisms identified by complete linkage clustering based on the quantitative characteristics of Panax ginseng C. A. Meyer collected from Korea and China were classified to 6 groups, namely I, II, III, IV, V, and VI with frequencies of 6.7%, 20.0%, 31.7%, 8.3%, 6.7%, and 26.7%, respectively.

• Journal of the Korean Society for information Management
• /
• v.27 no.4
• /
• pp.309-328
• /
• 2010

This study has analyzed the trend of the quantitative research by analyzing domestic dissertations on information literacy that were published since 2000. The procedures, regulations, and descriptive elements of the quantitative study were compared and analyzed for this study. In addition, the study used 5 variables and criterions to measure these items. Based on the calculations, the study has examined the general characteristics of the thesis, research method, sampling method and sampling population of the dissertations. The study has also analyzed the trend of the measurement variables by categorizing the characteristics by published year and majors. Furthermore, the study has also presented the trend of the usage of statistic analysis method on research purpose by classifying the method into each purpose.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.609-615
• /
• 2001

This study proposes analysis and evaluation method of time series ultrasonic signal using attractor analysis for fusion joint part of polyethylene piping. Quantitatively characteristics of fusion joint part is analysed features extracted from time series. Trajectory changes in the attractor indicated a substantial difference in fractal characteristics. These differences in characteristics of fusion joint part enables the evaluation of unique characteristics of fusion joint part. In quantitative fractal feature extraction, feature values of 4.291 in the case of debonding and 3.694 in the case of bonding were proposed on the basis of fractal dimensions. In quantitative quadrant feature extraction, 1,306 point in the case of bonding(one quadrant) and 1,209 point(one quadrant) in the case of debonding were proposed on the basis of fractal dimensions. Proposed attractor feature extraction can be used for integrity evaluation of polyethylene piping material which is in case of bonding or debonding.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04b
• /
• pp.64-67
• /
• 2000

Element distribution analysis and degradation characteristics of the ZnO varistors fabricated at the ambient sintering-process is investigated in this study. ZnO varistors made of Matsuoka's composition were fabricated by standard ceramic techniques. The ambient sintering-process is performed at the special electrical-furnace which is equipped with the vacuum system. The Gases of injection at sintering- process were oxygen, air, nitrogen and argon respectively. Element and quantitative analysis in the microstructure of ZnO varistors made use of EPMA equipment. Degradation characteristics were showed by DC degradation tests at $115{\pm}2\;^{\circ}C$ for period up to 13 h. From above analysis, it is found that at the DC degradation test the ZnO varistor sintered in oxygen atmosphere showed the excellent prop properties among them and these results could be explain by element and quantitative analysis in ZnO microstructure.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.9_10
• /
• pp.1036-1047
• /
• 2003

This study was carried out in the purpose of proposing internet marketing strategy which can make conversion rate higher through analysis of internet shopping behavior types. This study was executed in two stages; qualitative study, quantitative study. In the qualitative study, internet shopping behavior types were investigated through the In-depth interview and direct observation, and then in the quantitative study, differences of internet shopping behavior types according to consumer characteristics, product properties and shopping-mall types were examined. For qualitative study, 30 samples by focus sampling were inquired and for quantitative study, 334 data were collected through web survey. The results of this study are as follows: First, 7 Internet shopping behavior types of apparel were found through the qualitative study: cautious purchase by price comparison, searching purchase, special low price purchase, impulse purchase, prepurchase deliberation, information accumulation, recreation-oriented. Second, in relation to consumer characteristics, consumers that have many internet purchase experiences showed goal-directed behavior more and female did more special low price purchase behavior and impulse purchase behavior than male. Third, according to product properties, high price product led more cautious purchase by price comparison & prepurchase deliberation behavior and fashionable product led more information-searching behavior. In the case of low price and fashionable products, impulse purchase behaviors were showed more. Forth, according to Internet shopping mall types, category killer shopping mall visitors showed information search behavior, recreation-oriented behavior more.

• Journal of Applied Reliability
• /
• v.16 no.2
• /
• pp.134-146
• /
• 2016

Purpose: Many domestic companies have to make out quantitative evaluation table in their proposal when they conduct the software R&D project. However, most of companies have a difficulty to select the evaluation items and criteria, also to derive a quantitative results. Therefore, we propose a method to derive the quantitative evaluation index by utilizing the ISO/IEC 9126-2. Methods: Analyzing ISO/IEC 9126-2, and we classify the quality metrics as high-classification and sub-classification for Web/App software, Embedded software and Installation software. Next, Conduct the metrics selection survey depending on importance and necessity. Then, carry out the case study. Verify the correspondence between evaluation items and criteria from original suggestion of company and from outcome by utilizing the ISO/IEC 9126-2 quality metrics. Results: It is possible to classify into two metrics, one for common software or one another for only special software. Furthermore, there is quality metrics that is more important and more necessary depending upon characteristics of the software. Conclusion: ISO/IEC 9126-2 quality metrics can be used to make an evaluation items and criteria for quantitative evaluation table of software product.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.3
• /
• pp.115-125
• /
• 2018

In order to examine the ways to improve the efficiency of R&D investment, this paper presents analysis on both quantitative and qualitative efficiency of R&D projects. As Korea's R&D investment has significantly increased in recent years, the efficiency of R&D investment has attracted attention. In this paper, a Data Envelopment Analysis(DEA) method is used to construct models for quantitative efficiency and qualitative efficiency analysis. Based on a cases of agricultural R&D projects of Korea, the efficiency of national R&D projects were analyzed and their quantitative and qualitative efficiencies are compared. As a result, statistically significant difference between quantitative and qualitative efficiency was found. Also, characteristics of Decision Making Units(DMUs) which can influence both quantitative and qualitative efficiency were identified. In particular, the stage of a R&D project has significant impact on R&D efficiency. This study suggests that in order to enhance R&D efficiency both quantitative and qualitative nature of outputs should be considered when measuring R&D efficiency.