• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1688-1689
• /
• 2011

A simple and rapid capillary electrophoresis method was developed for the quantitative analysis of common triazine herbicides. Cyclic voltammetry was employed to clarify the detection voltage which showed characteristic irreversible cathodic peaks. For the analysis, the mixture of triazine herbicides was applied in a microfluidic chip to determine the CE-separated peaks. Soil sample extracts were analyzed directly after drying and redissolution with the supporting electrolyte but without other pretreatment. The results were comparable to those obtained by HPLC with UV detection. Therefore, this method can be used in the rapid determination of pesticide/herbicide residues.

• Journal of the Korean Society of Costume
• /
• v.56 no.5 s.104
• /
• pp.163-175
• /
• 2006

Department store service is undergoing a rapidly changing social phenomena that is, the qualitative evaluation is getting more attention than the quantitative evaluation. Therefore, in this study, a standard has been prepared according to a service quality evaluation and the result has been analyzed to prepare major points for quality improvement. The differences in perception between department store consumers and department store employees were verified based on these factor categories. Also an attempt was made to reveal the relationship between satisfaction and service quality. When considering all the results of this study, the department store consumers and the department store employees perceived service quality differently from each other. The result is that the characteristics of the users and the suppliers reflect exactly as they are because of the characteristic of the distribution environment.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.236-238
• /
• 2003

The electron transport coefficients, the electron drift velocity W, the longitudinal diffusion coefficient $ND_L$ and $D_L/\mu$, in pure Ne were calculated over the wide E/N range from 0.01 to 800 Td at 1 Torr by two-term approximation of the Boltzmann equation for determination of electron collision cross sections set and for quantitative characteristic analysis of Ne molecular gas.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.1
• /
• pp.44-47
• /
• 2009

This paper describes the information for quantitative simulation of weakly ionized plasma. We must grasp the meaning of the plasma state condition to utilize engineering application and to understand materials of plasma state. $SF_6$ gas is widely used in industrial of insulation field. In this paper, $N_2$ is mixed to improve pure $SF_6$ gas characteristics. Electron transport coefficients in $SF_6-N_2$ mixture gases are simulated in range of E/N values from 70 to 400 [Td] at 300K and 1 Torr by using Boltzmann equation method. The results of this method. which are ionization coefficient, attachment coefficient, effective ionization coefficient, and critical E/N, can be important data to present characteristic of gas for insulation. Specially critical E/N is a data to evaluate insulation strength of a gas and is presented in this paper for various mixture ratios of $SF_6-N_2$ mixture gases.

• Journal of KSNVE
• /
• v.7 no.3
• /
• pp.511-519
• /
• 1997

For a number of years it has been known that flexural vibration in a beam and plate can be damped by the application of layer of damping (viscoelastic) material that is in turn constrained by a backing layer or foil. In this study, a quantitative analysis of damping of the sandwich beam has been performed by using impact test. The damping is characterized by the loss factor .etha. in which the damping is normalized by imaginary part of the complex bending stiffiness of the beam. Results show that the relative thickness of the sandwich beam gives more effect on the riatural-frequencies and loss factor than the variation of width does. It is also shown that the Ross-Kerwin-Ungar equation and impact test can be effectively used to identify the damping characteristic of the sandwich beam and viscoelastic material.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.11a
• /
• pp.53-54
• /
• 2009

The preliminary quantitative analysis of proliferation resistance for the five nuclear fuel cycles demonstrated that the thermal MOX fuel cycle is most vulnerable to proliferation due to the presence of pure $PuO_2$ in the fuel cycle, while the once-through fuel cycle has the highest proliferation resistance. The innovative next generation fuel cycles such as Pyro-SFR and Wet-SFR were found to have similar levels of proliferation resistance to that of the DUPIC fuel cycle which is believed to have proliferation resistance strong enough for commercial deployment. The sensitivity analysis also demonstrated the effectiveness of the proposed methodology in applying to existing and/or newly developing nuclear fuel cycles so as to improve the proliferation resistance characteristic of the fuel cycle systems.

• 한국연소학회:학술대회논문집
• /
• 2000.05a
• /
• pp.189-196
• /
• 2000

A numerical simulation was conducted to analyze the interaction of flame and vortices. The characteristic scales of flame and vortices were limited in the thin laminar flamelet regime. Within this regime, flame is assumed as discontinuity surface and its motion in flow field was described by G-equation instead of full governing equations. Additional approximations include distribution of line volume sources on flame surface to simulate effect of volume expansion. Contrast to previous calculations, current study employed vortex transport equation to evaluate attenuation and smearing of vortices. Two extreme conditions of frozen vortex and frozen flame were considered to validate the current method. Comparison with direct numerical simulation resulted in satisfactory quantitative agreement with higher computational efficiency which warrants the usefulness of the present model in more complex situation.

• Journal of Multimedia Information System
• /
• v.1 no.1
• /
• pp.77-85
• /
• 2014

Usually, the skin pigmentation detection and diagnosis are made by clinicians. In this process it is subjective and non-quantitative. We develop an approach to detect and measure the different pigmentation lesions base on computer vision technology. In the paper we study several usually used skin-detecting color space like HSV, YCbCr and normalized RGB. We compare their performance with illumination influence for detecting the pigmentation lesions better. Base on a relatively stable color space, we propose an approach which is RGB channels vector difference characteristic for the detection. After the object region detection, we also use the difference to measure the difference between the lesion and the surrounding normal skin. From the experiment results, our approach can effectively detect the pigmentation lesion, and perform robustness with different illumination.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.68-71
• /
• 1997

The early detection of brest cancer is clearly a key ingredient for any strategy designed to reduce breast cancer mortality. Microcalcification(MCC) is one of the primary signatures to discriminate between normal and cancerous tissue. The detection and locating procedures can be automated by digital image processing, however, MCCs have various sizes, shapes, and intensity levels in film images, so it is difficult to find accurate locations and sizes. Firstly, we made quantitative analysis for many characteristic features of mammograms that can be used to segment MCCs from normal tissues. Secondly, we developed algorithms proper to segmentation like pattern matching. The performance was evaluated with TP and FP rates.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.384-388
• /
• 1997

Recently,direct rolling process has been drawing increasing interests because production cost be greatly reduced by eliminating subsequent hot rolling processes. Such a process has been characterized to prosuce thin steel strip (thickness 1~5mm) directly from molten metal and to skip over the conventional hot rolling processes. However, since there are several process parameters, which affect the quality of product,and their relationship between the parametersare very complex,it is therefore very difficult to realize the process design and the quality control. To overcome these difficulties quantitative relationship between the parameters are investigated through a numerical analysis. Form these results, it is found that solidification final point is the most important paramter which is critical to quality of the strip. Also,the multiple regression model is obtianed to determine their relationship from the solidification final point and roll separating force which can be easily estimated