• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2381-2386
• /
• 2000

Surface replication is playing an important role in the assessment of creep damage and remaining life of high temperature components. As the replication procedures, however, have not been standardized in domestic industry, its standardization is proposed in this study. For this purpose, the 2.25Cr-IMo steel was heat treated(5 min at 1,300 0C and oil quenched) to produce a simulated HAZ microstructure, and crept in air at 575 0C and under 120 MPa to produce artificial cavities. Then, the effect of surface preparation procedures on the quality of replicas was investigated using this sample. As a result, it was demonstrated that the presence of cavities may be observed readily or missed depending on the surface preparation procedures followed. Therefore it is essential to repeat three polishing/etching cycles at least in order to reveal cavitation damage accurately, even though it may be tedious or time-consuming.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.779-784
• /
• 2011

Free and forced vibration analysis of the global ship structure using the 3-dimensional finite element(FE) method requires not only the specialized knowledge such as ship structure interacted with fluid, damping and various excitations due to propulsion system but also time-consuming manual tasks in FE modeling, analysis and response evaluation. As a result, the quality of the vibration analysis highly depends on engineer's expertise and experience. In this study, a framework system to improve the efficiency of global ship vibration analysis is introduced. The system promising the utilization of MSC/Patran and MSC/Nastran consists of various modules to support data management, FE modeling of ship structure and loading, input deck generation for free and forced vibration analysis, data extraction and evaluation of analysis results, and databases for FE models of marine diesel engines and vibration criteria. The system may be useful for pursuing standardization of uncertain analysis factors as well as reducing time, cost and human dependency in ship vibration analysis.

• Korean Journal of Pharmacognosy
• /
• v.40 no.1
• /
• pp.18-24
• /
• 2009

GCSB-5 preparation is a purified extract from a mixture six herbal medicines (Acanthopanacis Cortex, Achyranthis Radix, Saposhnikoviae Radix, Cibotii Rhizoma, Glycine Semen Nigra, Eucommiae Cortex) that have been widely used in traditional medicine to treat various bone disorders. This study was carried out to obtain the HPLC analysis method that can be used to establish quantitative analysis of Glycine Semen Nigra and Eucommiae Cortex for standardization of GCSB-5 preparation. HPLC analysis methods for the simultaneous determination of genistin (Glycine Semen Nigra) and geniposide (Eucommiae Cortex) were established for the quality control of herbal medicinal raw material and preparation. And validation of HPLC analysis methods were conformed for verification of HPLC methods by check to specificity, linearity, intra-day precision, inter-day precision and accuracy following ICH guideline. As the result of quantitative analysis, the contents of genistin and geniposide in the raw material of GCSB-5 preparation were 0.0426-0.0427 mg/g and 0.431-0.432 mg/g. And GCSB-5 preparation contained genistin of 0.0202-0.0203 mg/capsule and geniposide of 0.211-0.212 mg/capsule, respectively.

• Journal of Information Technology Services
• /
• v.1 no.1
• /
• pp.67-80
• /
• 2002

This study aims to explore the ways of reinforcing the competitive edge and substance of company through e-business in furniture industry by presenting the e-business model of furniture industry which faces the opportunity of challenge in the course of industrial restructuring. e-business model can take various types depending on the environment, feature and competitive edge that each company faces. For example, it is general in the fields of manufacturing company to study the model by dividing into Sell Side for sales to the customers, and Buy Side for purchase of raw materials, Integrating both sides. In furniture industry, Sell Side has the feature of giving a priority in the quality and price rather than brand image in the purchase type of consumer. Especially, it shall not be overlooked that majority of furniture is delivered to the consumer indirectly through the construction company. As such, e-business should be promoted in a way to expand the point of contact for consumers, rather than to construct its own point of contact for consumers. The percentage of importation of raw lumber is high and the standardization was insufficient in Buy Side.

• Journal of Distribution Science
• /
• v.18 no.12
• /
• pp.5-13
• /
• 2020

Purpose: The objective of this study is to explore and prioritize strategic factors for revitalization of the sports contents distribution industry. Research design, data and methodology: To this end, strategic factors for revitalization of the sports contents distribution industry were explored based on literature review, and 14 experts were consulted to prioritize the factors. Results: Major conclusions deduced are the following: First, the factors were prioritized in order of legal policy factors, contents factors, and technical infrastructure factors. Second, subdomains of legal policy factors were prioritized in order of policy process factors, legislation enactment and revision factors, budget factors, business model factors focusing on sports contents. Third, subdomains of contents factors were prioritized in order of humanware contents factors, sports contents diversification factors, and high-quality sports contents production factors. Fourth, subdomains of technical infrastructure factors were prioritized in order of sports contents service platform factors, technical development and standardization, global distribution channel provision, and distribution metadata standardization. Conclusions: Findings of this study are of significance given that this study stratifies factors of sports contents distribution industry revitalization-about which there have been very few previous studies- analyzed mainly in terms of justifiability and timeliness, and presents preferential business strategies.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.336-343
• /
• 2022

Industrial robotic arms are widely adopted in numerous industries for manufacturing automation under factory settings, which eliminates the limitations of manual labor and provides significant productivity and quality benefits. The U.S. modular construction industry, despite having similar controlled factory environments, still heavily relies on manual labor. Thus, this study investigates the U.S., Canada, and Europe-based leading modular construction companies and research labs implementing industrial robotic arms for manufacturing automation. The investigation mainly considered the current research scope, industry state, and constraints, as well as identifying the types and specifications of the robotic arms in use. First, the study investigated well-recognized modular building associations, the Modular Building Institute (MBI), and renowned architecture design magazine, Dezeen to gather industry updates. The authors discovered one university lab and a few companies that adopted Switzerland-based robotic arms, ABB. Researching ABB robotics led to the discovery of ABB's competitor, Germany-based KUKA robotic arms. Consequently, research extended to the companies and labs adopting KUKA models. In total, this study has identified seven modular companies and four research labs. All companies employed robotic arms and gantry robot combinations in a production-line-like system for partial automation, and some adopted design standardization for optimization. The common goal among the labs was to achieve greater flexibility and full automation with robotic arms. This study will help companies better implement robotic arm automation by providing recommendations from investigating its current industry status.

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.687-698
• /
• 2014

ATSC is currently working on standardization of hybrid 3DTV broadcasting service in heterogenous network environment after completion of service-compatible 3DTV broadcasting service standard based on broadcasting channel. This paper proposes a convergence 3D video broadcasting method on broadcasting and IP network while guaranteeing a Full-HD 3D quality without degrading the image quality of legacy DTV. Specifically, this paper describes transmission of the 3D additional video using the ISO/IEC 23009-1 DASH, robust synchronization method under heterogenous network environments and system target decoder model for hybrid 3DTV receiver. Based on experimental results, we confirm that proposed technologies can be used as a core technology in the hybrid 3DTV standardization and a reference model for a development of hybrid 3DTV encoder and receiver.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.70-77
• /
• 2020

Configuration management is an important project management method. Configuration management is increasing daily and improving defense power as a management tool for technical data of power support systems. Configuration management work must be carried out properly from the beginning of development to acquire an excellent weapon system. In procurement, configuration management is a vital factor that can determine the cost of maintaining operations during the transfer of military supplies and carry out systematic management among operational support. Countries are making changes to policies and systems to manage R&D, standards, and patents in conjunction with each other from the beginning of research and execution, and it is important to establish the concept of managing and controlling the configuration as an efficient means of managing military resources. To identify the activity details during the entire life cycle from the beginning of acquisition to the end of disposal by linking munitions configuration control with the total life cycle, and redefine the appropriate work system, this study investigated and analyzed the U.S. configuration control procedures to identify the activity details and present areas to develop.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.1
• /
• pp.21-28
• /
• 2001

Enzyme linked-immunosorbent assay (ELISA) for a rapid detection of fungi, Aspergillus and Penicillium genera in food, were developed and their efficiencies were approved by detecting artificially contaminated agricultural commodities. Mice were immunized with partially purified Aspergillus flavus extracellualr polysaccharide (EPS) and lymph node cells of the mice were fused with the myeloma cells for production of monoclonal antibodies. Mab 1G11, one of the antibodies, was selected and purified. A sandwich ELISA was established and its detection limit toward A. flavus EPS was 1mg/ml. Among the 59 strains tested (including 18 species of Aspergillus, 16 of Penicillium, 11 of Fusarium, 1 of Absidia, 2 of Alternaria, 2 of Candida, 2 of Cladosporium, 2 of Geotrichum, 2 of Mucor, 2 of Rhizopus, 1 of Trichoderma), species of Aspergillus and penicillium had a high reactivity with Mab 1G11 even up to 10,000 times dilution of culture broths. The other genera except Cladosporium resinae showed no reactivity, thus Mab 1G11 was specific to the genera of Aspergillus and Penicillium. The epitope of A. flavus EPS against monoclonal Mab 1G11 was on the carbohydrate moiety when 1 to 100$\mu g/g$ A. flavus EPS were put into rice, potato, and mandarin orange, the average recoveries detected by sandwich ELIA were 123, 59, and 76%, respectively. Correlation was found to be linear between the EPS, and mycelium of A. flavus and Penicillium citrinum grown in a liquid medium (r=0.87 and 0.96), and also between the EPS and colony forming unit in solid media of rice of potato (r=0.91-0.99).

• The Journal of the Korea Contents Association
• /
• v.7 no.12
• /
• pp.231-237
• /
• 2007

Recently, numerous government institutions and information service organizations have shown interests in employing ISO 9001 Quality Management System(QMS) to increase their organizational performances. However, due to the gap between the system requirements and the process oriented goals in reality, they have not been able to merit from the ISO 9001 QMS. So, Korea Institute of Science and Technology Information(KISTI) has been designed a process oriented system by incorporating the process analysis results into the existing ISO 9001 system requirements for enhancing organizational competitiveness and promoting productivity through a process standardization. As a result, KISTI has been ISO 9001:2000 certificate in November 11, 2003. And we obtain a improvement of customer satisfaction and efficiency of work, reduction of work processing time using KQMS.