• Asian Journal of Atmospheric Environment
• /
• v.5 no.4
• /
• pp.278-291
• /
• 2011

Korea has experienced dramatic development and has become highly industrialized and urbanized during the past 40 years, which has resulted in rapid economic growth. Due to the industrialization and urbanization, however, air pollutant emission sources have increased substantially. Rapid increases in emission sources have caused Korea to suffer from serious air pollution. An air pollutant emissions inventory is one set of essential data to help policymakers understand the current status of air pollution levels, to establish air pollution control policies and to analyze the impacts of implementation of policies, as well as for air quality studies. To accurately and realistically estimate administrative district level air pollutant emissions of Korea, we developed a Korean Emissions Inventory System named the Clean Air Policy Support System (CAPSS). In CAPSS, emissions sources are classified into four levels. Emission factors for each classification category are collected from various domestic and international research reports, and the CAPSS utilizes various national, regional and local level statistical data, compiled by approximately 150 Korean organizations. In this paper, we introduced for the first time, a Korean national emissions inventory system and release Korea's official 2007 air pollutant emissions for five regulated air pollutants.

• Journal of Korean Society on Water Environment
• /
• v.28 no.3
• /
• pp.426-435
• /
• 2012

The variation of stream flow is the one of the most important factors which influence on that of water quality in the unit watershed. The target water quality goal is established and permissible load is allotted in the base of the standard flow condition along with its water quality for the management of Total Maximum Daily Loads (TMDLs). A standard flow selected could cause problems in the load allotment if it was not properly arranged. This study reviewed the acquisition of water quality data, the self-variation and the retainability in water quality on the specific flow conditions. This study also proposed the median and the adjusted average flow condition out of general flow conditions as alternative standard flow conditions. It is considered that the alternatives can make the water quality data easily acquired and the water quality representativeness more enhanced on the standard flow conditions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.11
• /
• pp.1641-1656
• /
• 2019

The present paper reviews the findings of different research studies on the effect of natural ingredients in the Japanese quail (Coturnix coturnix japonica) diet on carcass characteristics and meat quality. The results show a relationship between the type and concentration of ingredients used in diets and carcass characteristics and meat quality. The inclusion of medicinal herbs (thyme, black seed, and mint), plants (canola), seeds (chickpea), spices (cinnamon and coriander), worms (earthworms), bee products (propolis), phytochemicals (lycopene), and edible fungi (common mushrooms) in the diet improved carcass quality characteristics compared to the control diets (basal diets). The inclusion of medicinal herbs (spearmint and green tea), spices (cinnamon), vegetables (tomato), plants (verbena and canola), seeds (marijuana), and edible fungi (oyster mushrooms) improved meat quality. In conclusion, the use of ingredients of natural origin in the diet of Japanese quail improves carcass quality characteristics and meat quality.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.142-144
• /
• 2000

This paper presents an auxiliary TCSC controller designed for damping SSR. Damping controller for SSR is designed in frequency domain for suppressing resonance. The SSR phenomenon and the performance of damping controller simulated by using PSCAD/EMTDC. In this simulation. the power system model for SSR is IEEE benchmark Model and TCSC is simplified to controllable impedance model.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.4
• /
• pp.319-329
• /
• 2015

The characteristics of aerosol light extinction were investigated by comparing measured and calculated extinction coefficient to understand the contribution of air pollutants on visibility impairment for data during 4 months (Jan~ April), 2014. The integrated nephelometer and aethalometer system were installed to measure the scattering and absorption coefficients of aerosol as well as BAM 1020, MARGA, semi-continuous OCEC analyzer, and online-XRF to calculate the extinction coefficient. The IMPROVE_2005 equation was used to determine the contributions of different chemical components on visibility impairment in $PM_{2.5}$ and $PM_{10}$ due to highest correlation with measured data. Sulfate, nitrate, and organic mass by carbon (OMC) of fine aerosol were the major contributors affecting on visibility impairment. Total contributions to light extinction were calculated as $631.0Mm^{-1}$ for the worst-case and $64.4Mm^{-1}$ for the best-case. The concentrations of aerosol component for the worst-case were 38.4 times and 45.5 times larger than those of the best-case for $(NH_4)_2SO_4$ and $NH_4NO_3$, respectively. At lower visibility condition, in which extinction coefficient was higher than $400Mm^{-1}$, extinction coefficient varied according to the relative humidity variation regardless of $PM_{2.5}$.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.3
• /
• pp.187-196
• /
• 2021

When evaluating the extent of the impact of water pollutants on the surrounding area, we would like to present the target level (proposal) of the quality of the environment, which is the standard for evaluation. We propose the environmental quality target level for substances that need to be applied domestically by investigating overseas cases operating the integrated environmental management system and the implications of domestic environmental pollutant management. The appropriateness of the environmental quality target level reviewed in this study was determined using data from the water quality measuring network, and future improvement measures were proposed. We review the available methodologies for setting quality objectives for the environment. It proposed the environmental quality target level for 21 substances that have domestic water pollutant emission standards and do not have environmental standards, and proposed future improvement measures. If it is necessary to add quality target-level items of the environment in the future, it is believed that expansion will be possible based on the methodology presented in this study.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.1
• /
• pp.11-20
• /
• 2014

This research examined the effect of the quality of aggregate on concrete workability and compressive strength through an investigation into regional aggregate used in domestic ready mixed concrete plants. Through the research, it was found that aggregate for ready mixed concrete shows poor quality overall. The main factor of deterioration in the quality of the concrete is the particle size of fine aggregate and fine particle content in coarse aggregate. The quality of aggregate significantly influences concrete's workability, which is defined based on 0.08mm passage related with powder and absorption. In addition, poor aggregate quality leads to increased water content in concrete to secure workability, which is related with a decline in the compressive strength and durability of concrete.

• Journal of Korean Society on Water Environment
• /
• v.28 no.4
• /
• pp.574-581
• /
• 2012

It is important to analyze the status of water quality with relation to the stream flow to attain water quality goal more effectively in the unit watersheds for the management of Total Maximum Daily Loads (TMDLs). This study developed a flow duration-water quality distribution graph to figure out water quality appearances on the flow variation and analyzed contributions of water quality observations to the impaired water bodies quantitatively by hydrologic conditions. Factors relating to water quality variation can be analyzed more precisely and assessed on the base of quantified contributions. It is considered that this approach could be utilized to establish a more effective plan for the water quality improvement including the prioritization of pollution reduction options.

• Journal of Environmental Impact Assessment
• /
• v.22 no.5
• /
• pp.537-546
• /
• 2013

In the Seoul Metropolitan Area(SMA) photochemical air pollutants, nitrogenic compound and particulate matters have increased substantially due to mobile sources, power plants and so on. Therefore 'Special Act on Seoul Metropolitan Air Quality Improvement' was enacted on 2003 in order to improve air quality in the SMA. According to the Special Act, Central and local government have developed the state implementation plan(SIP) to reduce air pollutant emissions from various local sources. One of the key elements of the SIP development is the air quality modeling since modeling results can be used to establish emissions control strategies as well as to demonstrate attainment of air quality goals for ozone, particulate matter, and so on. Air quality modeling, therefore, can be usefully utilized to investigate the effects of government's efforts according to control strategies or measures. Using the air quality model, we can determine whether the implementation plan should be revised or not. A number of questions, however, has been raised concerning accuracy, consistency and transparency of modeling results because if we do not trust modeling results, all the measures dependent on modeling becomes in vain. So, without dealing with these questions, we can not guarantee the reliability and utilizability of air quality modeling results. In this study, we tried to establish standard methodology for air quality modeling in order to ensure consistency and transparency of modeling results used in the development and evaluation of national air policy. For this purpose, we established air quality modeling guideline to provide or recommend modeling procedures, vertical and horizontal domains, input data of meteorological and air quality modeling and so on.

• Journal of Korean Society for Quality Management
• /
• v.52 no.1
• /
• pp.77-93
• /
• 2024

Purpose: The purpose of this study is to examine machine learning use cases in manufacturing companies from a digital quality management (DQM) perspective and to analyze and present machine learning research patterns from a quality management perspective. Methods: This study was conducted based on systematic literature review methodology. A comprehensive and systematic review was conducted on manufacturing papers covering the overall quality management process from 2015 to 2022. A total of 3 research questions were established according to the goal of the study, and a total of 5 literature selection criteria were set, based on which approximately 110 research papers were selected. Based on the selected papers, machine learning research patterns according to quality management were analyzed. Results: The results of this study are as follows. Among quality management activities, it can be seen that research on the use of machine learning technology is being most actively conducted in relation to quality defect analysis. It suggests that research on the use of NN-based algorithms is taking place most actively compared to other machine learning methods across quality management activities. Lastly, this study suggests that the unique characteristics of each machine learning algorithm should be considered for efficient and effective quality management in the manufacturing industry. Conclusion: This study is significant in that it presents machine learning research trends from an industrial perspective from a digital quality management perspective and lays the foundation for presenting optimal machine learning algorithms in future quality management activities.