• International Journal of Quality Innovation
• /
• v.6 no.1
• /
• pp.109-118
• /
• 2005

The parameter design is the most emphasized measure by researchers for a new products development. It is critical for makers to achieve simultaneously in both the time-to-market production and the quality enhancement. However, there are difficulties in practical application, such as (1) complexity and nonlinear relationships co-existed among the system's inputs, outputs and control parameters, (2) interactions occurred among parameters, (3) where the adjustment factors of Taguchi's two-phase optimization procedure cannot be sure to exist in practice, and (4) for some reasons, the data became lost or were never available. For these incomplete data, the Taguchi methods cannot treat them well. Neural networks have a learning capability of fault tolerance and model free characteristics. These characteristics support the neural networks as a competitive tool in processing multivariable input-output implementation. The successful fields include diagnostics, robotics, scheduling, decision-making, prediction, etc. This research is a case study of spherical annealing model. In the beginning, an original model is used to pre-fix a model of parameter design. Then neural networks are introduced to achieve another model. Study results showed both of them could perform the highest spherical level of quality.

• MALSORI
• /
• v.55
• /
• pp.119-130
• /
• 2005

The aim of this paper is to investigate some acoustical characteristics of the voice quality features from the emotional speech database. Six different parameters are measured and compared for 6 different emotions (normal, happiness, sadness, fear, anger, boredom) and from 6 different speakers. Inter-speaker variability and intra-speaker variability are measured. Some intra-speaker consistency of the parameter change across the emotions are observed, but inter-speaker consistency are not observed.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.250-253
• /
• 2009

This paper presents NR (No Reference) Quality assessment method for IPTV or mobile IPTV. Because No Reference quality assessment method does not access the original signal so it is suitable for the real-time streaming service. Our proposed method use decoding parameters, such as quantization parameter, motion vector, and packet loss as a major network parameter. To evaluate performance of the proposed algorithm, we carried out subjective test of video quality with the ITU-T P.910 ACR (Absolute Category Rating) method and obtained the mean opinion score (MOS) value for QVGA 180 video sequence coded by H.264/AVC encoder. Experimental results show the proposed quality metric has a high correlation (84%) to subjective quality.

• Journal of Korean Society for Quality Management
• /
• v.27 no.2
• /
• pp.126-142
• /
• 1999

Robust design is an approach to reducing performance variation of quality characteristic values in quality engineering. Taguchi has an idea that mean and variation are handled simultaneously to reduce the expected loss in products and processes. Taguchi parameter design has a great deal of advantages but it also has some disadvantages. The various research efforts aimed at developing alternative methods. In the Taguchi parameter design, the product-array approach using orthogonal arrays is mainly used. However, it often requires an excessive number of experiments. An alternative approach, which is called the combined-array approach, was suggested by Welch et. al. ( 1990) and studied by others. In these studies, only single quality characteristic was considered. In this paper we propose how to simultaneously optimize multiple quality characteristics using desirability function when we used the combined-array approach to assign control and noise factors. An example is illustrated to show the difference between the Taguchi's product-array approach and the combined-array approach.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.273-277
• /
• 2007

In case of the Hydraulic Turbine Dynamo operating for Waterpower Generation, it makes very huge and loud noises, and it influences bad effect physically as same as mentally to those people who are working inside of power plant, and brings the decline of an effective working efficiency. However, its evaluation method or measure about such noise reflects merely its physical attribute which is sensuous Loudness of the Noise itself, since the accumulation effect of Noise or the meaning connected with psychological response did not reflect, it is the actual state that a rational evaluation is unable to expect. Consequently, this Study has attempted to evaluate the Noise of Hydraulic Turbine Dynamo by analyzing the sound quality using Zwicker‘s Psychological Acoustic Parameter, after classification by its positions of the Noise occurring at Hydraulic Turbine Dynamo.

• Journal of Integrative Natural Science
• /
• v.13 no.3
• /
• pp.92-96
• /
• 2020

Taguchi's robust parameter design is an approach to reduce the performance variation of quality characteristics in products and processes. In robust design, the signal-to-noise ratio (SN ratio) was used to find the optimum condition to minimize the variation of quality characteristics as much as possible and bring the average of quality characteristics closer to the target value. In this paper, we propose a simultaneous optimization method based on a linear model of the SN ratio as a method to find the optimal condition of the control factor in case of multi-characteristics. In addition, the proposed method and the existing method were compared and studied by taking actual cases.

• Journal of Korean Society for Quality Management
• /
• v.30 no.1
• /
• pp.97-117
• /
• 2002

We apply Taguchi method to the process optimization problem of chemical reaction process, and some case studies are done to find out the way for cost reduction and quality improvement The parameter and tolerance designs of Taguchi mettled are done with operation data of a chemical process and we propose a procedure how to use and analyze the operation data to find the optimal process conditions and tolerance limits. In order to use the continuous values in experiment conditions, it is suggested how to determine the interval of each level by discrete values and to treat any missing values caused from discrete 4 levels.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.39
• /
• pp.243-254
• /
• 1996

In this study, a model and an analysis method for parameter design is presented a linear relation between the input signal and the ideal value of a performance characteristic. Furthermore, There presented a new performance measure, expected quality loss after adjustment, which is proved to be equivalent to Taguchi's SN ratio approximately. On the basis of this, a two-step optimization procedure is proposed for parameter design considering the signal factor and the quality characteristics with continuous variable. Proposed procedure and Taguchi two-stage procedure are compared.

• Journal of Korean Society for Quality Management
• /
• v.52 no.1
• /
• pp.135-148
• /
• 2024

Purpose: This study is to investigate the literature on accelerated tests based on the acceleration model and to provide a compilation of results on the parameters applied in the acceleration model and the test conditions. Methods: This research is conducts a literature review on accelerated tests using the acceleration model, with a focus on test targets, test conditions, and parameter values. The study is organizing the results of this literature review to facilitate their application in the design of reliability tests. Results: A literature review investigated a variety of test targets, test conditions, and parameter values. Conclusion: The results of the literature research conducted revealed various acceleration model parameter. Such literature research on accelerated tests can establish the foundation for reliability test design and contribute to future product development and quality improvement

• Journal of Korean Society for Quality Management
• /
• v.33 no.4
• /
• pp.117-122
• /
• 2005

Variable sampling rate(VSR) scheme varies the sampling rate for the current sample depending on the previous value of the control statistic. In this paper, we propose EWMA control charts with variable parameter(VP) scheme, which allows both the sample rate(the sample size or the sampling interval) and the weight to vary. We investigate the effectiveness of the VP scheme relative to the fixed parameter(FP) scheme and the VSR scheme in EWMA control charts. It is shown that using the VP scheme gives some improvements to the ability in detecting small and moderate shifts in the process normal mean.