• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2004년도 품질경영모델을 통한 가치 창출
• /
• pp.490-495
• /
• 2004

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.773-776
• /
• 1999

For providing good quality power steadily, it is required that operators manipulate the control system of power plant with the good knowledge of power plant system and the control strategies, and cope with accidents effectively. With those requirements, it is general to train operators in power plant control room using full-scope simulator. A full scope simulator adopts the I&C instruments in the main cotrol room, so has to include I/O interface system to interface the simulation computer with I&C instruments in main control room. In already developed simulators, most of I/O interface systems are closed. vendor-dependent. proprietary systems. so have the many disadvantages in terms of cost and maintenance. In this paper. we suggest the method to configure I/O interface system for Thermal Power Plant Simulator based on standard technology which gives the advantages of ease-of-use. cost effectiveness, and simplicity of maintenanceuse by using off-the-shelf products for system integration.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.3-10
• /
• 1999

There is an increasing demand for using rock anchors as foundations in many geotechnical engineering structures such as transmission towers, dams, etc. For investigate the behavior and strength of rock anchors, in-situ pull-out tests were carried out. From the tests, various forms of failure of rock anchors were observed. Ultimate capacity of each failure modes of 1) Tendon failure, 2) Interface failure(tendon-grout interface, sheath-grout interface and grout-rock interface), 3) Combined interface failure, was obtained by varying the parameters such as diameter and length of tendon, grout strength, and quality of rock.

• 센서학회지
• /
• 제18권6호
• /
• pp.409-416
• /
• 2009

A lot of valuable-piece of information are acquisited through ubiquitous sensor network(USN) system composed of man-made sensors. The telemetry system used for communicating to access informations between nature and human-beings monitors and estimates the status of infrastructure, utilities and natural environments to prevent hidden disasters, improving quality of life and productivity in multi-directional views. That would be the reason of USN subsistence. This paper will be a review on how to build long-term USN system. Therefore, this paper focuses on reviewing the sensor interface and the sensor network interface and its significance as the foundation stone for varying USN service profiles and showing its development example, and finally proposing a few of things to set up future-oriented USN open system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.299-303
• /
• 2001

Adherend-adhesive interface failure will occur on a macroscale when surface preparation or material quality are poor. It is well known that the stress singularity occurs at the edges of interface between the adhernds and the adhesive, and that crack will initiate from these positions. Also if bubbles are created and remained in the adhesive layer during the bonding process, the stress concentrates around these hole defects. In this paper, the effects of the hole defects on the SIF of interface crack were examined. From results, SIF increased with the hole defects near the interface crack and increased with an decreae in the upper adherend thickness, an increase in the center adhesive thickness.

• 한국인터넷방송통신학회논문지
• /
• 제12권5호
• /
• pp.255-260
• /
• 2012

현재 운영되는 주요 하 폐수 처리시설 관리에 있어 환경 보호를 위한 엄격한 규제로 수질오염 측정 시스템에 관한 시스템이 부각되고 있다. 하지만 기존 하 폐수 처리 시스템은 하 폐수에 특화된 수질감시 기술이 미흡하며, 그중 센서와 네트워크를 통한 1:n 데이터 전송이 아닌 1:1을 지향하며, 이기종간 통신방식에 대한 호환성이 미비하다. 또한, 주로 수동방식의 검출방식을 준수하고 있다. 이에 본 논문에서는 수질복원시설물 내에 자동화된 센서 네트워크 통합 인터페이스를 위한 센서와 수질감지통합인터페이스간의 효율적인 데이터 전송에 관한 프로토콜 기술에 관해 연구하였다. 센서 네트워크 통합 인터페이스용 모니터링 구현을 통해 이기종간 통신방식으로 원활한 데이터 전송이 가능함을 입증하였다.

• Advances in Computational Design
• /
• 제4권1호
• /
• pp.33-41
• /
• 2019

In this study, 2-mm Al/Cu bimetallic laminates were produced using asymmetric roll bonding (RB) process. The asymmetric RB process was carried out with thickness reduction ratios of 10%, 20% and 30% and mismatch rolling speeds 1:1, 1:1.1 and 1:1.2, separately. For various experimental conditions, finite element simulation was used to model the deformation of bimetallic Al/Cu laminates. Specific attention was focused on the bonding strength and bonding quality of the interface between Al and Cu layers in the simulation and experiment. The optimization of mismatch rolling speed ratios was obtained for the improvement of the bond strength of bimetallic laminates during the asymmetric RB process. During the finite element simulation, the plastic strain of samples was found to reach the maximum value with a high quality bond for the samples produced with mismatch rolling speed 1:1.2. Moreover, the peeling surfaces of samples around the interface of laminates after the peeling test were studied to investigate the bonding quality by scanning electron microscopy.

• 한국기계가공학회지
• /
• 제11권6호
• /
• pp.75-81
• /
• 2012

Dissimilar material friction welding such as STD11 and SCM440, we are considering of such things as strength and tenacity of welding interface, which consist of friction welding rotation frequency, friction heating pressure, upset forging-pressure, friction heating time, and upset forging-pressure time. From the study, obtaining the interrelationship between welding condition and quality(toughness, tenacity), we can set the best range of welding condition. while performing acoustic emission examination for the nondestructive evaluation, we can deduce the interrelationship among total acoustic emission counts, friction welding variable, and quality during friction welding, which can solve the manufacturing difficulty and enhance the economic value.

• Journal of Multimedia Information System
• /
• 제5권3호
• /
• pp.215-220
• /
• 2018

This work presents a smart water quality sensor for hydroponic plant growing applications. The proposed sensor can effectively measure pH level and electrical conductivity of the water solution. The micro-controller incorporated in the sensor processes the raw sensor data, and converts it into a readable format. In addition, through the mobile interface realized using a WiFi module, the sensor can send data to the web server database that collects and stores the data. The data stored in the web server can be accessed by a personal computer or smart phone. The prototype sensor has been implemented, and the operations have been verified under an actual hydroponic plant growing application.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제9권4호
• /
• pp.331-341
• /
• 2009

PSA (Pressure Sensitive Adhesive) is used for various purposes in electronic appliances such as double-sided tape for fitting parts, product's name plate, and surface protecting film, and so forth. In several kinds of PSAs, this paper dealt with the failure analysis of PET (Polyethylene Terephthalate) acrylic adhesive tapes. The causes of interface failure were investigated through the test of adhesive strength, thickness, and structure. And test standard methods to prevent recurrences were established.