• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.93-94
• /
• 2019

When the fire door is recently installed in the field, there are frequent cases where the fire door is manufactured with fire door having low quality or different structure compared to the performance that the fire door producer has confirmed in the performance test or the construction specification. In order to improve the on-site quality management of the fire door, we comprehensively classify the quality management items of the fire door according to the management subject and the step by stage and set the field quality management procedure, the field quality management inspection item, regulations and standardized checklists were presented.

• 품질경영학회지
• /
• 제5권2호
• /
• pp.21-28
• /
• 1977

• 품질경영학회지
• /
• 제26권3호
• /
• pp.46-59
• /
• 1998

The problem of selecting optimal target values for the mean of the quality characteristic of interest for a production process in which an item is sold in one of two market with different profit / cost structures or reworked. Two profit models are constructed which involve four profit / cost components: profit, production, inspection, and rework costs. Assumed that the quality characteristic of interest is normally distributed, methods of finding the most profitable process mean are presented and a numerical example is given.

• 품질경영학회지
• /
• 제30권1호
• /
• pp.74-96
• /
• 2002

The objectives of this study is to suggest the rectifying sampling inspection plan considering quality cost. Limiting quality level(LQL) plans(also called LTPD plans) and outgoing quality(OQ) plans are considered. The Hald's linear cost model is discussed with and without a beta prior for the distribution of the fraction of nonconforming items in a lot. It is assumed that the sampling inspection is error free. We consider the design of reliability acceptance sampling plan (RASP) for failure rate level qualification at selected confidence level. The lifetime distribution of products is assumed to be exponential. MIL-STD-690C and K C 6032 standards provide this procedures. But these procedures have some questions to apply in the field. The cost of test and confidence level(1-$\beta$ risk) are the problem between supplier and user. So, we suggest that the optimal life test sampling inspection plans using simple linear cost model considering product cost, capability of environment chamber, environmental test cost, and etc. Especially, we consider a reliability of lots that contain some nonconforming items. In this case we assumed that a nonconforming item fail after environmental life test. Finally, we develope the algorithm of the optimal sampling inspection plan based on minimum costs for rectifying inspection and RASP. And computer application programs are developed So, it is shown how the desired sampling plan can be easily found.

• 품질경영학회지
• /
• 제34권2호
• /
• pp.12-21
• /
• 2006

This paper considers the problem of selecting the most profitable process mean for production processes where measurement errors exist in inspection systems. For such situations, a sequential inspection procedure is proposed to reduce measurement errors. The decision to accept, reject, or take an additional inspection of an item is made at every measurement point until the number of repeated measurements reaches its upper bound. An expected profit model is constructed and the optimal process mean, the cut-off values, and the upper bound of the number of repeated measurements are obtained when accepted(rejected) items are sold at regular(reduced) price. A numerical study is performed to investigate the performance of the proposed procedure.

• 품질경영학회지
• /
• 제24권4호
• /
• pp.207-223
• /
• 1996

These days, customers have attached great importance to the function of product liability and quality assurance. In Korea, the single rectifying sampling inspection for attribute (KS A 3105) has been used. But this inspection plan given by tables (KS A 3105) has some defects. There are limitations in the range of applications and irrationality of approximate probability and the double rectifying sampling inspection is not mentioned. Moreover, ATI (average total inspection) does not reflect sampling costs and the loss of nonconforming item. Therefore, the objectives of this study is to develope new algorithms and computer program that provide the optimal sampling inspection plan based on minimum linear costs (single & double inspection plan). The result of this study revealed that the new algorithm is less than KS A 3105 in ATI and basically, double inspection plan is more economical. Also it comes over restrictions in KS A 3105. So, it is definite that the optimal solution can be obtained considering cost factors in manufacturing and sampling process, and costs can be saved in the long term.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 춘계학술대회
• /
• pp.334-337
• /
• 2006

This paper considers the problem of selecting the most profitable process mean for production processes where measurement errors exist in inspection systems. For such situations, a sequential inspection procedure is proposed to reduce measurement errors. The decision to accept, reject, or take an additional inspection of an item is made at every measurement point until the number of repeated measurements reaches its upper bound. An expected profit model is constructed and the optimal process mean, the cut-off values, and the upper bound of the number of repeated measurements are obtained when accepted(rejected) items are sold at regular(reduced) price. A numerical study is performed to investigate the performance of the proposed procedure.

• 품질경영학회지
• /
• 제33권4호
• /
• pp.111-116
• /
• 2005

This paper considers the problem of optimally choosing the sub-process means of a mixture production process where two important ingredients are mixed. The quantity of each ingredient is controlled through each corresponding sub-process. The values of the sub-process mean directly affect the defective rate, production, scrap and reprocessing costs for the mixture production process. After inspecting every incoming item, each conforming item is sold in a regular market for a fixed price and any nonconforming item is scraped. A model is constructed on the basis of the selling price, production, inspection, and scrap and reprocessing costs. The goal is to determine the optimum sub-process mean values based on maximizing expected profit function relating selling price and cost components. A method of finding the optimum sub-process means is presented when the quantities of the two ingredients are assumed to be normally distributed with known variances. A numerical example is given and numerical studies are performed.

• 대한산업공학회지
• /
• 제30권2호
• /
• pp.84-92
• /
• 2004

A process control procedure is proposed when 100% inspection is performed in a process with excellent capability. Only the incomplete measurement data is assumed to be available, i.e. the specific measurement value of the quality characteristic is not available for each item but it can be determined to be smaller or larger than any prescribed value. In the suggested model, a signal limit is introduced to determine whether the process under study is in control or not. If the quality characteristic of an incoming item exceeds the upper signal or the lower signal limit, the process is determined to be stopped or not by comparing the number of consecutively accepted items with a predetermined threshold number. The procedure is designed based on the type I and II errors. The performance of the model is evaluated by the expected number of items produced under the in-control and out-of-control states until the process is stopped.

• 품질경영학회지
• /
• 제27권1호
• /
• pp.35-45
• /
• 1999

A process monitoring procedure using a correlated variable is presented when a lower specification limit is given on the performance variable. Every item is inspected with a variable correlated with the performance variable. When an item is rejected in the screening inspection, the process is checked for change using the mean and variance of measurements of the correlated variable for n preceding items including the rejected one. The performance variable is assumed to be normally distributed. A linear relationship between the performance and surrogate variables is assumed with normally distributed error term. The monitoring procedure is designed so that the prespecified outgoing quality can be attained.