• Journal of Wetlands Research
• /
• v.21 no.3
• /
• pp.244-250
• /
• 2019

Due to the industrial development and population growth, it has recently been shown that there are many problems caused by the rinked treatment water in local goverments and sewage treatment plants. The rinked treatment water has a characteristic of low flow rate and high concentration unlike general sewage. These characteristics increase sewage treatment difficulty and sewage treatment fee of sewage treatment facilities. Among the many influencing factors that increase sewage treatment unit cost, 'linked treatment load/design inflow load (%)' was derived as the most correlated factor. Through the selection and modeling of sewage treatment plants, the excess scope of design discharge water quality was investigated under the conditions of temperature and the conditions of 'linked treatment load/design inflow load (%)' taking into account the effects of the four seasons. The study found that for TN, 'linked treatment load/design inflow load (%)' was 19.7%, 22.6%, 25.1%and 27.7%, respectively, under conditions of $5^{\circ}C$, $10^{\circ}C$, $20^{\circ}C$ and $25^{\circ}C$. In case of TP, 'rinked treatment load/design inflow load (%)' was 10.7%, 12.2%, 15.6% and 17.5% at $5^{\circ}C$, $10^{\circ}C$, $20^{\circ}C$, and $25^{\circ}C$, respectively, under conditions of $5^{\circ}C$, $10^{\circ}C$, $20^{\circ}C$ and $25^{\circ}C$.

• Journal of Life Science
• /
• v.29 no.7
• /
• pp.774-778
• /
• 2019

Soybean [Glycine max (L.) Merr.] is one of the major food sources of protein, oil, carbohydrates, isoflavones, and other nutrients for both humans and animals. However, soybean seeds contain antinutritional factors, such as lectin protein, Kunitz Trypsin Inhibitor (KTI) protein, and stachyose. The objective of this research was to stack recessive alleles for development a triple recessive genotype, titilelers2rs2, with low KTI protein, lectin protein, and stachyose contents. Three parents (Gaechuck#2, PI200508, and 14G20) were used to develop the breeding population. The presence or absence of the lectin and KTI proteins was detected by western blotting. The stachyose content in mature seeds was determined by HPLC. Agronomic traits, such as plant type, plant height, maturity date, lodging, seed quality, and 100-seed weight, were evaluated for the four $F_3$ plant strains. One $F_4$ plant strain with the desired agronomical traits was selected. One new strain with the triple recessive titilelers2rs2 genotype was developed. The plant height of the new strain was 51 cm and the 100-seed weight was 31.0 g. The new strain had a yellow seed coat and yellow hilum. The stachyose content of the new strain was 3.8 g/kg. One strain developed in this research will be used to produce improved yellow soybean cultivars that are free of lectin and KTI proteins and low in stachyose content.

• Journal of Construction Engineering and Project Management
• /
• v.8 no.4
• /
• pp.1-24
• /
• 2018

In the last decade, the use of Building Information Modeling (BIM) as a new technology has been applied with traditional Computer-aided design implementations in an increasing number of architecture, engineering, and construction projects and applications. Its employment alongside construction management, can be a valuable tool in helping move these activities and projects forward in a more efficient and time-effective manner. The traditional stakeholders, i.e., Owner, A/E and the Contractor are involved in this BIM system that is used in almost every activity of construction projects, such as design, cost estimate and scheduling. This article extracts major features of the application of BIM from perspective of participating BIM components, along with the different phrases, and applies to them a logistic analysis using a fuzzy performance tree, quantifying these phrases to judge the effectiveness of the BIM techniques employed. That is to say, these fuzzy performance trees with fuzzy logic concepts can properly translate the linguistic rating into numeric expressions, and are thus employed in evaluating the influence of BIM applications as a mathematical process. The rotational fuzzy models are used to represent the membership functions of the performance values and their corresponding weights. Illustrations of the use of this fuzzy BIM performance tree are presented in the study for the uninitiated users. The results of these processes are an evaluation of BIM project performance as highly positive. The quantification of the performance ratings for the individual factors is a significant contributor to this assessment, capable of parsing vernacular language into numerical data for a more accurate and precise use in performance analysis. It is hoped that fuzzy performance trees and fuzzy set analysis can be used as a tool for the quality and risk analysis for other construction techniques in the future. Baldwin's rotational models are used to represent the membership functions of the fuzzy sets. Three scenarios are presented using fuzzy MEAN, AND and OR gates from the lowest to intermediate levels of the tree, and fuzzy SUM gate to relate the intermediate level to the top component of the tree, i.e., BIM application final performance. The use of fuzzy MEAN for lower levels and fuzzy SUM gates to reach the top level suggests the most realistic and accurate results. The methodology (fuzzy performance tree) described in this paper is appropriate to implement in today's construction industry when limited objective data is presented and it is heavily relied on experts' subjective judgment.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.4
• /
• pp.56-68
• /
• 2019

An optimal selection of form-work is very important in the construction project in terms of construction cost and duration management. Also, it substantially affects the quality of the structure and the finishing work. However, in South Korea, the decision making on the selection of form-work has been based on the experience and intuition of construction practitioners not on the objective data or rational decision-making system. In order to solve the problem, several types of research on the selection of form-work has been processed. However, they did not consider the construction site condition, which is one of the most important factors for the selection of form-work. Thus, the objective of this study is developing the objective decision supporting system considering the site condition. This study provides the quantitative decision support model for optimal form-work based on construction site type. It is expected that the decision support model will help the practitioners decide optimal form-work based on the objective data. It will ameliorate the existing decision making process using experience and intuition. In addition, because the model considers site-conditions, it will provide more accurate and appropriate decision on the selection of an optimal form-work.

• Journal of Korean Society on Water Environment
• /
• v.35 no.4
• /
• pp.316-331
• /
• 2019

Carbon dioxide($CO_2$) emission from rivers to the atmosphere is a key component in the global carbon cycle. Most of the rivers are supersaturated with $CO_2$. At a global scale, the amount of $CO_2$ emission from rivers is reported to be five-fold greater than that from lakes and reservoirs, but relevant data are rare in Korea. The objectives of this study is to estimate the $CO_2$ net atmospheric flux(NAF) from the upstream of Gangjeong-Goryeong Weir(GGW), Dalseong Weir(DSW), Hapcheon-Changnyeong Weir(HCW), and Changnyeong-Haman Weir(CHW) located in Nakdong River South Korea) using field and laboratory experiments and to apply data mining techniques to develop parsimonious prediction models that can be used to estimate $CO_2$ NAF with physical and water quality variables that can be collected easily. As a result, the study sites were all heterotrophic systems that often released $CO_2$ to the atmosphere, except when the algal photosynthesis was active.The median $CO_2$ NAF was minimum $391.5mg-CO_2/m^2$ day at GGW and maximum $1472.7mg-CO_2/m^2$ day at DSW. The $CO_2$ NAF showed a negative correlation with pH and Chl-a since the overgrowth of the algae consumed $CO_2$ in the water and increased the pH. As the parsimonious multiple regression model and random forest model developed, this study showed an excellent performance with the $Adj.R^2$ value higher than 0.77 in all weirs. Thus, these methods can be used to estimate $CO_2$ NAF in the river even if there is no $pCO_2$ measurement data.

• The Journal of the Korea Contents Association
• /
• v.18 no.12
• /
• pp.595-610
• /
• 2018

It is becoming common that the lack of child care due to changes in social structure and family function should be serviced at society and at the national level. Interest in child care services in child care facilities also increased. The purpose of this study is to examine the effect of organizational culture on child care respect for young children's rights that is needed to improve the quality of child care services. The questionnaire was administered to 340 day care teachers working in day care facilities and statistical analysis was performed using SPSS 22.0 statistical program. An analysis of the impact of organizational culture on child care among infants and toddlers showed that development culture, rational culture, collective culture, and hierarchical culture, which are sub-factors of organizational culture, have statistically significant on day -to-day respect, and child- first interests. The degree of influence was shown in the order of development culture, hierarchical culture, and rational culture. In particular, the influence of group culture is very low, which has been proven to differ depending on the type of organizational culture. These results show that the organizational culture of child care facilities affects child care respect for young children's rights. In the end, we suggested the theoretical and practical implications of this study, presented limitations and future research directions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.96-102
• /
• 2019

This study proposes basic information to make effective environments for social welfare education, revealing the reasons why students choose the social welfare major at Konyang Cyber University. We conducted qualitative research with 41 students in the social welfare department at Konyang Cyber University. The result of this research is as follows. First, most students chose their major to get a certificate that can benefit them in the near future. Second, they chose their major as a way to achieve renown, and to enhance the quality of their lives. Third, they desired to contribute to society through their social work. Finally, individual experiences and family background were also motives. Based on the research, to improve learning outcomes in social welfare education, the necessary learning strategies are as follows. First, goal-oriented learning is necessary for students who want to get the certificate. A practical curriculum needs to contain both practical skills and professional knowledge applicable to the social work field. Second, education for students who choose the major to gain fame, and to develop their lives, requires generation-integrated education to help them review their lives and find their own meaning in life. Third, education for students who choose the major for a practical social contribution has to contain volunteer training that can lead them to be professional volunteers in society. Fourth, education for students who choose the major based on their personal experiences and their family background needs to deal with case management, which discovers the recipients who need help in society and the students who can achieve visible outcomes after all.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.304-312
• /
• 2019

Service companies are making constant efforts to gain positive business performance such as customer satisfaction, quality improvement, and valuable management. Compared to other industries, service companies are highly dependent on workers for responding to customers and satisfying various customer needs in terms of business content and type. Thus, the attitude, given, environment, and capacity of the workers who supply service and serve customers are important factors that directly and indirectly influence customer satisfaction and performance. To enhance the performance of organizations and gain competitive advantage, it is important to provide the various forms of social support for workers as service suppliers. In this sense, active interests including the development of personal competence, support for working environment, and providing chances for the development of new services are significant. This study is a follow-up study on the influence of social support for positive psychological capital, creativity, and work performance of service workers. Among the service process matrix, this study targets the workers involved in mass service fields and seeks to examine how support for co-worker influences the performance through self-efficacy. No empirical analysis has examined workers involved in mass service fields. Thus, this study aims to take an approach different from that of previous studies and to suggest more effective human resource management strategies for enhancing the competitiveness of service companies and provide related implications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.35-42
• /
• 2019

Nut fasteners that require ultra-precise control are required in the overall manufacturing industry including electronic products that are currently developing with the automobile industry. Important performance factors when tightening nuts include loosening due to insufficient fastening force, breakage due to excessive fastening, Tightening torque and angle are required to maintain and improve the assembling quality and ensure the life of the product. Nut fasteners, which are now marketed under the name Nut Runner, require high torque and precision torque control, precision angle control, and high speed operation for increased production, and are required for sophisticated torque control dedicated to high output BLDC motors and nut fasteners. It is demanded to develop a high-precision torque control driver and a high-speed, low-speed, high-response precision speed control system, but it does not satisfy the high precision, high torque and high speed operation characteristics required by customers. Therefore, in this paper, we propose a control technique of BLDC motor variable speed control and nut runner based on vector control and torque control based on coordinate transformation of d axis and q axis that can realize low vibration and low noise even at accurate tightening torque and high speed rotation. The performance results were analyzed to confirm that the proposed control satisfies the nut runner performance. In addition, it is confirmed that the pattern is programmed by One-Stage operation clamping method and it is tightened to the target torque exactly after 10,000 [rpm] high speed operation. The problem of tightening torque detection by torque ripple is also solved by using disturbance observer Respectively.

• 한국노년학
• /
• v.36 no.3
• /
• pp.581-594
• /
• 2016

This study aims to observe the effect of age friendliness of cities on life satisfaction and to suggest ways to improve quality of life of older people. The secondary data sets were used in this study, which were '2014 Survey of Living Conditions and Welfare Needs of Korean Older People.' It's a nationwide data collected by the Korean Institute of Health and Social Affairs. A multilevel analysis model was used to analyze the data because the level of age friendliness has a hierarchical data structure. Results showed as follows: First, life satisfaction of older adults is affected by the level of age-friendliness of cities in which they live. Second, on the personal level, older people showed low life satisfaction when they are more older and have more chronic diseases and more depressed. On the contrary, life satisfaction of older adults increased when they have higher education and income. Third, on the city level, older people showed higher life satisfaction when they live in high employment rate area and participation rate of lifelong education. Cautions should be placed when interpret the result because the variables that represent the characteristics of age friendless of cities were constituted arbitrary. Based on the results, suggestions for improving the city environment age-friendly and implications for social welfare practice were provided.