• 인터넷정보학회논문지
• /
• 제22권2호
• /
• pp.51-58
• /
• 2021

가상 현실 공간에서 실사 영상 및 그래픽 환경에 대해 사용자 움직임에 대응하는 영상을 제공하는 three degrees of freedom plus(3DoF+) 및 six degrees of freedom(6DoF) 시스템은 실감형 미디어를 제공하기 위해 서로 다른 위치에서 동시에 취득된 다수의 초고화질 및 고해상도의 영상 집합 전송을 요구한다. 다수의 영상들을 사용해 사용자 시점 영상을 생성할 때, 기존의 영상 압축 코덱에서 발생했던 것과는 다른 형태의 품질 저하가 발생하여 기존의 영상 품질 평가 기법들은 3DoF+ 및 6DoF 시스템 평가에 적합하지 않다. 본 논문은 3DoF+ 환경에서 합성된 사용자 시점 영상에 대한 다양한 객관적 영상 품질 평가 기법에 대한 성능 평가를 소개한다. 또한, 기존의 객관적 영상 품질 평가 기법을 조합하여 주관적인 평가와 상관관계를 더욱 높인 평가 기법인 슈퍼 메트릭(super metric)을 제시한다. 3DoF+ 몰입형 비디오 평가 시 제안한 기법을 사용하였을 때, 주관적 평가 점수와의 상관관계에서 peak signal-to-noise ratio(PSNR) 대비 0.4513의 상승이 있었음을 확인하였다.

• 한국도로학회논문집
• /
• 제17권1호
• /
• pp.51-58
• /
• 2015

PURPOSES : The objective of this study is to compare the densities of asphalt pavements measured both in the field and in the laboratory, and also to evaluate the applicability of field density measuring equipment, such as the pavement quality indicator (PQI), by using statistical analysis. METHODS : For the statistical analysis of the density measured from asphalt pavement, student t-tests and a coefficient of correlation are investigated. In order to compare the measured densities, two test sections are prepared, with a base layer and an intermediate layer constructed. Each test section consists of 9 smaller sections. During construction, the field densities are measured for both layers (base and intermediate) in each section. Core samples are extracted from similar regions in each section, and moved to the laboratory for density measurements. All the measured densities from both the field and laboratory observations are analyzed using the selected statistical analysis methods. RESULTS AND CONCLUSION : Based on an analysis of measured densities, analysis using a correlation coefficient is found to be more accurate than analysis using a student t-test. The correlation coefficient (R) between the field density and the core density is found to be very low with a confidence interval less than 0.5. This may be the result of inappropriate calibration of the measuring equipment. Additionally, the correlation coefficient for the base layer is higher than for the intermediate layer. Finally, we observe that prior to using the density measuring equipment in the field, a calibration process should be performed to ensure the reliability of measured field densities.

• Journal of Welding and Joining
• /
• 제4권2호
• /
• pp.47-52
• /
• 1986

Friction Welds are formed by the mechanisms of diffusion as well as mechanical inter-locking. The severe plastic flow at the interface by the forge action of the process brings the subsurface so close together that detection of any unbounded area becomes very difficult. No reliable method is available so fat to determine the weld quality nondestructively. The paper presents an attempt to determine weld strength quantitatively using the ultrasonic pulseecho method. The new approach calculates the coefficient of reflection based on measured amplitudes of the echoes. This coefficient provides a single quantitative measurement which involves both acoustic energy reflected at the welded interface as well as transmitted across the interface. As a result, it was known that the quantitative relationship between the coefficient and the weld strength (torsional strength) could be drawn.

• 한국멀티미디어학회논문지
• /
• 제2권2호
• /
• pp.137-144
• /
• 1999

오차확산법은 계조화상을 이진화상으로 재현하는 것이 우수하지만 이진화상에 상관패턴이 생긴다. 본 논문에서는 오차확산계수의 주파수 분석을 통해서 상관패턴을 제거하고 경계를 강조하는 새로운 오차확산계수를 제안한다. 주목화소의 앞줄은 경계를 강조하도록 확산계수를 정하고 주목화소의 앞화소의 확산계수를 계수들이 대칭이 되도록 정한다. 그리고 제안하는 오차확산계수는 1,2로 구성되어 있기 때문에 계산량이 작다. 실험을 통해서 제안하는 확산계수를 이용한 이진화상의 화질이 기존의 확산계수를 이용한 이진화상보다 우수한 것을 보인다.

• Journal of information and communication convergence engineering
• /
• 제10권1호
• /
• pp.45-52
• /
• 2012

Thedenoising of a natural image corrupted by Gaussian noise is a long established problem in signal or image processing. Today the research is focus on the wavelet domain, especially using the wavelet threshold method. In this paper, a waveletbased image denoising modified adaptive thresholding method is proposed. The proposed method computes thethreshold adaptively based on the scale level and adaptively estimates wavelet coefficients by using a modified thresholding function that considers the dependency between the parent coefficient and child coefficient and the soft thresholding function at different scales. Experimental results show that the proposed method provides high peak signal-to-noise ratio results and preserves the detailed information of the original image well, resulting in a superior quality image.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.672-677
• /
• 2004

This paper is on determination method of preconsolidation pressure and consolidation coefficient using Kores University Calibration Chamber System(KUCCS). High-quality, large-size cohesive soil specimen was prepared by using two-stage slurry consolidation technique, which has many advantage for research and calibration purpose. The result from consolidation stage in KUCCS was compared with results of oedometer test. The results by Casagrcnde method gave very good agreement with preconsolidation pressure in slurry consolidometer. And, the predicted consolidation coefficient by log t method showed agreement with the experimental results in KUCCS.

• Journal of Magnetics
• /
• 제19권3호
• /
• pp.215-220
• /
• 2014

This study investigates the dynamic magneto-mechanical behavior of magnetization-graded ferromagnetic materials Terfenol-D/FeCuNbSiB (MF). We measure the dynamic magneto-mechanical properties as a function of the DC bias magnetic field ($H_{dc}$). Our experimental results show that these dynamic magneto-mechanical properties are strongly dependent on the DC bias magnetic field. Furthermore, the dynamic strain coefficient, electromechanical resonance frequency, Young's moduli, and mechanical quality factor of Terfenol-D/FeCuNbSiB are greater than those of Terfenol-D under a lower DC bias magnetic field. The dynamic strain coefficient increases by a factor of between one and three, under the same DC bias magnetic field. In particular, the dynamic strain coefficient of Terfenol-D/FeCuNbSiB at zero bias achieves 48.6 nm/A, which is about 3.05 times larger than that of Terfenol-D. These good performances indicate that magnetization-graded ferromagnetic materials show promise for application in magnetic sensors.

• 대한기계학회논문집B
• /
• 제33권1호
• /
• pp.17-27
• /
• 2009

Water jet impingement cooling is used to remove heat from high-temperature surfaces such as hot steel plates in the steel manufacturing process (thermo-mechanical cooling process; TMCP). In those processes, uniform cooling is the most critical factor to ensure high strength steel and good quality. In this study, experiments are performed to measure the heat transfer coefficient together with the inverse heat conduction problem (IHCP) analysis for a plate cooled by planar water jet. In the inverse heat transfer analysis, spatial and temporal variations of heat transfer coefficient, with no information regarding its functional form, are determined by employing the conjugate gradient method with an adjoint problem. To estimate the two dimensional distribution of heat transfer coefficient and heat flux for planar waterjet cooling, eight thermo-couple are installed inside the plate. The results show that heat transfer coefficient is approximately uniform in the span-wise direction in the early stage of cooling. In the later stage where the forced-convection effect is important, the heat transfer coefficient becomes larger in the edge region. The surface temperature vs. heat flux characteristics are also investigated for the entire boiling regimes. In addition, the heat transfer rate for the two different plate geometries are compared at the same Reynolds number.

• 설비공학논문집
• /
• 제7권2호
• /
• pp.225-233
• /
• 1995

Experiments were performed to investigate the heat transfer characteristics of nonazeotropic mixture R-22+R-114 in a heat pump system. The ranges of parameter, such as heat flux, mass flow rate, and quality were $8,141{\sim}32,564W/m^2$, 24~58kg/h, and 0~1, respectively. The overall compositions of the mixtures were 50 and 100 per-cent of R-22 by weight for R-22+R-114 mixture. The results indicated that there were distinct different heat transfer phenomena between the pure substance and the mixture. In case of pure refrigerant the heat transfer rates for cooling were strongly dependent upon quality of the refrigerant. Overall evaporating heat transfer coefficients for the mixture were somewhat lower than pure R-22 values in the forced convective boiling region. For a given flow rate, the heat transfer coefficient at the circumferential tube wall(top, side, and bottom of the test tube) for R-22/R-114(50/50wt%)mixture, however, was higher than for pure R-22 at side and bottom of the tube. Furthermore, a prediction for the evaporating heat transfer coefficient of the mixtures was developed based on the method of Yoshida et.al.'s. The resulting correlation yielded a good agreement with the data for the refrigerant mixtures.

• 벤처창업연구
• /
• 제5권4호
• /
• pp.95-111
• /
• 2010

현대의 기업 경쟁력은 경쟁력 있는 신제품 개발이 필수적이다. 기업이 지속적인 성장을 하기 위해서는 신제품을 개발해야 한다. 본 논문에서는 제품 설계의 고객의 목소리를 충분히 반영한 제품을 제안하였다. 1차 설계에서 Kano의 매력 품질특성을 반영하여 설계하였고, 2차 설계에선 Kano 품질 특성에서 일원적 품질특성이 Timko가 제안한 고객만족지수 방법을 통하여 찾아진 고객 요구를 만족하는가를 분석하였다. 또한 Kano의 매력품질을 찾는 기법과 Timko의 고객만족지수를 찾는 기법을 신제품 개발에 적용하면 매우 효과적으로 문제를 해결할 수 있다.