• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.836-839
• /
• 1997

In recent years, much progress has been made in the automation of welding coped with a variety of highly flexible sensors. Among these sensors, only the eddy current sensor can detect the center location of the butt joint whose gap distance is zero. Thus, in this study the eddy current sensor is used to develop a robust and useful joint tracking system. The developed system is tested to qualify the performance of the system and seam tracking algorithm is proposed and two simulation are executed to show the performance of the proposed tracking algorithm.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.451
• /
• pp.46-58
• /
• 2014

At the end of 2013, there were 434 nuclear power reactors in operation worldwide, with a total capacity of 371.6 GW(e), approximately 80 % had been in service 20 years and more. Many Member States have given high priority to licensing their nuclear power plants to operate for terms longer than the time frame originally anticipated(e.g. 30 or 40 years). One of challenges for long term operation is cable ageing management. How can qualify the existing cable under harsh environment in nuclear power plant? The paper described the approaches on qualification, condition monitoring, and management of low voltage cables in nuclear power plant.

• Proceedings of the IEEK Conference
• /
• 2001.06c
• /
• pp.101-104
• /
• 2001

Over the last few years, streaming audio and video content on Internet sites has increased at unprecedented rates. The predominant method of delivering video over the current Internet is video streaming such as SureStream or Intelligent Stream. Since each method provides the client with only one data stream from one server, it often suffers from poor qualify of pictures in the case of network link congestion. In this paper, we propose a novel method of delivering video stream based on wavelet to a client by utilizing multi-threaded parallel connections from the client to multiple servers and to provides a better way to address the scalability functionalities. The experimental results show that the video quality delivered by the proposed multithreaded stream could significantly be improved over the conventional single video stream methods.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2529-2532
• /
• 2003

The quality of agricultural products is represented a degree of freshness and a special qualify that has a close relation to commercial value. To grade tomatoes, it used to nondestructive equipment of a charge-coupled device(CCD) camera and near-infrared(NIR) spectrum analysis method. The NIR spectrum analysis method is used to determine internal qualities such as a brix and an acidity. The CCD camera is used to measure external qualities like color and a size of tomatoes. This paper explaines the structure and movement of the automatic grade system and applies the algorithm for deformed tomtatoes and characteristics of tomatoes through image processing to the grade system.

• Advances in aircraft and spacecraft science
• /
• v.5 no.2
• /
• pp.187-204
• /
• 2018

The sine sweep base excitation test campaign is a major milestone in the process of mechanical qualification of space structures. The objectives of these vibration tests are to qualify the specimen with respect to the dynamic environment induced by the launcher and to demonstrate that the spacecraft FE model is sufficiently well correlated with the test specimen. Dynamic qualification constraints lead to performing base excitation sine tests using a sine sweep over a prescribed frequency range such that at each frequency the response levels at all accelerometers, load cells and strain gages is the same as the steady state response. However, in practice steady state conditions are not always satisfied. If the sweep rate is too high the response levels will be affected by the presence of transients which in turn will have a direct effect on the estimation of modal parameters. A study funded by ESA and AIRBUS D&S was recently carried out in order to investigate the influence of sine sweep rates in actual test conditions. This paper presents the results of this study along with recommendations concerning the choice of methods.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.113-116
• /
• 2003

Hem quality can be determined mainly by turn-down and roll-in. Turn-down, that is created by the elastic recovery, can't be easily detected and measured since it is usually as small as 0.03 m. This study is focused on the precise evaluation of the hemming defects through analytical and experimetal approaches, and on the investigation of the influence of process parameters on the final hem quality. Implicit finite element analysis of plane-strain hemming process is performed by using a commercial code ABAQUS/Standard. Experiment and measurement is also carried out for steel and aluminium sheet metals, and the results are compared with those of analysis.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.1-8
• /
• 2002

At present, company has to produce a product that consumer like with a competitive price, a good quality, and a fitting time to supply. Process control and qualify control are very important to supply with a product uniformly and inexpensively In this paper, the characteristic of product quality is monitored by control chart during the machining process and construction of quality control cycle is considered to divide into two types in this case that different assignable causes lead to shifts having different magnitudes. Then we are intended to find a process shift magnitude which has economical quality cost policy and are considered to quality cost functions to find a process shift magnitude. Those costs are categorized into the well-known categories of prevention, appraisal, and internal failure and external failure. This paper ends with numerical examples that demonstrate the usefulness of the model.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.439-444
• /
• 2002

Competitive power in manufacturing industries mainly depends on production time and qualify of products. The main issue for achieving this goal is to build high speed and super accuracy machine. The machine has been developed in the aspect of hardware. However, applications in high speed machining is not sufficient to give solutions to industries in machining. This research presents a method to improve surface roughness adopting experimental design. This research finds experimental factors which have great impact on surface roughness. From the experiments cutting conditions are found for better quality of machining.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.10 no.2
• /
• pp.27-40
• /
• 2006

WiBro will speed up Ubiquitous era that will have positive effects in our economy such as increase in general production, consumer spending, general export, service qualify, and employment rate. Considering the fact that Wibro is currently commercialized in only few selected countries, Korea has advantage in standardizing technology, accumulating the related know-how, producing domestic parts, and technology marketing experience. I believe developing Wibro technology in Korea will deliver a significant amount of contribution to the future IT technology.

• Journal of Information Technology Applications and Management
• /
• v.11 no.2
• /
• pp.167-178
• /
• 2004

Different from traditional development methodologies like waterfall model, the CBD (component based development) methodology relies on a building block approach in the design and development of information system. The audit procedure and checklist for the traditional IS development methodology are required to be modified to be suitable for CBD. This research reviewed IS audit guidelines for the existing development process and analyzed multiple projects that employed the by component based development process. For the purpose of this study, we chose a governmental project and a next-generation IS project of a financial agency as sample cases. By comparing existing IS audit checklists and items actually reviewed in audit projects, this study identified appropriate check items for the CBD-centric audit program. New items were proposed as additional items such as project control in management phase, usage case and conceptual model establishment, component evaluation and design, in implementation phase, and so forth. The result of the research provides new guidelines for the audit CBD projects for the purposed of increased efficiency and qualify of application development projects.