• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.8
• /
• pp.44-49
• /
• 2003

In case of an extrinsic Fabry-Perot interferometric sensor, the phase compensating technique is particularly necessary in applying the interferometer to detecting acoustic emission signals because of signal-fading problems. The technique makes it possible to maintain the phase at the quadrature point. In this paper, we developed the stabilization control sensor system that is composed of a broadband light source, a tunable Fabry-Perot (F-P) filter and a control-circuit board. A tension test of a composite specimen was performed to verify if the developed system could compensate the phase change induced from the tension strain and keep the phase at the quadrature point.

• Journal of the Korean Magnetic Resonance Society
• /
• v.7 no.1
• /
• pp.25-36
• /
• 2003

The performance of radio frequency (RF) coils, used in MRI units, is determined by the image uniformity and the signal-to-noise ratio (SNR). Birdcage and surface coils are commonly used. A birdcage coil provides a good image uniformity while a surface coil produces a high SNR. In this study, therefore, a staircase coil was designed from a standard version of a birdcage coil, with some structural changes to increase SNR while maintaining image uniformity. In phantom experiments, the improvement of the image to uniformity and the SNR increase of the staircase coil compared with the values for the birdcage coil were about 3.5% and 35%, respectively. In clinical experiment, the SNR increase of the staircase coil, compared with the value for the birdcage coil was about 40% in bone, muscle and blood-vessel tissues. These results show that the performance of the staircase coil was very improved over the standard birdcage coil in terms of SNR, and that image uniformity was maintained. Therefore, the staircase coil designed by this study should be useful in experimental and clinical l.5T MRI systems, and this coil offers an alternative method of quadrature detection.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.9
• /
• pp.171-178
• /
• 2001

The nonlinearity of a laser interferometer usually ranges from sub-nanometer to several manometers. This nonlinearity, which has periodic characteristics, limits the accuracy of the interferometer at the sub-nanometer level. The nonlinearity error of the one-frequency homodyne interferometer with quadrature fringe detection results from a number of factors including polarization mixing by imperfect optical elements, unequal gain of photo detectors, lack of quadrature between two signals and misalignment. In this paper, we described a method for measuring and compensating the nonlinearity of homodyne interferometer using the elliptical fitting technique with least-square method. Experimental results demonstrate that $^\pm$3.5 nm nonlinearity can be reduced to $^\pm$0.2 nm level.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.363-364
• /
• 2002

We describe quadrature type surface coil for functional magnetic resonance imaging at 3T MRI system. The coil consisted of two coplanar resonators and was used as both transmitter and receiver. The signal-to-noise ratio (SNR) of the coil was compared with that of a standard birdcage head coil. Visual cortex activation on normal subjects using LED flicker was performed. The SNR of surface coil was found to be better than that of the conventional head coil.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.22-26
• /
• 2003

EFPI (extrinsic Fabry-Perot interferometer) 센서를 이용해 복합재료의 파손 신호를 취득하기 위해서는 파손 신호에 비해 상대적으로 낮은 주파수의 열적, 기계적 정적 변형에 의해 발생하는 위상 변화를 보상해 주는 기술이 필요하다. 또한 센서의 민감도를 최적화하기 위해 출력 신호의 위상을 Quadrature 지점에 유지시켜야 한다. 본 논문에서는 EFPI 센서 시스템의 출력 신호위상을 일정하게 유지시킬 수 있는 안정화 제어 시스템을 개발하였다. 안정화 제어 시스템은 광대역 파장 레이저 광원, 가변 F-P (Fabry-Perot) 필터 그리고 필터를 제어한 수 있는 전자 회로시스템으로 구성하였다. 개발된 시스템의 위상 제어 성능을 평가하기 위해 복합재료 시편의 인장 실험을 수행하여 인장 변형에 의해 발생하는 위상 변화를 개발된 시스템을 이용해 Quadrature 지점에 일정하게 유지할 수 있음을 보였다. 또한 연필심 파손 실험을 통해 개발된 시스템이 파손 신호를 잘 취득할 수 있음을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.3
• /
• pp.9-17
• /
• 2000

In this paper we implement computer simulation system of 4FSK signal MODEM using Quadrature detector and analyze overall tranceiver system. We follow the FLEX wireless paging system standards and construct premodulation filter and data frame. We propose an efficient open loop symbol timing recovery algorithm which takes advantage of 128 bit length preamble pattern and also propose a 32 bit UW pattern which Is based on the optimal UW detection method, and excellent aperiodic autocorrelation characteristic. The BER simulation in the fading channel as well as AWGN is performed with BCH coding and Interleaving to the Quadrature detector system and it is shown that a high coding fain occurs in the fading channel rather than AWGN channel.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.105-110
• /
• 2015

This paper presents a $4{\times}1$ beam-forming reader antenna system for a new type of RFID based train position detection technology. The required beamwidth of the reader antenna is analytically expressed for different train speeds. The proposed antenna system consists of four rectangular patch elements and two switching couplers which are designed, without any impedance matching networks, for two different antenna modes. The switching coupler is a rectangular quadrature coupler with Pin diodes connecting its center line and the ground plane. The beamwidth of the antenna when the diodes are off and on is $18^{\circ}$ and $39^{\circ}$, respectively. The proposed antenna system will be used for a real train test in the near future.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.159-162
• /
• 2002

We introduce a simple optically passive detection scheme for Bragg grating sensors. This detection scheme is based on two cavity lengths in Fabry-Perot read-out interferometers to produce two quadrature phase shifted signals from the Bragg grating sensor. The passive detection technique is demonstrated by the use of Bragg grating sensors in measuring the dynamic vibrations of the composites.

• Journal of the Optical Society of Korea
• /
• v.20 no.2
• /
• pp.223-227
• /
• 2016

The impact of optical receiver configuration on in-band crosstalk-induced penalty has been investigated in both theoretical and experimental analyses, for differential phase-shift keying (DPSK) and differential quadrature phase-shift keying (DQPSK) signals. Previously it has been shown that DPSK signals are ~6 dB more tolerant to in-band crosstalk than on-off keying (OOK) signals. However, we find that the tolerance difference between the two signals is reduced to ~3 dB when the decision threshold of the receiver is optimized to minimize the bit-error rate for each signal. Then we derive simple equations for the in-band crosstalk-induced penalty in DPSK and DQPSK signals with two different optical receiver configurations: balanced and single-ended direct-detection receivers. We confirm that the penalties obtained from our simple equations agree well with the measured results.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.892-899
• /
• 2012

We analyze a wideband spectrum in a cognitive radio (CR) network by employing the optimal adaptive multiband sensing-time joint detection framework. This framework detects a wideband M-ary quadrature amplitude modulation (M-QAM) primary signal over multiple nonoverlapping narrowband Gaussian channels, using the energy detection technique so as to maximize the throughput in CR networks while limiting interference with the primary network. The signal detection problem is formulated as an optimization problem to maximize the aggregate achievable secondary throughput capacity by jointly optimizing the sensing duration and individual detection thresholds under the overall interference imposed on the primary network. It is shown that the detection problems can be solved as convex optimization problems if certain practical constraints are applied. Simulation results show that the framework under consideration achieves much better performance for M-QAM than for binary phase-shift keying or any real modulation scheme.