• 한국해양학회지
• /
• v.29 no.2
• /
• pp.119-131
• /
• 1994

Vertical structures of wind-driven and tidal currents in a rectangular shaped uniform-depth basin of homogeneous water have been investigated using a mode-splitted, multi-level grid-box, hydrodynamic numerical model. The model was verified using analytical solutions for various vertical eddy viscosity profiles such as: a constant eddy viscosity, a linearly decreasing or increasing variation with depth, a quadratic variation with depth and an exponential variation with depth. Particular attention has been paid on the effects of "near-surface wall layer" on vertical shear of velocity. In numerical calculations, the whole water depth was divided into 13 levels with an unequal grid spacing. the model satisfactorily reproduces the velocity profile, but in case the eddy viscosity decreases rapidly with depth as in quadratical or exponential variation with depth, the vertical gradient of velocity near the bottom became very steep, and analytical solutions and numerical results showed some discrepancy. The vertical structures of horizontal velocity vary with both the depth-averaged value of eddy viscosity and its profiles. the velocity near the sea surface and near the bottom responded sensitively to the eddy viscosity of wall layer. For wind-driven current, the strong velocity shear was generated near the sea surface as eddy viscosity near the surface became small. For tidal current, the velocity above the sea bottom layer was almost constant regardless of the profiles of vertical eddy viscosity, but velocity in the sea bottom layer showed strong shear as eddy viscosity became small.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.6
• /
• pp.808-814
• /
• 2019

Objective: The objective of this study was to investigate the effects of essential oil mixture (EOM) supplementation on rumen fermentation characteristics and microbial changes in an in vitro. Methods: Three experimental treatments were used: control (CON, no additive), EOM 0.1 (supplementation of 1 g EOM/kg of substrate), and EOM 0.2 (supplementation of 2 g EOM/kg of substrate). An in vitro fermentation experiment was carried out using strained rumen fluid for 12 and 24 h incubation periods. At each time point, in vitro dry matter digestibility (IVDMD), neutral detergent fiber digestibility (IVNDFD), pH, ammonia nitrogen ($NH_3-N$), and volatile fatty acid (VFA) concentrations, and relative microbial diversity were estimated. Results: After 24 h incubation, treatments involving EOM supplementation led to significantly higher IVDMD (treatments and quadratic effect; p = 0.019 and 0.008) and IVNDFD (linear effect; p = 0.068) than did the CON treatment. The EOM 0.2 supplementation group had the highest $NH_3-N$ concentration (treatments; p = 0.032). Both EOM supplementations did not affect total VFA concentration and the proportion of individual VFAs; however, total VFA tended to increase in EOM supplementation groups, after 12 h incubation (linear; p = 0.071). Relative protozoa abundance significantly increased following EOM supplementation (treatments, p<0.001). Selenomonas ruminantium and Ruminococcus albus (treatments; p<0.001 and p = 0.005), abundance was higher in the EOM 0.1 treatment group than in CON. The abundance of Butyrivibrio fibrisolvens, fungi and Ruminococcus flavefaciens (treatments; p<0.001, p<0.001, and p = 0.005) was higher following EOM 0.2 treatment. Conclusion: The addition of newly developed EOM increased IVDMD, IVNDFD, and tended to increase total VFA indicating that it may be used as a feed additive to improve rumen fermentation by modulating rumen microbial communities. Further studies would be required to investigate the detailed metabolic mechanism underlying the effects of EOM supplementation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.1
• /
• pp.62-66
• /
• 1984

One row of pollen parent to two rows of seed parent (1:2), 2:4 and solid (1:2) planting patterns (PP) were compared in seed parent densities of 3,500, 5,000 and 6,500 plants per 10 ares to determine effects of PP and plant density on growths of seed and pollen plants, and seed yield of seed parent of modified single cross corn hybrid. Planting pattern did not significantly affect agronomic characteristics of seed plant except ear number per 100 plants and seed yield which were greater in solid and 1:2 PP than in 2:4 PP. Significant PP x plant density interaction did not exist for agronomic characteristics of seed parent. In the seed parent, plant height and 100 kernel weight were not affected by plant density, but ear height, ear number per 100 plants, and kernel number per ear were linearly decreased with increased plant densities. Seed yield ranged from 330 to 460 kg per 10 ares and overall yield response to plant density was quadratic. Tassel length and spikelet number per tassel of the pollen parent were significantly affected by PP and plant density. Significant PP x plant density interaction existed for tassel length and spikelet number per tassel. Tassel length and spikelet number per tassel were greater in 1:2 and 2:4 PP compared to solid PP and were greatly reduced with increased plant densities in solid and 1:2 PP. The results indicated that 1:2 or 2:4 PP at around 5,000 plants per 10 ares for seed parent would be suitable for seed production of modified single cross com hybrid.

• Animal Bioscience
• /
• v.37 no.6
• /
• pp.1053-1064
• /
• 2024

Objective: This study aims to investigate the interactive effect of a glycine equivalent (Gly_equi) and standardized ileal digestible threonine (SID Thr) levels in low crude protein diets on performance, blood biochemistry, pectoral muscular creatine content and oxidative stability of meat in broiler chickens from 21 to 42 days. Methods: A total of 1,500, twenty-one-day-old Cobb-Vantress male broiler chickens were distributed in a completely randomized 5×3 factorial arrangement of Gly_equi×SID Thr with five replicates of 20 birds each. Fifteen dietary treatments of 16.5% CP were formulated to contain five levels of total Gly_equi (1.16%, 1.26%, 1.36%, 1.46%, and 1.56%) and three levels of SID Thr (0.58%; 0.68% and 0.78%). Results: Interaction effects (p<0.05) of Gly_equi and SID Thr levels were observed for weight gain, carcass yield, pectoral muscular creatine content and serum uric acid. Higher levels of Gly_equi increased (p = 0.040) weight gain in 0.58% and 0.68% SID Thr diets compare to the 0.78% SID Thr diet. The SID Thr level at 0.68% improved (p = 0.040) feed conversion compared to other SID Thr diets. Levels of Gly_equi equal to or above 1.26% in diets with 0.78% SID Thr resulted in birds with higher (p = 0.033) pectoral muscular creatine content. The breast meat yield observed in the 0.68% SID Thr diet was higher (p = 0.05) compared to the 0.58% SID Thr diet. There was a quadratic effect of Gly_equi levels for pectoral pectoral muscular creatine content (p = 0.008), breast meat yield (p = 0.030), and serum total protein concentrations (p = 0.040), and the optimal levels were estimated to be 1.47%, 1.35%, and 1.40% Gly_equi, respectively. The lowest (p = 0.050) concentration of malondialdehyde in the breast meat was found in 0.68% SID Thr diets at 1.36% Gly_equi. Conclusion: The minimum dietary level of Gly_equi needed to improve performance in low crude protein diets is 1.26% with adequate SID Thr levels for broiler chickens.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1584-1592
• /
• 2000

Three hundred nursery pigs were used in two growth assays (avg initial BW of 6.5 and 6.0 kg, respectively) to determine the effects of sodium sulfite ($Na_2SO_3$) as an extrusion aid for soy products used in diets for weanling pigs. In Exp. 1, treatments were arranged as $3{\times}2$ factorial with main effects of soy product [soybean meal (SBM), extruded SBM, and dry-extruded whole soybeans (DEWS)] and concentration of $Na_2SO_3$ (0 and 10 g/kg of soy product). The extruded SBM and DEWS treatments were processed in a dry extruder ($Insta-Pro^{(R)} $, Triple F Nutrition, Des Moines, IA) with barrel temperatures and throughputs of $169^{\circ}C$ and 578 kg/h, and $147^{\circ}C$ and 598 kg/h, respectively. All diets were formulated to 3.5 Mcal/kg DE, with 0.92% lysine for d 0 to 14, and 0.76% lysine for d 14 to 28. For d 0 to 14, there was a tendency for pigs fed diets with $Na_2SO_3$ to have greater ADG (p<0.08), and pigs fed SBM to have greater ADFI (p<0.02), thus pigs fed the extruded soy products has 15% greater gain/feed than those fed SBM (p<0.007). For d 14 to 28, there were no differences in ADG or gain/feed among pigs fed diets with SBM and those fed diets with the extruded soy products (p>0.15). However, pigs fed DEWS had greater ADG than pigs fed extruded SBM, and pigs fed $Na_2SO_3$ had greater ADG and ADFI compared to those not fed $Na_2SO_3$ (p<0.02 and 0.08, respectively). The positive response in ADG and gain/feed to the addition of $Na_2SO_3$ resulted with SBM and extruded SBM treatments, and not with DEWS (interaction effect, p<0.04). Overall (d 0 to 28), pigs fed DEWS had greater ADG (p<0.01) and gain/feed (p<0.08) than pigs fed extruded SBM. Also pigs fed diets with $Na_2SO_3$ had greater ADG, ADFI, and gain/feed compared to those fed diets without $Na_2SO_3$ (p<0.002, 0.04, and 0.04, respectively). Exp. 2 was designed as a $2{\times}3$ factorial with main effects of soy product (SBM and DEWS) and concentration of $Na_2SO_3$ (none, 7.5, and 15.0 g/kg of soy product). As in Exp. 1, all diets were formulated to 3.5 Mcal/kg DE, with 0.92% lysine for d 0 to 13, and 0.76% lysine for d 13 to 53. At a constant processing temperature (148 to $149^{\circ}C$, $Na_2SO_3$ increased throughput of the extruder (578, 595, and 602 kg/h for the 0, 7.5, and 15.0 g/kg additions, respectively). For d 0 to 13, treatment had no effect on ADG or ADFI, but gain/feed decreased for pigs fed SBM with increasing concentrations of $Na_2SO_3$, and increased for pigs fed DEWS with increasing concentrations of $Na_2SO_3$ (SBM vs DEWS sulfite quadratic interaction, p<0.03). For d 13 to 35, pigs fed DEWS had greater ADG (p<0.01) and gain/feed (p<0.001) than pigs fed SBM. Also, ADFI decreased and gain/feed increased with increasing concentrations of $Na_2SO_3$ (linear effects, p<0.04 and 0.01, respectively). Overall, pigs fed the diets with DEWS had greater ADG and gain/feed than pigs fed SBM (p<0.003 and 0.002, respectively), and $Na_2SO_3$ tended to decrease ADFI and increase gain/feed (linear effects, p<0.07 and 0.06, respectively). In conclusion, pigs fed DEWS had greater rate and efficiency of gain than pigs fed SBM. Also, adding $Na_2SO_3$ prior to extrusion increased yield and feed efficiency.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.7
• /
• pp.965-973
• /
• 2014

Three studies were conducted to investigate whether a chelated Cu can replace $CuSO_4$ as a growth promoter in pigs. In Exp. 1, a total of 240 piglets (Large White${\times}$Landrace, $7.36{\pm}0.10kg$) were randomly allocated to 1 of 3 treatments with 8 replicates and 10 piglets per pen. Treatments included a NRC control ($CuSO_4$, 6 mg/kg), two Cu supplementations from either $CuSO_4$ or $Cu(HMTBa)_2$ at 170 mg/kg. Pigs fed $Cu(HMTBa)_2$ were 6.0% heavier than pigs fed either the NRC control or 170 mg/kg $CuSO_4$ (p = 0.03) at the end of the experiment. During the 42 days of experimental period, pigs fed $Cu(HMTBa)_2$ gained 9.0% more (p = 0.01), tended to eat more feed (p = 0.09), and had better feed efficiency (p = 0.06) than those fed $CuSO_4$. Compared with the 6 mg/kg $CuSO_4$ NRC control, liver Cu was increased 2.7 times with 170 mg/kg $CuSO_4$ supplementation, and was further increased with $Cu(HMTBa)_2$ (4.5 times, p<0.05). In Exp. 2, a total of 616 crossbred piglets (PIC, $5.01{\pm}0.25kg$) were randomly allocated to 1 of 4 treatments with 7 replicates and 22 piglets per pen. Treatments included a NRC control (from $CuSO_4$), and three pharmaceutical levels of Cu (150 mg/kg) supplemented either from C$CuSO_4$, tri-basic copper chloride ($Cu_2[OH]_3C1$), or $Cu(HMTBa)_2$. Pigs fed $CuSO_4$ or $Cu(HMTBa)_2$ had better feed efficiency (p = 0.01) and tended to gain more (p = 0.08) compared with those fed the NRC control. Pigs fed $Cu_2[OH]_2C1$ were intermediate. Pigs fed $Cu(HMTBa)_2$ had the highest liver Cu, which was significantly higher than those fed ($Cu_2[OH]_3C1$) or the negative control (p = 0.01). In Exp. 3, a total of 1,048 pigs (PIC, $32.36{\pm}0.29kg$) were allotted to 6 treatments with 8 replicates per treatment and 20 to 22 pigs per pen. The treatments included a NRC control with 4 mg/kg Cu from $CuSO_4$, a positive control with 160 mg/kg Cu from $CuSO_4$, and incremental levels of $Cu(HMTBa)_2$ at 20, 40, 80, and 160 mg/kg. During the overall experimental period of 100 days, no benefit from 160 mg/kg $CuSO_4$ was observed. Pigs fed $Cu(HMTBa)_2$ had increased ADG (linear and quadratic, $p{\leq}0.05$) and feed efficiency (linear and quadratic, $p{\leq}0.05$) up to 80 mg/kg and no further improvement was observed at 160 mg/kg for the whole experimental period. Pigs fed 80 mg/kg $Cu(HMTBa)_2$ weighed 1.8 kg more (p = 0.07) and were 2.3 kg heavier in carcass (p<0.01) compared with pigs fed 160 mg/kg $CuSO_4$. In addition, loin depth was increased with increased $Cu(HMTBa)_2$ supplementation with pigs fed 80 mg/kg $Cu(HMTBa)_2$ had the greatest loin depth (p<0.05). In summary, $Cu(HMTBa)_2$ can be used to replace high $CuSO_4$ as a growth promoter in nursery and grower-finisher pigs.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.565-572
• /
• 2005

An experiment was conducted to determine the effect of supplementation of insoluble dietary fiber (Vitacel®) on growth performance and nutrient digestibility in weanling pigs. A total of 96 pigs that averaged 6.49$\pm$0.52kg BW and 23$\pm$2.1d age were allocated in a randomized block design with two pigs per pen and 12 pens per treatment. Pigs and feeders were weighed 10-days interval for the 40-d trials to determine ADG, ADFI and feed:gain ratio(F:G). Pigs were fed one of four diets:1) Control diet (C) 2) C+0.3% insoluble dietary fiber(IDF) 3) C+0.6% IDF and 4) c+0.9% IDF. For the determination of fecal nutrients digestibility, pigs were fed diets(diet 2) with 1% Celite-545(Fluka) as a marker and feces were collected on $9^{th}$ day and $18^{th}$ day after feeding diet 2. During the whole experimental period, pigs fed diet with 0.3% IDF have significantly higher ADG than other dietary treatment groups(P<0.05). ADG of pigs fed diet with 0.6% IDF was higher than that of pigs fed control diet(P<0.05). However, there was no significant difference in ADG between control group and 0.9% IDF group(P>0.05). ADFI of pigs fed diet with 0.3% IDF was significantly higher than any other dietary treatment groups(P<0.05). There was no significant difference in ADFI among control group, 0.6% and 0.9% IDF supplementation groups (P>0.05). Digestibilities of organic matter, crude protein, crude fiber and energy were significantly higher in 0.3% IDF supplementation group than any other dietary groups. However, there was no difference in over all nutrient digestibilities between 0.6% and 0.9% IDF group. Feeding diets more than 0.6% IDF did not affect the rest of the nutrients digestibilities except for ADF digestibility compared to control diet. Dietary supplementation level of IDF showed a significant quadratic effect on performance improvement of piglets. This response of growth performance to IDF supplementation is, as expected, in agreement with that of nutrient digestibility. Our results showed that IDF supplementation to diet for weaned piglets might be beneficial in terms of growth and nutrient digestibility. However, there should be more study on the relationship between level of IDF supplementation and piglet response as well as the exact mode of action of IDF in weaned piglets.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.1
• /
• pp.70-77
• /
• 2016

The object of this study was to evaluate the effects of climatic elements on potato yield and create a model for estimating the potato yield. We used 35 yield data of Sumi variety produced in mulching cultivation from 17 regions over 11 years. According to the results, some climatic elements showed significant level of correlation coefficient with marketable yield of potato. Totally 22 items of climatic elements appeared to be significant. Especially precipitation for 20 days after planting (Prec_1 & 2), relative humidity during 11~20 days after planting (RH_2), precipitation for 20 days before harvest (Prec_9 & 10), sunshine hours during 50~41 days before harvest (SH_6) and 20 days before harvest (SH_9 & 10), and days of rain during 10 days before harvest (DR_10) were highly significant in quadratic regression analysis. 22 items of predicted yield ($Y_i=aX_i{^2}+bX_i+c$) were induced from the 22 items of climatic elements (step 1). The correlations between the predicted yields and marketable yield were stepwised using SPSS, statistical program, and we selected a model (step 2), in which 4 items of independent variables ($Y_i$) were used. Subsequently the $Y_i$ were replaced with the equation in step 1, $aX_i{^2}+bX_i+c$. Finally we derived the model to predict the marketable yield of potato as below. $$Y=-336{\times}DR_-10^2+854{\times}DR_-10-0.422{\times}Prec_-9^2+43.3{\times}Prec_-9\\-0.0414{\times}RH_-2^2+46.2{\times}RH_-2-0.0102{\times}Prec_-2^2-7.00{\times}Prec_-2-10039$$.

• Korean Journal of Plant Resources
• /
• v.25 no.1
• /
• pp.132-141
• /
• 2012

This study was carried out to test seed germination responses to temperatures and pre-treatments in Hippophae rhamnoides, which has many abilities in antioxidant activity, soil improvement and erosion control. H. rhamnoides seeds were placed at 10, 15, 20, 25, 30 and $35^{\circ}C$ under light condition. As the results, germination percentage (GP) was the highest at 15 and $20^{\circ}C$, and mean germination time (MGT), germination rate (GR) and germination value (GV) were the highest at $25^{\circ}C$. Quadratic and linear regression model were used to determine the cardinal temperatures such as base ($T_b$), maximum ($T_m$) and optimum ($T_o$) temperature for germination. In quadratic regression model using PG, $T_b$, $T_m$ and $T_o$ was estimated as 0.6, 36.4 and $18.5^{\circ}C$, respectively, and temperature range for germination was $35.8^{\circ}C$. In linear regression model using GR, $T_b$, $T_m$ and $T_o$ was estimated as 8.3, 35.4 and $25.3^{\circ}C$, respectively, and temperature range for germination was $27.2^{\circ}C$. Germination properties were investigated after H. rhamnoides seeds were treated by prechilling (1, 2, 4, 6 and 8 weeks), stratification (2, 4, 6 and 8 weeks), solid matrix priming (seed : carrier : water = 5 : 1 : 7, 8, 9 and 10), osmo-priming (-0.25, -0.5, -1.0 and -1.5 MPa) and calcium chloride ($CaCl_2$) -priming (100, 200, 300 and 400 mM). The highest GP was observed in $CaCl_2$ 300 and 400 mM treatments, and MGT was the shortest in stratification 6 and 8 weeks treatments. GR and GV were the highest and GP was the second highest when seeds were prechilled for 1 and 2 weeks. Consequently, prechilling 1 or 2 weeks treatment was considered as the appropriate method when we contemplate qualitative and quantitative effects in seedling production.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.25 no.4
• /
• pp.81-96
• /
• 2020

Berthlot's reaction spectrophotometric method is generally used for the analysis of dissolved ammonium in seawater, but in recent years, a fluorescence method using an orthophthaldialdehyde-sulfite (OPA) fluorescent reagent is actively used internationally. In this study, we investigated the effects of the detection limit between the analysis methods, the reagent refractive index inherent in the spectrophotometric method, and the use of different calibration curves to understand the cause of the difference in dissolved ammonium concentration (about 0.31 𝜇M) observed in the seawater samples and a nutrient reference material between two institutions (KIOST (spectrophotometric method, one-order linear regression gradient only), Australia CSIRO (fluorescence method, quadratic formula)) conducted onboard the Australian R/V Investigator in 2017. The method detection limit (0.063 𝜇M) and the reagent refractive index background value (0.054 𝜇M) of the spectrophotometric method measured in this study could explain the difference in dissolved ammonium concentration values of the two institutes about 20% and 17%, respectively. However, when the concentration of the calibration curve of the spectrophotometric method was calculated using the same quadratic as the fluorescence method or the slope and intercept of linear regression, the difference in the dissolved ammonium concentration between the two institutions was reduced to less than the detection limit of the spectrophotometric method. Therefore, the difference in the concentration of dissolved ammonium between the two institutions, found in the nutrient reference materials and the seawater field sample during the international onboard nutrient inter-comparison experiment, may be attributed to be the effect of the different calibration curves used in the two methods rather than the effect of the difference in two analytical methods. When comparing the dissolved ammonium data from seawater samples in the future, it is recommended to pay attention to the information on the baseline, number of standard solutions, and calibration curve used in the analysis.