• The Korean Journal of Applied Statistics
• /
• v.10 no.1
• /
• pp.177-187
• /
• 1997

This article considers the power performance of the tests in unbalanced two way mixed linear models with one fixed factor. The generalized least squares (GLS) F statistic testing no differences among the effects of the levels of the fixed factor is estimated using Henderson's method III, minimum norm quadratic unbiased estimator (MINQUE) with prior guess 1, maximum likelihood (ML) and resticted maximum likelihood (REML). We investigate the power performance of these test statistics. It can be shown, through simulation, that the GLS F statistics using four estimators produce similar type I error rates and power performance.

• Mass Spectrometry Letters
• /
• v.9 no.3
• /
• pp.77-80
• /
• 2018

The focus of this paper is to present techniques to overcome certain difficulties in quantitative analysis with a time-of-flight mass spectrometer (TOF-MS). The method is based on conventional solid-phase extraction, followed by reversed-phase ultra high performance liquid chromatography of the extract, and mass spectrometric analysis. The target compounds included atenolol, atrazine, caffeine, carbamazepine, diclofenac, estrone, ibuprofen, naproxen, simazine, sucralose, sulfamethoxazole, and triclosan. The matrix effects caused by high concentrations of organic compounds in wastewater are especially significant in electrospray ionization mass spectroscopy. Internal-standard calibration with isotopically labeled standards corrects the results for many matrix effects, but some peculiarities were observed. The problems encountered in quantitation of carbamazepine and triclosan, due to nonlinear calibration were solved by changing the internal standard and using a narrower mass window. With simazine, the use of a quadratic calibration curve was the best solution.

• Journal of Powder Materials
• /
• v.13 no.6 s.59
• /
• pp.445-449
• /
• 2006

The experimental data from the central composite design runs were utilized for mathematical models far the drilling characteristics containing linear, quadratic and interactive effects of the parameters such as volume fraction of TiC in the composites, drill speed, feed rate and drill diameter. The models were developed via stepwise selection where the insignificant effects were removed using t-test. The models were subjected to optimization of maximizing drill life and satisfying the other constraints.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.10a
• /
• pp.24-27
• /
• 1997

In the present work, rigid-plastic continuum elements employing the shape change and anisotropic effects are derived for the purpose of applying more realistic blankholding force condition in three-dimensional finite element analysis of sheet metal forming process. In order to incorporate the effect of shape change effectively in the derivation of finite element equation using continuum element for sheet metal forming, the convected coordinate system is introduced, rendering the analysis more rigorous and accurate. The formulation is extended to cover the orthotropic material using Hill's quadratic yield function. For the purpose of applying more realistic blankholding force condition, distributed normal and associated frictional tangent forces are employed in the blankholder, which is pressed normal and associated frictional tangent forces are employed in the blankholder, which is pressed against the flange until the resultant contact force with the blank reaches the prescribed value. As an example of sheet metal forming process coupling the effect of planar anisotropy and that of blankholding boundary condition, circular cup deep drawing has been analyzed considering both effects together.

• Steel and Composite Structures
• /
• v.25 no.1
• /
• pp.67-78
• /
• 2017

In this study, free vibration of functionally graded (FG) micro/nanobeams based on nonlocal third-order shear deformation theory and under different boundary conditions is investigated by applying the differential quadrature method. Third-order shear deformation theory can consider the both small-scale effects and quadratic variation of shear strain and hence shear stress along the FG nanobeam thickness. The governing equations are obtained by using the Hamilton's principle, based on third-order shear deformation beam theory. The differential quadrature (DQ) method is used to discretize the model and attain the natural frequencies and mode shapes. The properties of FG micro/nanobeam are assumed to be chanfged along the thickness direction based on the simple power law distribution. The effects of various parameters such as the nonlocal parameter, gradient index, boundary conditions and mode number on the vibration characteristics of FG micro/nanobeams are discussed in detail.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.1
• /
• pp.42-50
• /
• 2017

Objective: Two trials were conducted in order to examine the effects of level of supplemental methionine on productive performance, dietary energetic, plasma amino acid concentration, and digestive function. Methods: Dietary treatments consisted of a steam-flaked corn-based diet containing urea as the only source of supplemental nitrogen supplemented with no supplemental amino acid (control), or control plus 1.01% lysine and 0.032%, 0.064%, 0.096%, or 0.128% methionine. In Trial 1, 150 Holstein steer calves ($127{\pm}4.9kg$) were utilized to evaluate the influence of treatments on growth-performance, dietary energetic, plasma amino acid concentration during the first 112 days of growing period. During the initial 56-d period calves received the 5 experimental diets. During the subsequent 56-d period all calves were fed the control diet. Results: During the initial 56-d period, methionine supplementation increased (linear effect, p<0.01) plasma methionine. In the presence of supplemental lysine, increases on level of methionine in diet did not affect average daily gain. However, increased gain efficiency (quadratic effect, p = 0.03) and estimated dietary net energy (NE; linear effect, p = 0.05). Estimated metabolizable methionine supply was closely associated ($R^2=0.95$) with efficiency NE utilization for maintenance and gain. During the subsequent 56-d period, when all calves received the control diet (no amino acid supplementation), plasma amino acid concentrations and growth performance was not different among groups. However, the effects of methionine supplementation during the initial 56-period carried over, so that following a 56-d withdrawal of supplementation, the overall 112-d effects on gain efficiency (quadratic effect, p = 0.05) dietary NE (linear effect, $p{\leq}0.05$) remained appreciable. In Trial 2, 5 cannulated Holstein steers were used to evaluate treatment effects on characteristics of digestion and amino acid supply to the small intestine. There were no treatment effects on flow of dietary and microbial N to the small intestine. Postruminal N digestion increased (p = 0.04) with increasing level of supplemental methionine. Methionine supplementation linearly increased (p<0.01) duodenal flow of methionine. Likewise, lysine supplementation increased an average of 4.6% (p = 0.04) duodenal flow of lysine. In steers that received non-supplemented diet, observed intestinal amino acid supply were in good agreement with expected. Conclusion: We conclude that addition of rumen-protected methionine and lysine to diets may enhance gain efficiency and dietary energetics of growing Holstein calves. Observed amino acid supply to the small intestine were in good agreement with expected, supportive of NRC (2000, Level 1).

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.15 no.4
• /
• pp.3147-3152
• /
• 1973

The factors to influence the travelling distance of sprayed particles for the medium range nozzle may by the groove depth of swirl plate, the cap slope, the diameter of cap hole, and pressure. 1. This study was conducted to examine Interaction effects among four factors to the travelling distance. The results of this study are summarized as followa; a) Interaction effects among four factors the groove depth(G), cap slope(C), diameter of cap hole(D), and pressure (P), were significant to influence the travelling distance except for $G{\times}P,\;C{\times}D{\times}P\;and\;G{\times}C{\times}D{\times}P$. b) Interaction effects with the pressure were very smaller than interaction effects among the other factors. c) Effect of change of the groove depth of swirl plate on the travelling distance of sprayed particles was generally a linear, the increasing rate of the change was about 0.345, which was very significant. d) Effect of change of cap slope on the travelling distance was generally a linear or a dull quadratic, the increasing rate was very small. e) Main effect of change of cap slope in the medium range nozzle was very smaller than that of the close range nozzle on the travelling distance, which was estimated by the changing of turning radius of flowing course in nozzle. f) Interaction effect between two factors in the medium range nozzle was more significant than that of the close range nozzle on the travelling distance.

• Journal of Korea Planning Association
• /
• v.54 no.3
• /
• pp.15-26
• /
• 2019

The development of science and transportation technology leads to the increase of inter - city networks that play an important role in urban growth. Overall, numerous studies based on network theory pay attention to positive effects of urban network on urban growth. However, some studies have pointed out the negative effects of inter-city interactions such as straw effects. This implies that the network between cities may not be positively correlated with urban growth, and that the direction of the influence may vary from a certain threshold, such as the marginal utility curve. In this context, the purpose of this study is to measure the impacts of network with central city on urban growth in the capital region and examine the relationship between urban network and growth. Two multiple regression models are employed with changes in population and employment as dependent variables. The urban network index and other control variables are used as independent variables. Especially, the urban network indexes are used in quadratic forms to examine non linear relations with urban growth such U-shape or an inverted U-shape. The results show that the relationships between networks with the central city and urban growth are not a simple linear, and the influence can be changed from the critical point.

• Geomechanics and Engineering
• /
• v.14 no.2
• /
• pp.161-174
• /
• 2018

The present study investigates the soil-structure interaction (SSI) effects on the seismic performance of smart base-isolated structures. The adopted control algorithm for tuning the control force plays a key role in successful implementation of such structures; however, in most studied carried out in the literature, these algorithms are designed without considering the SSI effect. Considering the SSI effects, a linear quadratic regulator (LQR) controller is employed to seismic control of a smart base-isolated structure. A particle swarm optimization (PSO) algorithm is used to tune the gain matrix of the controller in both cases without and with SSI effects. In order to conduct a parametric study, three types of soil, three well-known earthquakes and a vast range of period of the superstructure are considered for assessment the SSI effects on seismic control process of the smart-base isolated structure. The adopted controller is able to make a significant reduction in base displacement. However, any attempt to decrease the maximum base displacement results in slight increasing in superstructure accelerations. The maximum and RMS base displacements of the smart base-isolated structures in the case of considering SSI effects are more than the corresponding responses in the case of ignoring SSI effects. Overall, it is also observed that the maximum and RMS base displacements of the structure are increased by increasing the natural period of the superstructure. Furthermore, it can be concluded that the maximum and RMS superstructure accelerations are significant influenced by the frequency content of earthquake excitations and the natural frequency of the superstructure. The results show that the design of the controller is very influenced by the SSI effects. In addition, the simulation results demonstrate that the ignoring the SSI effect provides an unfavorable control system, which may lead to decline in the seismic performance of the smart-base isolated structure including the SSI effects.

• Journal of Animal Science and Technology
• /
• v.61 no.6
• /
• pp.305-312
• /
• 2019

This study was carried out to investigate the effects of dietary energy levels on growth performance, blood parameter, and intestinal morphology of Pekin ducks in low temperature. A total of 500, 21-d-old Pekin ducks (initial BW = 1,089 ± 5.21 g) were evenly assigned to five dietary treatments (2,950, 3,000, 3,050, 3,100, or 3,150 kcal AME/kg, calculated on an as-is basis) with four replicates (pens) for each treatment (25 ducks per pen). During the experiment, hens were provided with feed and water ad libitum. Overall, increasing dietary energy levels corresponded to an increase of final body weight and body weight gain (linear, p < 0.01). Feed intake decreased (linear, p < 0.01) and feed conversion ratio increased (linear, p < 0.01) with increasing levels of energy. There were no significant differences (p < 0.05) in the level of leukocytes between groups. However, heterophils decreased (quadratic, p < 0.05) and lymphocytes increased (linear, p < 0.01) as inclusion of dietary energy levels increased. The H/L ratio increased (linear, p < 0.01) with increasing dietary energy levels while serum corticosterone levels decreased at overall experimental periods. Triglycerides increased (linear and quadratic, p < 0.05) with increasing dietary energy levels. There were no significant changes in villus height or crypt depth of the jejunum at overall experimental. In conclusion, increasing concentrations of dietary energy levels up to 2,950-3,150 kcal/kg in diet. Additionally, 3,150 kcal/kg dietary energy had been revealed more beneficial and could be practiced as protective management for the Pekin ducks reared under low ambient temperature (8℃ to 10℃).