• Journal of Power Electronics
• /
• v.10 no.5
• /
• pp.548-554
• /
• 2010

In this paper, a 1.5 kW Interior Permanent Magnet Synchronous Generator (IPMSG) with a power conditioner for the grid integration of a variable-speed wind turbine is developed. The power-conditioning system consists of a series-type 12-pulse diode rectifier powered by a phase shifting transformer and then cascaded to a PWM voltage source inverter. The PWM inverter is utilized to supply sinusoidal currents to the utility line by controlling the active and reactive current components in the q-d rotating reference frame. While the q-axis active current of the PWM inverter is regulated to follow an optimized active current reference so as to track the maximum power of the wind turbine. The d-axis reactive current can be adjusted to control the reactive power and voltage. In order to track the maximum power of the wind turbine, the optimal active current reference is determined by using a simple MPPT algorithm which requires only three sensors. Moreover, the phase angle of the utility voltage is detected using a simple electronic circuit consisting of both a zero-crossing voltage detecting circuit and a counter circuit employed with a crystal oscillator. At the generator terminals, a passive filter is designed not only to decrease the harmonic voltages and currents observed at the terminals of the IPMSG but also to improve the generator efficiency. The laboratory results indicate that the losses in the IPMSG can be effectively reduced by setting a passive filter at the generator terminals.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.6
• /
• pp.897-905
• /
• 2003

Phospholipase D (PLD) and ADP-ribosylation factor (ARF) were partially purified on a series of column chromatography, and their biochemical properties were characterized to understand the regulatory mechanism of PLD activation by ARF protein in the antigen-induced immune responses in guinea pigs. Heparin Sepharose and high-Q Sepharose column chromatographies were used for the purification of PLD, and Sephadex G-25, DEAE Sephacel, Source 15 PHE (HIC), Superdex-75, and Uno-Q column chromatographies were used for the purification of ARF. The purified PLD and ARF proteins were identified with anti-rabbit PLD- or ARF-specific antibodies, showing about 64 or 85 kDa for the molecular mass of PLD and 29 or 35 kDa for the sizes of ARF. Partial cDNA of ARF3 was cloned by RT-PCR in guinea pig lung tissue and its nucleotides and amino acids were sequenced. Guinea pig ARF3 showed 92% of nucleotides sequence identity and 100% of amino acid sequence homology with human ARF3. The ARF-regulated PLD activity was measured in the oleate or ARFs-containing mixed lipid vesicles. The purified and recombinant ARF (rARF) activities were assessed with the $GTP{\gamma}S$ binding assay. The PLD activity was induced by oleate in a dose-dependent manner. The purified ARF and recombinant ARF3 increased PLD activity in guinea pig lung tissues. These data show that the activity of membrane-bound PLD can be regulated by the cytosolic ARF proteins, suggesting that ARF proteins in guinea pig lung can act as a regulatory factor in controlling the PLD activity in allergic reaction.

• The Korean Journal of Quaternary Research
• /
• v.19 no.2
• /
• pp.74-79
• /
• 2005

Recently, several attempts have been made to provide reasonable information on unusual severe weather phenomena such as tolerant heavy rains and very wild typhoons. Quantitative precipitation forecasts and probabilistic quantitative precipitation forecasts (QPFs and PQPFs, respectively) might be one of the most promising methodologies for early warning on the flesh floods because those diagnostic precipitation models require less computational resources than fine-mesh full-dynamics non-hydrostatic mesoscale model. The diagnostic rainfall model used in this study is the named QPM(Quantitative Precipitation Model), which calculates the rainfall by considering the effect of small-scale topography which is not treated in the mesoscale model. We examine the capability of probabilistic diagnostic rainfall model in terms of how well represented the observed several rainfall events and what is the most optimistic resolution of the mesoscale model in which diagnostic rainfall model is nested. Also, we examine the integration time to provide reasonable fine-mesh rainfall information. When we apply this QPM directly to 27 km mesh meso-scale model (called as M27-Q3), it takes about 15 min. while it takes about 87 min. to get the same resolution precipitation information with full dynamic downscaling method (called M27-9-3). The quality of precipitation forecast by M27-Q3 is quite comparable with the results of M27-9-3 with reasonable threshold value for precipitation. Based on a series of examination we may conclude that the proosed QPM has a capability to provide fine-mesh rainfall information in terms of time and accuracy compared to full dynamical fine-mesh meso-scale model.

• Archives of Plastic Surgery
• /
• v.44 no.2
• /
• pp.150-156
• /
• 2017

Background Digital amputation is a common upper extremity injury and can cause significant impairment in hand function, as well as psychosocial stigma. Currently, the gold standard for the reconstruction of such injuries involves autologous reconstruction. However, when this or other autologous options are not available, prosthetic reconstruction can provide a functionally and aesthetically viable alternative. This study describes a novel technique, known as a tripod titanium mini-plate, for osseointegrated digit prostheses, and reviews the outcomes in a set of consecutive patients. Methods A retrospective review of patients who underwent 2-stage prosthetic reconstruction of digit amputations was performed. Demographic information, occupation, mechanism of injury, number of amputated fingers, and level of amputation were reviewed. Functional and aesthetic outcomes were assessed using the quick disabilities of the arm, shoulder, and hand (Q-DASH) scale and a visual analog scale (VAS) score, respectively. In addition, complications during the postoperative period were recorded. Results Seven patients were included in this study. Their average age was 29 years. Five patients had single-digit amputations and 2 patients had multiple-digit amputations. Functional and aesthetic outcomes were assessed using the Q-DASH score (average, 10.4) and VAS score (average, 9.1), respectively. One episode of mild cellulitis was seen at 24 months of follow-up. However, it was treated successfully with oral antibiotics. No other complications were reported. Conclusions When autologous reconstruction is not suitable for digit reconstruction, prosthetic osseointegrated reconstruction can provide good aesthetic and functional results. However, larger series with longer-term follow-up are required in order to rule out the possibility of other complications.

• Journal of Korean Society for Quality Management
• /
• v.40 no.3
• /
• pp.245-258
• /
• 2012

Purpose: Recently, many quality issues are aroused in military forces, such as failures in K-series weapons, combat boots defects and 40mm ammunition explosion accident. To address these problems, the one and only government defense quality assurance agency, DTaQ(Defense Agency for Technology & Quality) tried to improve many quality assurance procedures and introduced new systems such as MRA(Manufacturing Readiness Assessment), TRA(Technology Readiness Assessment), and etc. However, as the amount of war supplies increasing every year, the resource(budget and manpower) for quality assurance is limited. Therefore, DTaQ had difficulty to handle the issue efficiently and effectively, and we propose the method to address this problem. Methods: The most popular quality assurance technique is a sampling method, in this research, we first review the many sampling techniques and compare the strength and weakness of each method. After then, we selected the most appropriate sampling techniques and applied the procedures in combat force support material and ammunition areas. Results: We can reduce the number of samples dramatically, thus the required amount of labor time and money can be saved. Also, the new sampling technique enforces the supplier to produce the product which meets the target value(desirable value). Conclusion: We can reduce the number of samples dramatically, thus the required amount of labor time and money can be saved. Also, the new sampling technique enforces the supplier to produce the product which meets the target value(desirable value). Lastly, since the new sampling method requires many numerical calculations, we developed a simple android OS smart-phone application which can be used easily in field.

• Investigative Magnetic Resonance Imaging
• /
• v.14 no.1
• /
• pp.74-77
• /
• 2010

Granulocytic sarcoma is a manifestation of myelogenous leukemia, which means a solid mass consisting of primitive precursors of the granulocytic series of white blood cells. We present CT and MR imaging findings of bilateral sino-orbital granulocytic sarcoma in a 22-month-old boy. The mass involved bilateral orbital fossa which resulted in bilateral proptosis. Moreover, the mass extended to the almost skull base including paranasal sinuses, maxilla, temporal bone, zygomatic bone, sphenoid bone, ethmoid, and palatine bone. The adjacent dura was continuously thickened and the lower half of cavernous sinus was also involved. The patient was diagnosed as AML (M5) with t(8,21) translocation through a chromosome study from the bone marrow.

• Smart Structures and Systems
• /
• v.18 no.1
• /
• pp.53-74
• /
• 2016

This paper presents an experimental study on constructing a tunable secondary suspension for high-speed trains using magneto-rheological fluid dampers (referred to as MR dampers hereafter), in the interest of improving lateral ride comfort. Two types of MR dampers (type-A and type-B) with different control ranges are designed and fabricated. The developed dampers are incorporated into a secondary suspension of a full-scale high-speed train carriage for rolling-vibration tests. The integrated rail vehicle runs at a series of speeds from 40 to 380 km/h and with different current inputs to the MR dampers. The dynamic performance of the two suspension systems and the ride comfort rating of the rail vehicle are evaluated using the accelerations measured during the tests. In this way, the effectiveness of the developed MR dampers for attenuating vibration is assessed. The type-A MR dampers function like a stiffness component, rather than an energy dissipative device, during the tests with different running speeds. While, the type-B MR dampers exhibit significant damping and high current input to the dampers may adversely affect the ride comfort. As part of an ongoing investigation on devising an effective MR secondary suspension for lateral vibration suppression, this preliminary study provides an insight into dynamic behavior of high-speed train secondary suspensions and unique full-scale experimental data for optimal design of MR dampers suitable for high-speed rail applications.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.3
• /
• pp.199-205
• /
• 2010

The structure-activity relationships (SARs) between a series of phenyl-2,2'-methylenebis(cyclohexane-1,3-dione) analogues (1-22) as substrate molecules and their inhibitory activity against tyrosinase were studied quantitatively using molecular hologram quantitative structure-activity relationships (HQSARs). Based on the results, new compounds with the increased tyrosinase inhibitory activity were designed. In addition, statistically favored E-2 model ($q_2$ = 0.564 & $r_2$ = 0.929) was derived. It is predicted that the activity of the most potent one (P1) of compounds newly designed by the optimized HQSAR E-2 model was $Pred.pI_{50}$ = 5.48 and the predicted inhibitory activity was about 13.4 fold higher than that of the kojic acid used as standard compound.

• Korean Journal of Microbiology
• /
• v.26 no.3
• /
• pp.197-206
• /
• 1988

An outer membrane-associated 2-furaldehyde dehydrogenase, catalyzing the oxidation of 2-furaldehyde to 2-furoic acid from Klebsiella pneumoniae was purified to homogeneity and characterized. The enzyme showed its highly specific dependency on $\beta$-$NAD^{+}$. Enzyme activity was monitored during purification by using substrate 2-furaldehyde and coenzyme $\beta$-$NAD^{+}$ by means of high performance liquid chromatography. The outer membrane was successfully collected by the methods of Percoll density gradient ultracentrifugation and ultracentrifugation after preferential solubilization of the membrane with $Mg^{2+}$ and Triton X-100. The enzyme was purified by the series of procedures including extraction of outer membrane protein with EDTA and lysozume, and fractionation by column chromatography on QAE-Sephades Q-50, and subsequently Sephadex G-100. The enzume showed its optimal activity at $85^{\circ}C$, pH 9.5, and in the presence of 1.5% (vol/vol) Triton X-100. The enzyme exhibited a native molecular size of 88,000 by nondenaturing polyacrylamide gel electrophoresis and had an apparent Km of 4.72mM for 2-furaldehyde.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.2
• /
• pp.83-89
• /
• 2012

Natural Vegetation cover, which is very important earth resource, has been significantly altered by humans in some manner. Since this has currently resulted in a significant effect on global climate, various studies on vegetation environment including forest have been performed and the results are utilized in policy decision making. Remotely sensed data can detect, identify and map vegetation cover change based on the analysis of spectral characteristics and thus are vigorously utilized for monitoring vegetation resources. Among various vegetation indices extracted from spectral reponses of remotely sensed data, NDVI is the most popular index which provides a measure of how much photosynthetically active vegetation is present in the scene. In this study, for change detection in vegetation cover, a Multi-layer Perceptron Network (MLPN) as a nonparametric approach has been designed and applied to MODIS/Aqua vegetation indices 16-day L3 global 250m SIN Grid(v005) (MYD13Q1) data. The feature vector for change detection is constructed with the direct NDVI diffenrence at a pixel as well as the differences in some subset of NDVI series data. The research covered 5 years (2006-20110) over Korean peninsular.