• Journal of Internet Computing and Services
• /
• v.2 no.3
• /
• pp.19-25
• /
• 2001

An educational system using computers was first conceptualized by Dr. Donald Bitzer in the University of Illinois in the late 1950s. Since the PLATO system was developed in 1961, multilateral research were made for the last 30 years. Especially, the development of Internet and Information Technology has contributed to the advancement of the distance education system. This system has greatly changed the existing educational paradigm, As the result, new education system is being realized, This study suggests a distance education system based on ‘push’ technique, which is a means of active information transmission, In this system, the ‘push’ technique is combined with the existing distance education system. Through the combination, learning contents can be provided for learners without connecting the DB on the Internet. In addition, the process of getting new information is real-timed operation. Also, the treatment of item; and the algorithm of level-based item evaluation are devised in consideration of various levels of learners, so that evaluation of items appropriate to the levels of learners can be accomplished.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.08a
• /
• pp.29-34
• /
• 2003

In order to study the shearing characteristics of anti-vibration sheet metal which has been bonded by resin, a blanking die of 40.02mm was manufactured to blank a material and it is used to reduce vibrational noise. The variables employed in this study were 1) Clearance 2) types of stripper plate, and 3) types of the die design technique. These variables were used to study the effects on burr height, diameter of product, and camber height. Lastly, the effect of the position of the rubber during blanking was observed. In the case of burr height from experimental investigation, the push-back die, combined with a movable stripper plate, resulted in the concentration of additional pressure between the cutting edges, meaning the crack initiation was delayed. This result was not affected by lubrication, although appropriate lubrication is preferred to enable a longer lasting die in terms of wear, which results from the presence of adhesive as the sheet metal is blanked. In the comparison of diameter measurement, the push-back die, combined with the back pressure from the knock-out plate showed a favorable precision. The use of the push back die with a fixed stripper plate, with a $4.5\%$ clearance, showed better accuracy in the diameter measurement. For comparing camber height, the push back die resulted in less cambering than the drop-through die. Also, the larger the clearance, the greater was the camber height. Considering experimental results, the shearing of anti-vibrational sheet metal is best achieved when the rubber is laying on the top, blanked with a fixed-stripper plate in a push-back die, with a $4.5\%$ clearance.

• Journal of The Korean Society of Integrative Medicine
• /
• v.4 no.2
• /
• pp.29-36
• /
• 2016

Purpose : The purpose of this study was to find out the effects on muscle activations of serratus anterior and upper trapezius muscles when push-up plus exercise togu applied differently depending on the body part. Method : Thirty six volunteers took part in this study and we divided into three groups(upper arm togu group 12, leg togu group 12, upper arm-leg togu group 12). Each experimental group performed push-up plus exercise. All volunteers received a total of 18 exercise session over a 6 week period (three times per week). Exercise program was composed of serratus anterior and upper trapezius push-up plus exercise. Then we measured muscle activation of scapular stabilizer by electromyography. Repeated ANOVA was used to examine the effects of the intervention on each outcome measure. Result : After the six week intervention, there was a significant difference between the pre and 6 week in serratus anterior and upper trapezius muscle activity(p<0.05). After the six week intervention, there was a significant difference among the three group in serratus anterior muscle activity but no significant difference in upper trapezius muscle activity(p>.05). Conclusion : Serratus anterior and upper trapezius showed high muscle activity during push-up plus exercise. Therefore have a positive impact of scapular stabilizer. The larger the area of the unstable support surface, the larger muscle activity was larger of variation quantity.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.4
• /
• pp.405-411
• /
• 2013

Objective: Product design process without considering the strength of the user can cause the excessive burden on musculoskeletal system of human body. Since the muscle strength will vary depending on the body posture, the design of product should consider the characteristics of body posture. This study was performed to investigate the effects of forearm postures on the push and pull strength. Background: Overexerted force has been identified to cause musculoskeletal disorders. It is important to know the push and pull strength exerted by human when designing so that exerted force does not exceed the safety limits. Method: Maximum isometric push and pull strength of left, right and both hands were measured according to forearm postures with pronation, neutral and supination. For the study, 66 male and 30 female undergraduate students were participated as subjects. All subjects were normal and healthy with no clinical history. Results: The results showed that the push strength of male and female were 93.3% and 85.4% of pull strength. It showed that the strength of one-hand was 72.1~81.0% of the strength of two-hands, and the strength of left hand was 93.1~95.8% of the strength of right hand. The strength of female was 62% of the one of male. It was found that the strength with pronation $90^{\circ}$ was reduced up to 20% compared to the strength with neutral posture. Conclusion: Push and pull strength of male and female were reduced when forearm was rotated extremely. Application: The results of this study will be used for the prevention of work related musculoskeletal disorders and design of industrial equipment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.3
• /
• pp.397-404
• /
• 2010

Recently, there is on-going research about tactical data link system based on the legacy radio. Tactical data link based on legacy radio is operated mostly in narrow bandwidth under 25khz. Communicating traffics in nodes participated at network need to be minimized for distributing tactical data in narrow bandwidth. In addition, the data distributing structure is necessary for distributing tactical informations such as a situation awareness and so on to war fighters. However, conventional server-client system wastes a lot of time to obtain information for war fighters as user uses pull system to gather necessary information by seeking it one by one. Especially, the fighter pilot is supposed to dedicate into a situation awareness and fight mission in every seconds but seeking information of a user terminal while aircraft maneuvering affects as obstacle to concentrate engaging hostiles. therefore, push technology, the tactical data distributing system, is necessary for war fighters to receive fixed tactical data automatically without putting attention to it. This paper propose the UMPC tactical data link push framework. the UMPC tactical data link is a tactical data link system based on the legacy radio. Proposed push framework is verified by composing experiment environment and testing.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.4
• /
• pp.385-394
• /
• 2006

The application areas of traditional push-pull converters are limited because the voltage stress of switches is high (twice of the input voltage). But the push - pull converter topology is suitable for unregulated low-voltage to high-voltage power conversion such as the fuel cell. This paper presents a novel power converter structure that is very suitable for the DC/DC converter in fuel cell systems. Based on this structure, a ZVS- ZCS push-pull converter is proposed. The switches of the proposed push-pull converter can operate under ZVS or ZCS condition with the help of a new passive clamping circuit. The passive clamping techniques solves the voltage overshoot problem. Because the buck converter circuit operates at twice the synchronous switching frequency of the push-pull converter, the peak current in the current-fed inductor and transformer is reduced. The operation principle of the proposed converter is analyzed and verified by simulations and experimental results. A 1 kW DC/DC converter was implemented with DSP TMS320F2812, from which experimental results have shown that efficiency improvement and surge suppression can be achieved effectively.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.2
• /
• pp.55-61
• /
• 2015

PURPOSE: The purpose of this study was to investigate recruiting order and onset time around shoulder muscle during the push-up according to the body tilting angle. METHODS: Twenty healthy young adult subjects were recruited for this study. They had no neurological and musculoskeletal disease. We used the sEMG for recording onset time of shoulder muscles. Shoulder Muscles were anterior deltoid(AD), posterior deltoid(PD), pectoralis major(PM), upper trapezius(UT). Body tilting angle were measured at 0 degree, 30 degree and 60 degree by using tilting table. Muscles contraction onset time were set by the push-up performed 3 times respectively. Mean of 3 measurements were used. And initiate onset time was decided by the Mean ${\pm}2$ SD in the threshold, more than 25ms. RESULTS: There were significant difference at 0 degree, 30 degree and 60 degree(p<.05). Muscles onset time were same order at 0 degree, 30 degree. UT occurred first of all contraction at 0 degree and 30 degree. And then contracted AD, PD, PM. But, at 60 degree, AD was the first contraction, and PM, UT, PD. CONCLUSION: Muscle recruitment order and onset time according to the body tilting was shown the difference when you do push-up. Therefore, this result, shoulder muscle recruitment pattern of according to the body tilting is different and it has to make effective shoulder exercise program.

• Restorative Dentistry and Endodontics
• /
• v.44 no.1
• /
• pp.5.1-5.9
• /
• 2019

Objectives: The aim of this in vitro study was to evaluate the push-out bond strength of a novel calcium silicate-based root repair material-BIOfactor MTA to root canal dentin in comparison with white MTA-Angelus (Angelus) and Biodentine (Septodont). Materials and Methods: The coronal parts of 12 central incisors were removed and the roots were embedded in acrylic resin blocks. Midroot dentin of each sample was horizontally sectioned into 1.1 mm slices and 3 slices were obtained from each root. Three canal-like standardized holes having 1 mm in diameter were created parallel to the root canal on each dentin slice with a diamond bur. The holes were filled with MTA-Angelus, Biodentine, or BIOfactor MTA. Wet gauze was placed over the specimens and samples were stored in an incubator at $37^{\circ}C$ for 7 days to allow complete setting. Then samples were subjected to the push-out test method using a universal test machine with the loading speed of 1 mm/min. Data was statistically analyzed using Friedman test and post hoc Wilcoxon signed rank test with Bonferroni correction. Results: There were no significant differences among the push-out bond strength values of MTA-Angelus, Biodentine, and BIOfactor MTA (p > 0.017). Most of the specimens exhibited cohesive failure in all groups, with the highest rate found in Biodentine group. Conclusions: Based on the results of this study, MTA-Angelus, Biodentine, and BIOfactor MTA showed similar resistances to the push-out testing.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.2
• /
• pp.39-47
• /
• 2019

Purpose : This study was investigated effects of vibration on scapular winging of knee push-up plus exercise. Methods : Twenty-eight female subjects with scapular winging were evaluated after performing knee push-up plus exercise, with or without vibration, three times a week for four weeks. Muscle activation of the serratus anterior and upper trapezius, and the ratio of activation of the upper trapezius to serratus anterior were measured using surface EMG; and scapular winging length was measured by using the caliper. Results : The findings showed that knee push-up plus exercise -with and without- vibration induced a significant increase in muscle activation of serratus anterior (p<.05) and a significant decrease in muscle activation of the upper trapezius (p<.05), the ratio of muscle activation of the upper trapezius to the serratus anterior (p<.05) and scapular winging length (p<.05). There was also a significant difference in muscle activation of the serratus anterior (p<.05) and upper trapezius (p<.05) between control and experimental group at post-test. Conclusion : This study suggests positive clinical effects of knee push-up plus exercise with vibration which enhanced muscle activation of serratus anterior and reduced muscle activation of upper trapezius in person with scapular winging. However, vibration had no effectiveness to improve muscle imbalance between serratus anterior and upper trapezius, and reduce the scapular winging length.

• Physical Therapy Korea
• /
• v.10 no.3
• /
• pp.29-40
• /
• 2003

The purpose of this study was to compare the muscle activity during a push-up on a suspension sling and a fixed support at the same level. Tests were performed on 15 male subjects. Electromyography using a surface EMG recorded the activity of the triceps, pectoralis major, and internal and external oblique muscles during each push-up. EMG activity was recorded at 0, 45, and 90 degrees of elbow flexion in the push-up position on a suspension sling or a fixed support at the same height above the floor (30 cm). The testing order was selected randomly. The subjects were asked to maintain the push-up position with straight knees, hips, and trunk for 5 seconds at each elbow angle. The mean root mean square (RMS) of EMG activity was calculated. EMG activity was normalized using the maximum voluntary isometric contractιn elicited using a manual muscle testing technique. Two-factor repeated measures analysis of variance (ANOVA) was used to compare the average RMS value of EMG activity for each condition. The EMG activity for the pectoralis major, and internal and external oblique muscles during a push-up on a sling was significantly higher than on a fixed support at all angles of elbow flexion (p<.01). There were significant differences in the EMG activity of the pectoralis major and triceps brachii muscles at difference angles of elbow flexion (p<.05). The pectoralis major muscle had the highest EMG activity at 90 degrees of elbow flexion on both the sling and fixed support. The triceps brachii muscle had the highest EMG activity at 45 degrees of elbow flexion on both the sling and fixed support. The internal and external oblique muscles had the highest EMG activity at 0 degrees of elbow flexion, although the difference with angle of flexion was not significant. These results suggest that to improve proximal and trunk stability and muscle strength, push-ups are more useful when performed on a suspension sling than On a fixed support.