• Resources Recycling
• /
• v.25 no.5
• /
• pp.75-83
• /
• 2016

AlN powder was prepared by carbon reduction and subsequent nitridation method through the scale-up experiments of 0.7 ~ 1.5 kg per batch. AlN powder was synthesized using the mixture of $Al_2O_3$ powder and carbon black at $1,550{\sim}1,750^{\circ}C$ for 0.5 ~ 4 hours under nitrogen atmosphere (flow rate of nitrogen gas: $10{\sim}40{\ell}/min$) at $2.0{\times}10^{-1}Torr$. Experimental results showed that $1,700{\sim}1,750^{\circ}C$ for the reaction temperature, 3 hr for reaction time, and $40{\ell}/min$ for the flow rate of nitrogen gas were the optimal conditions. Also, in order to remove carbon in the synthesized AlN, the remained carbon was removed at $650{\sim}750^{\circ}C$ for 1 ~ 2 hr using horizontal tube furnace. The results showed that 1 : 3.2 mol ratio of $Al_2O_3$ to carbon black, reaction temperature of $750^{\circ}C$, reaction time of 2 hours, rotating speed of 1.5 rpm under atmosphere condition were the optimal conditions. Under these conditions, high-purity AlN powder over 99% could be prepared: carbon and oxygen contents of the AlN powder were 835 ppm and 0.77%, respectively.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.27-36
• /
• 2018

Recently, the demand for new cultivar of oriental mustard(Brassica juncea) is increased as the consumption of oriental mustard has increased dramatically in the market due to Kimchi is attracting the world's attention. However, absence of seed supply system can cause many problems including inbreeding depression due to self seed production, deterioration of the seed purity and heterogeneity of commercial seed. To establish the $F_1$ variety breeding system of oriental mustard, pure line and inbred lines were screened from inbreeding genetic resources. Male-sterile line was also selected from breeding combinations for the quality improvement of mustard. The combining ability from(Indojasai ${\times}$ Goheungdamyang) combinations and isolation line of(MS910 ${\times}$ Japan red mustard 8 ${\times}$ Ganghwa mustard 9) was highest, thus these lines were selected as parental lines. PCR(Polymerase Chain Reaction) and gene sequence analysis revealed that the genes related to CMS(orf263, orf220, and orf288) were distributed in mitochondria. The isolated lines from this study also showed good performance in yield test and farmhouse prove test.

• Korean Journal of Medicinal Crop Science
• /
• v.24 no.6
• /
• pp.451-457
• /
• 2016

Background: Leonurine is a the aerial part of Leonurus japonicus Houttuyn, which has been used as a traditional medicines and is registered in the Korean Pharmacopoeia. Methods and Results: In the present study we performed a heavy metals and thin layer chromatography and measured loss on drying, as well as the contents of total ash, acid-insoluble ash, ethanol soluble compounds, and leonurine, using 15 domestically collected L. japonicus samples. The methods were performed according to the 'crude drugs test of the general test, processes and apparatus', published by MFDS, Korea (2014). The purity test (heavy metals) indicated that levels of Pb and Hg were 0.35 - 3.64, and 0.001 ppm, respectively, whereas the levels of As and Cd were undetectable, and stachydrine was identified by thin layer chromatography ($R_f$ : 0.15). We found that 5.93 - 10.62% (average: $8.58{\pm}1.8%$) of the sample mass was lost during drying, and the contents of total ash, acid-insoluble ash, ethanol soluble compounds, and leonurine were 7.87 - 10.84% (average: $9.62{\pm}0.82%$), 0.99 - 1.76% (average: $1.38{\pm}0.24%$), 16.70 - 23.11% (average: $19.49{\pm}2.14%$) and 0.04 - 0.17% (average: $0.11{\pm}0.04%$) respectively. In addition, HPLC profiling detected leonurine (5.94 min), rutin (16.43 min) and myricetin (26.78 min). Conclusions: We hope that this the rusult of the present study will contribute to the standardization and quality control of Korean herbal medicines.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.11
• /
• pp.1855-1862
• /
• 2016

Cronobacter sakazakii (C. sakazakii) is a foodborne pathogen, posing a high risk of disease to infants and immunocompromised individuals. In order to develop a quick, easy, and sensitive assay for detecting C. sakazakii, a rabbit anti-C. sakazakii immunoglobulin G (IgG) was developed using sonicated cell protein from C. sakazakii. The developed anti-C. sakazakii (IgG) was of good quality and purity, as well as species-specific. The developed rabbit anti-C. sakazakii IgG was attached to the surface of a sulforhodamine B-encapsulated liposome to form an immunoliposome. A test strip was then prepared by coating goat anti-rabbit IgG onto the control line and rabbit anti-C. sakazakii IgG onto the test line, respectively, of a plastic-backed nitrocellulose membrane. A purple color signal both on the test line and the control line indicated the presence of C. sakazakii in the sample, whereas purple color only on the control line indicated the absence of C. sakazakii in the sample. This immunochromatographic strip assay could produce results in 15 min with a limit of detection of $10^7CFU/ml$ in C. sakazakii culture. The immunochromatographic strip assay also showed very good specificity without cross-reactivity with other tested Cronobacter species. Based on these results, the developed immunochromatographic strip assay is efficient for the detection of C. sakazakii and has high potential for on-site detection.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.4
• /
• pp.416-423
• /
• 2009

Hepatitis B core antigen(HBcAg) is an important serological marker used in the diagnosis of hepatitis B virus(HBV) infections. In the current study, a fast and efficient preparative purification protocol for truncated HBcAg from Escherichia coli disruptate was developed. The recombinant HBcAg was first captured by anion exchange expanded bed adsorption chromatography integrated with a cell disruption process. This online capture process has shortened the process time and eliminated the "hold-up" period that may be detrimental to the quality of target protein. The eluted product from the expanded bed adsorption chromatography was subsequently purified using size-exclusion chromatography. The results showed that this novel purification protocol achieved a recovery yield of 45.1% with a product purity of 88.2%, which corresponds to a purification factor of 4.5. The recovered HBcAg is still biologically active as shown by ELISA test.

• Carbon letters
• /
• v.22
• /
• pp.25-35
• /
• 2017

The aim of the work was to investigate the thermo-electrical properties of low cost and rapidly produced randomly oriented carbon/carbon (C/C) composite. The composite body was fabricated by combining the high-pressure hot-pressing (HP) method with the low-pressure impregnation thermosetting carbonization (ITC) method. After the ITC method step selected samples were graphitized at $3000^{\circ}C$. Detailed characterization of the samples' physical properties and thermal properties, including thermal diffusivity, thermal conductivity, specific heat and coefficient of thermal expansion, was carried out. Additionally, direct current (DC) electrical conductivity in both the in-plane and through-plane directions was evaluated. The results indicated that after graphitization the specimens had excellent carbon purity (99.9 %) as compared to that after carbonization (98.1). The results further showed an increasing trend in thermal conductivity with temperature for the carbonized samples and a decreasing trend in thermal conductivity with temperature for graphitized samples. The influence of the thickness of the test specimen on the thermal conductivity was found to be negligible. Further, all of the specimens after graphitization displayed an enormous increase in electrical conductivity (from 190 to 565 and 595 to 1180 S/cm in the through-plane and in-plane directions, respectively).

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.6
• /
• pp.679-687
• /
• 2003

In this study, we investigated the analytical techniques to quantify the ambient concentration of hydrogen sulfide (H$_2$S) in air at ppt concentration level. For this purpose, an on-line GC analytical system equipped with both pulsed-flame photometric detector (PFPD) and thermal desorption unit (TDU) was investigated by collecting ambient air samples. The results of our study generally indicated that calibration conditions of GC system is highly sensitive to affect the accuracy of the analytical technique. Most importantly. we found that the use of different matrices in the the preparation stage of working standards was sensitive to control the overall performance of this technique. The calibration of our analytical system was tested by the two types of working standard (prepared by mixing either with high purity $N_2$ or with the ambient air). According to this test, the latter represented more efficiently the detecting conditions of actual air samples. The peak occurrence patterns of both air samples and standards (prepared by mixing with ambient air) were altered in a similar manner as the function of the loaded volume; however, it was not the case for the $N_2$-mixed standards. Results of our study suggest that detection of H$_2$S is highly different from other sulfides and that its quantification requires minimiaing interfering effects of non -pure substance (like water vapor) and (either sorptive or destructive) loss effects.

• Journal of Nutrition and Health
• /
• v.16 no.2
• /
• pp.107-114
• /
• 1983

There has been no specific test available for identifying the sesame oil among common edible oils. As the contents of sesamin and the ratio of sterols allowed the estimation for the genuine sesame oil, the author investigated to establish some instrumental methods for verification of genuine sesame oil and its distribution in the market. The sesame oil was saponified and the sesamin and sterols were isolated from the unsaponiable fraction by Florisil column chromatography. The individual components were determined by gas- chromatography and sesamin standard (purified sesamin) was obtained by silicagel column chromatography. The gas- chromatographic condition using Flame Ionization Detector supported on 10% OV-101 with di-(2-ethylhexyl) sebacate as an internal standard was suitable, and quantitation of sesamin and sterols, including campesterol, stigmasterol and ${\beta}-sitosterol$ was carried out. The results of this study showed that contents of sesamin in genuine sesame oil were 0.3-0.5% and the ratio of stigmasterol to compesterol was 0.3-0.6 and ${\beta}-sitosterol$ to campesterol 3.0-3.8. The 50 samples from the markets in Seoul were composed of 70% genuine sesame oil, and others were mixed with palm oil, rape seed oil and soybean oil.

• Journal of Powder Materials
• /
• v.23 no.1
• /
• pp.8-14
• /
• 2016

A bulk-type Ta material is fabricated using the kinetic spray process and its microstructure and physical properties are investigated. Ta powder with an angular size in the range $9-37{\mu}m$ (purity 99.95%) is sprayed on a Cu plate to form a coating layer. As a result, ~7 mm-sized bulk-type high-density material capable of being used as a sputter material is fabricated. In order to assess the physical properties of the thick coating layer at different locations, the coating material is observed at three different locations (surface, center, and interface). Furthermore, a vacuum heat treatment is applied to the coating material to reduce the variation of physical properties at different locations of the coating material and improve the density. OM, Vickers hardness test, SEM, XRD, and EBSD are implemented for analyzing the microstructure and physical properties. The fabricated Ta coating material produces porosity of 0.11~0.12%, hardness of 311~327 Hv, and minor variations at different locations. In addition, a decrease in the porosity and hardness is observed at different locations upon heat treatment.

• Journal of the korean Society of Automotive Engineers
• /
• v.3 no.2
• /
• pp.18-26
• /
• 1981

The purpose of this paper is to study the possibility of practical use of gasoline-methanol mixed fuel as an alternative fuel of gasoline engines in the light of engine performances and harmful exhaust emissions as well as mixings and separations of the mixed fuels. When the methanol of 99.8% purity is mixed with super or regular gasoline available on the market today, the experimental results obtained without modifying carburetor in this study are as follows; 1.The separation ratio depends upon the gasoline-methanol mixing ratio only, regardless of fuel temperature and fuel additives for preventing separation of phase. 2.The critical absorption ratio is affected by the gasoline-methanol mixing ratio, its temperature and the quantity of fuel additives. 3.Concerning the distillation temperature, the initial point of all sorts of fuels is almost same,but 10% point and 35-60% point of mixed fuels are lower than those of gasoline only. 4.In case of throttle valve opening set, engine output using the mixed fuels is decreased compared to gasoline, but thermal efficiency is increased as a consequence of decreasing specific energy consumption. 5.In case of fixed load test, thermal efficiency is increased at low engine speed even under low part-load as well as under comparatively high part-load including full load. 6.CO and NOx emissions are reduced remarkably with the mixed fuels.