• Membrane and Water Treatment
• /
• 제1권1호
• /
• pp.1-12
• /
• 2010

Membrane distillation process was used for purification of pre-treated natural water (tap water). The rejection of inorganic and organic compounds in this process was investigated. The obtained rejection of inorganic solutes was closed to 100%, but the volatile organic compounds (VOCs) diffused through the membrane together with water vapour. The content of trihalomethanes (THMs) in the obtained distillate was two-three fold higher than that in the feed, therefore, the rejection of the total organic compounds present in the tap water was reduced to a level of 98%. The intensive membranes scaling was observed during the water separation. The morphology and composition of the fouling layer was studied using scanning electron microscopy coupled with energy dispersion spectrometry. The influence of thermal water pre-treatment performed in a heat exchanger followed by filtration on the MD process effectiveness was evaluated. This procedure caused that significantly smaller amounts of $CaCO_3$ crystallites were deposited on the membrane surface, and a high permeate flux was maintained over a period of 160 h.

• Preventive Nutrition and Food Science
• /
• 제5권3호
• /
• pp.148-152
• /
• 2000

Mussel adhesive protein (MAP) was extracted from Korean Mytilus edulis and then partially purified using Sephacryl S-300 gel permeation chromatography and reversed-phase high performance liquid chromatography. As an indicator of adhesiveness, is 3,4-dihydroxyphenylalanine (DOPA) content was determined. Its DOPA/protein ratio of 0.19 was higher than those of other reports, indicating a good adhesive. The partially purified MAP was confirmed by acid-urea polyacrylamide gel electrophoresis using cetylpiridinium bromide as a cationic detergent. Sea mussel hydrolysates were prepared using three commercial proteases to provide value-added functional materials and their angiotensin converting enzyme (ACE) inhibitory activities were determined. Among hydrolysates of sea mussel, Protamex was the best and further purification would improved ACE inhibitory activity.

• Food Science and Biotechnology
• /
• 제15권2호
• /
• pp.177-182
• /
• 2006

Polyphenol oxidase (PPO) was isolated from the flesh of Fuji apples by DEAE-Cellulose, ammonium sulfate precipitation, phenyl-Sepharose CL-4B, and Sephdex G-100 chromatography. The molecular mass of the purified PPO was estimated to be 40 kDa by SDS polyacrylamide gel electrophoresis. With regard to substrate specificity, maximum activity was achieved with chlorogenic acid as substrate, followed by catechin and catechol whereas, there was no detectable activity with hydroquinic acid, resorcinol, or tyrosine as substrate. The optimum pH and temperature with catechol as substrate were 6.5 and $35^{\circ}C$, respectively. The enzyme was most stable at pH 6.0 and unstable at acidic pH. The enzyme was stable when it was heated to $45^{\circ}C$ but heating at $50^{\circ}C$ for more than 30 min caused 50% loss of activity. Reduced $ZnSO_4$, L-cystein, epigallocatechin-3-o-gallate (EGCG), and gallocatechin gallate (GCG) also inhibited activity.

• 한국식품영양과학회지
• /
• 제20권4호
• /
• pp.388-394
• /
• 1991

Alkaline protease producing bacteria were isolated from soil and identified as Bacillus sp. CW-1121. It was found that the production of alkaline protease reached to maximum in 5 day of fermentation at 4$0^{\circ}C$. The enzyme was purified by ammonium sulfate precipitation, gel filtration on Sephadex G-150 and DEAE-cellulose ion-exchange chromatography. The homogeneity of the purified enzyme was verified by polyacrylamide gel electrophoresis. The enzyme was purified 5.72 fold and yield of the enzyme purification was 16.71%. When the purified enzyme was applied to sodium dodecyl sulfate-polyacrylamide gel electrophoresis, the molecular weight was estimated to be 55, 000.

• Applied Biological Chemistry
• /
• 제37권5호
• /
• pp.334-338
• /
• 1994

Streptococcal nuclease가 Streptococcus sp. 발효액으로부터 stepwise CM-Sepharose 컬럼을 이용하여 완전히 분리 정제되었다. 역가 높은 효소 분획은 0.2 M 용리시 나왔고 분리 정제된 효소의 분자량은 35,000으로 전기영동상 밝혀졌으며 최적 pH와 온도는 각각 pH 9.0, $60^{\circ}C$로 밝혀졌다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제3권2호
• /
• pp.61-66
• /
• 1998

Glycolipids produced by Pseudomonas aeruginosa YPJ-80 were characterized by chromatographic and spectorscopic techniques as a mixture of two rhamnolipids. For recovery of glycolipids from the culture broth, various isolation methods including ultrafiltration, adsorption and solvent extraction were compared. Ultrafiltration showed the best results in terms of glycolipids recovery. Further purification for spectroscopic analysis was carried out by adsorption chromatography and preparative thin layer chromatography. From the spectroscopic analysis, such as IR spectroscopy. FAB-MS, 1H-NMR and 13C-NMR and hydrolysis analysis, the glycolipids were identified as L-${\alpha}$-rhamnopyranosyl-${\beta}$-hydroxydecanoly-${\beta}$-hydroxydecanoate and 2-O-${\alpha}$-L-rhamnopyranosyl-${\alpha}$-L-rhamnopyranosyl-${\beta}$-hydroxydecanoyl-${\beta}$-hydroxydecanoate. Monorhamnolipid and dirhamnolipid lowered the surface tension of water to 28.1 mN/M and 29.3 mN/m, respectively.

• 미생물학회지
• /
• 제38권4호
• /
• pp.224-224
• /
• 2002

Chitin-degrading marine bacterial strain 98CJ11027 was isolated from bryozoa from the coastal area of Cheju Island, Korea, and identified as a member of the genus Vibrio. The molecular mass of the main extracellular chitinase (chitinase I), purified from strain 98CJ11027, was estimated to be 98 kDa. The optimal condition for chitinase I activity is pH 6.0 and 45℃. The activity was inhibited by $Fe^+2$ and$Cu^+2$. Chitinase I displayed the hydrolysis type of chitobiosidase and catalyzed reversed hydrolysis leading to the synthesis of tetraacetylchitotetraose.

• Macromolecular Research
• /
• 제12권4호
• /
• pp.384-390
• /
• 2004

Single-walled carbon nanotubes (SWNTs) have been chemically modified through the formation of carboxylic acid functionalities or by grafting octadecylamine and polystyrene onto them. We purified SWNTs with nitric acid to remove some remaining catalysts and amorphous carbon materials. After purification, we broke the carbon nanotubes and shortened their lengths by using a 3:1 mixture of concentrated sulfuric acid and nitric acid. During these purification and cutting processes, carboxylic acid units formed at the open ends of the SWNTs. Octa-decylamine and amino-terminated polystyrene were grafted onto the cut SWNTs by condensation reactions between the amine and carboxylic acid units. The cut SWNTs did not disperse in organic solvents, but the octadecylamine-grafted and polystyrene-grafted SWNTs dispersed well in dichloromethane and aromatic solvents (e.g., benzene, toluene). Composites were prepared by mixing polystyrene with the octadecylamine-grafted or polystyrene-grafted SWNTs. Each composite had a higher dynamic storage modulus than that of a pristine polystyrene. The composites exhibited enhanced storage moduli, complex viscosities, and unusual non-terminal behavior when compared with a monodisperse polystyrene matrix because of the good dispersion of carbon nanotubes in the polystyrene matrix.

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.109-114
• /
• 2020

This work presents the results of laboratory scale tests of the CARBOFLUOREX (CARBOnate FLUORide EXtraction) process - a novel technology for the recovery of U and Pu from the solid fluorides residue (fluorination ash) of Fluoride Volatility Method (FVM) reprocessing of spent nuclear fuel (SNF). To study the oxidative leaching of U from the fluorination ash (FA) by Na₂CO₃ or Na₂CO₃-H₂O₂ solutions followed by solvent extraction by methyltrioctylammonium carbonate in toluene and purification of U from the fission products (FPs) impurities we used a surrogate of FA consisting of UF₄ or UO₂F₂, and FPs fluorides with stable isotopes of Ce, Zr, Sr, Ba, Cs, Fe, Cr, Ni, La, Nd, Pr, Sm. Purification factors of U from impurities at the solvent extraction refining stage reached the values of 10⁴-10⁵, and up to 10⁶ upon the completion of the processing cycle. Obtained results showed a high efficiency of the CARBOFLUOREX process for recovery and separating of U from FPs contained in FA, which allows completing of the FVM cycle with recovery of U and Pu from hardly processed FA.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 1997년도 한국대기보전학회 춘계학술대회 요지집
• /
• pp.135-137
• /
• 1997