• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.935-940
• /
• 2001

This study search for absorbing sound and exhaust-gas which aims to manufacture continuous void by using clay and foam, the surface of materials is covered with $TiO_{2}$ powder as heat treatment. According to the results of the experiment, the increase of thickness of manufactured sound absorbing materials caused the increase of absorption rate in the range of low and middle sound and thus it can be an important factor of improving absorption rate. Sound absorbing materials could satisfy 70% of the average of sound absorption ratio in 7cm thickness. Also, the manufactured sound absorbing materials is covered with $TiO_{2}$ showed an excellency in the clarification of exhaust-gas under ultraviolet rays treatment when 70% of removal rate and about 10% of generation rate of $NO_{2}$ is settled by the flow of 2 $\ell$/min NO gas. Especially, manufactured sound absorbing materials could improve compressive strength of continuos porous concrete. in the case of 7% bubble addition, when the substitution rate of coagulator was 30% and 20%, compressive strength was 45kgf/$cm^{2}$ and 65kgf/$cm^{2}$ respectively. As the substitution rate of coagulator reducing, compressive strength increased after preforming burnt clay.

• 한국수소및신에너지학회논문집
• /
• 제17권1호
• /
• pp.8-20
• /
• 2006

For large scale separation hydrogen from different mixing ratio(60/40 and 80/20 vol.%) of hydrogen and methane $1Nm^3/hr$ and $4Nm^3/hr$ 2bed-6step pressure swing adsorption(PSA) process was used, respectively. The effects of the feed gas pressure, adsorption time, the feed flow rate and the P/F(purge to feed) ratio on the process performance were evaluated. In the $1Nm^3/hr$ PSA results, 11 atm adsorption pressure and 0.10 P/F ratio might be optimal values to obtain more than 75 % recovery and 99 % purity hydrogen in these processing. The optimum feed flowrate was 22 LPM and 17 LPM in the ratio 60/40 and 80/20, respectively. In the $4Nm^3/hr$ PSA results, 10 atm adsorption pressure might be simulated values to obtain more than 80 % recovery and 99 % purity hydrogen in these processing.

• 환경생물
• /
• 제18권2호
• /
• pp.227-235
• /
• 2000

As a part of basic investigation to Fishery Purge Project for the Special Administrative in Chollanamdo Province, the sedimentary environmental characteristics of Yoja Bay at 15 stations were studied. The analysis was carried out in July, 1998, through studies of Loss On Ignition (LOI) by depth, Total Sulfide (T-5), Chemical Oxygen Demand (COD) concentrations and Grain-size distribution. The LOI value was found to be 6.20-12.20% (mean of 8.89%), with the neighboring Sunhakri and Haksanri areas showing slightly higher values. These values were similar to the LOI values observed in the Hansan-Koje Bay and Jinju Bay areas on the southern coast of Korea. T-S and COD concentrations were found to be, respectively, 0.060-0.104 mg/gㆍd (mean of 0.052 mg/gㆍd) and 5.53-29.71 mg/gㆍd(mean of 13.24 mg/gㆍd), not exceeding eutrophication limits. T-S concentration was especially high at stations close to the central areas of the bay and inland areas, which caused by organic matter input from the nearby agricultural areas. COD concentration was very high at stations nearby the bay entrance and Doonbyungdo, but the mean value was lower than that of Hansan-Koje Bay. This leads us to believe that the level of pollution in Yoja Bay is not significant. The prevailing sediment composition was mud, consisting of 61.38% silt and 34.87% clay. [Sediments in Yoja Bay, Loss On Ignition, Total Sulfide, Chemical Oxygen Demand, Grain-Size Distribution].

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.121.2-121.2
• /
• 2011

Aluminum-doped Zinc Oxide (AZO) is considered as an excellent candidate to replace Indium Tin Oxide (ITO), which is widely used as transparent conductive oxide (TCO) for electronic devices such as liquid crystal displays (LCDs), organic light emitting diodes (OLEDs) and organic solar cells (OSCs). In the present study, AZO thin film was applied to the transparent electrode of a channel-shaped flexible organic solar cell using a low-temperature selective-area atomic layer deposition (ALD) process. AZO thin films were deposited on Poly-Ethylene-Naphthalate (PEN) substrates with Di-Ethyl-Zinc (DEZ) and Tri-Methyl-Aluminum (TMA) as precursors and $H_2O$ as an oxidant for the atomic layer deposition at the deposition temperature of $130^{\circ}C$. The pulse time of TMA, DEZ and $H_2O$, and purge time were 0.1 second and 20 second, respectively. The electrical and optical properties of the AZO films were characterized as a function of film thickness. The 300 nm-thick AZO film grown on a PEN substrate exhibited sheet resistance of $87{\Omega}$/square and optical transmittance of 84.3% at a wavelength between 400 and 800 nm.

• 한국미생물·생명공학회지
• /
• 제27권3호
• /
• pp.236-245
• /
• 1999

Andong Soju is a Korean traditional distilled liquor brewed with Nuruk which is cultured with wild microorganisms. To provide useful information for scientific production and systematic quality control of traditional distilled liquor, the effects of mixed culture of the alcoholic yeasts and saccharifying molds isolated from the Nuruk, and mashes on the flavor and sensory characteristics were investigated. Distillate from mashes cocultured with Saccharomyces cerevisiae and Hansenula anomala using Mucor Nuruk was compared with distillate from mashes brewed with Andong Nuruk and with distillate from plant fermented mashes to analyze their flavor characteristics. The volatile flavor compounds in distillates were analyzed by GC and GC-MS using direct injection, solvent extraction, and purge & trap methods. Alcohols such as 3-methyl-1-butanol, 2-methyl-1-propanol, 1-propanol, and 2-phenyl ethanol; aldehydes such as acetaldehyde and 2-furancar-boxaldehyde; esters such as ethyl ester of acetic acid, hexanoic acid, octanoic acid, decanoic acid; alkanes, alkenes, ketone, sulfur, and pyrone compounds were detected. Alcohols were chief components of flavor compounds. No significant difference in overall acceptability test was shown among three experimental groups(p<0.05), but Nuruk-like aroma, Kaoliangchiew-like aroma, sweet taste, and well rounded mouthfeel showed significant differences among them(p<0.05).

• 분석과학
• /
• 제13권3호
• /
• pp.277-281
• /
• 2000

16종의 휘발성 유기화합물을 blank water에 첨가하고 고정상으로 $100{\mu}m$ polydimethyl siloxane을 입힌 solid phase microextraction(SPME) fiber를 사용하는 headspace SPME방법으로 추출하여 gas chromatography/mass spectrometry (GC/MS)로 분석하였다. 이 방법의 평균회수율은 97%, 평균상대표준편차는 4.7%, 그리고 검출한계는 $0.01-0.5{\mu}g/l$를 나타냈다. 즉 SPME 방법을 이용한 수용액 중의 휘발성 유기화합물의 결과는 현재 많이 사용되고 있는 기존의 다른 방법보다 우수하고 편리한 방법으로 나타났다.

• 대한한의학원전학회지
• /
• 제25권4호
• /
• pp.23-38
• /
• 2012

Objective : Generally speaking Reverting yin disease pattern(厥陰病) is the last step in cold damage(傷寒). Therefore recognized Yin cold disease(陰寒病) is increasing, and resist action One Yang qi(一陽) began to creep into body. But Ke Qin(柯琴) have a different way of thinking that Reverting yin disease pattern connected with the loss of Liver's function. Liver qi depression(肝鬱) make a ministerial fire(相火), and it make a nutrient and blood insufficiency(營血不足). Method : I will try to describe the Sanghanlun's Reverting yin disease pattern through the Ke-qin's JueyinbingJie(厥陰病解), and I would like to point out that the exact meaning of Reverting yin(厥陰) is connected with Liver's ministerial fire. Result : Ke Qin's JueyinbingJie explained the Reverting yin disease pattern was connected with Liver(肝), and according to Six qi theory(六氣學說) connected with ministerial fire, and according to meridian and Collateral theory(經絡學說) connected with closing referring to inward actions(闔) among the Opening closing and pivot(關闔樞). Conclusion : Ke Qin was recognized that Reverting yin disease pattern have relevance to the loss of Liver's function. In other world, It is connect with soothe the liver and purge fire(疏肝瀉火) and nutrient and blood insufficiency(營血不足).

• 수산해양교육연구
• /
• 제21권2호
• /
• pp.269-277
• /
• 2009

Ventilation equipment performs a central role to maintain comfort subway environment. So ventilation equipment of Busan subway line No.1 is required to improve thermal environment. In this study, conditions of thermal environment are presented to improve ventilation equipment at existing subway station platforms by measuring thermal environment of platforms operated ventilation equipment at 14 stations of Busan subway line No.1. AWS of data in comparison with the neighbouring platforms and thermal environment analysis. Thermal environment status of subway platform analysis results are as follows. 1)Daytime platform temperature was higher than outdoor temperature, but night time platform temperature was lower than outdoor temperature. 2)Train wind had effect on improving thermal comfort in platform. 3)When outdoor temperature is below $24^{\circ}C$, inlet air is able to lower than platform temperature. 4)Considering existing ventilation system, night purge systems is useful to improving platform thermal environment.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.130-133
• /
• 2009

액체 로켓 엔진의 경우 작동초기인 점화와 마지막의 소염시의 추진제 공급 순서는 안정적으로 시스템을 운영하는데 많은 영향을 끼친다. 안정적인 엔진의 작동확인을 위해 점화할 때 공급순서와 소염할 때 추진제의 공급 순서를 바꾸어 가면서 연소 실험을 수행 하였다. 본 연구에 사용된 분사기는 과산화수소와 케로신을 추진제로 사용하는 동축 스월형이며, 점화 방식은 촉매 점화를 방식을 사용하였다. 본 실험을 통해서 액체로켓엔진의 연소 시험을 안정적으로 수행하기 위해 점화와 소염할 때의 최적의 시퀀스를 찾아내었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.231-234
• /
• 2001

OBD-II regulations are already effective in many countries. The California Air Resources Board(CARB) first issued regulations in 1985 for the 1988 model year, known as OBD-I, and required the vehicle's engine management computer to warn the driver by means of a dash-mounted light if a malfunction occurred in either the oxygen sensor, the exhaust gas recirculation(EGR) valve or the evaporative emission system purge solenoid, and to store information on troubles that have no recurrent characteristics. This paper presents two methods of wireless monitoring OBD signal, which is one of the ECU output for self diagnostic measurement. RF module is used to monitor ECU's Self diagnostic signal remotely. Two kinds of measurement systems which are based on micro-controller(80C196KC) for portable detection and PC for sever are considered for receiving the RF signal. Therefore, possibility of real-time monitoring of ECU's self diagnostic signal remotely is verified on this paper.