• 한국정밀공학회지
• /
• 제18권1호
• /
• pp.139-146
• /
• 2001

This paper presents a study on heat transfer and residual distortion analysis of laser welded EDFA(Erbium Doped Fiber Amplifier) LD(Laser Diode) Pump using the finite element method. In the production process of LD Pump in light-wave communication system, ferrule and saddle are welded by Nd-YAG laser. These parts experience thermal and mechanical effect during heating and cooling cycle with the laser welding. Thus distortion happens in the laser-welded packaging, and it makes an error in detecting the light signal translate through optical fiber in LD Pump. The amount of final displacement produced by the laser welding is predicted using the finite element method. And the optimal shape of saddle is proposed with the results of numerical analyses to minimize the displacement.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2000년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.166-169
• /
• 2000

This paper presents a study on the LD Pump laser welded heat transfer and distortion analysis by using finite element method. In the production processing, ferrule and saddle of LD Pump in light-wave communication system are welded by multi mode Nd-YAG laser. Thus distortion happens during laser-welded packaging, and it makes an error of detecting the light signal translated through optical fiber in LD Pump. These parts experience thermal and mechanical hysteresis during heating and cooling process come from laser welding. The amount of final displacement is predicted using the finite element method. And the optimal shape is decided by using the result of pre-analysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.729-730
• /
• 2013

• 한국광학회지
• /
• 제4권3호
• /
• pp.289-293
• /
• 1993

파장 792 nm의 AlGaAs 레이저 다이오드로 펌핑되는 Nd:YLF 레이저를 제작하여 펌핑세기와 펌핑빔의 파장에 대한 출력특성을 조사하였다. Brewster 각으로 되어있는 Nd:YLF봉에서 발생하는 비점수차를 보정하기 위하여 공진기 구조를 접힌형태로 하였다. 연속 출력 2.6Watt로 펌핑하였을 때 발진파장 1053 nm에서 최대 출력 1.1Watt를 얻었으며, 이때 전체효율이 39% 였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1335-1336
• /
• 2008

A compact diode-pumped microchip(DPM) green light source which consist of pump LD, $Nd:YVO_4$, KTP and a built-in thermoelectric element has been fabricated for laser projection display. The volume of the source is as small as $0.7\;cm^3$ and we obtained the output power of 25mW with the average electric power consumption in pump LD of 304mW which correspond to the electrical-to-optical efficiency of 7.8%. Another approach using quasi phase matching(QPM) technique has been attempted. We obtained the output power of 90mW of green beam with 350mW pumping of a $Nd:YVO_4$ laser with 20-kHz rep. rate and 10-ns pulse duration. Detailed characteristics and issues of the DPM and QPM green light sources will be addressed.

• 한국군사과학기술학회지
• /
• 제24권6호
• /
• pp.629-637
• /
• 2021

For the stabilization of laser output power and wavelength of the high power fiber laser, the cooling plate must be properly taken into account. In this study, three analyzing methods which are heat transfer theory, CFD and experiment are used to analyze cooling plate performance by measuring pump Laser Diode(LD) temperature. Under limited operating conditions of a cooling plate, the internal flow of cooling plate is transitional flow so that the internal flow is assumed to be laminar and turbulence flow and conducted theoretical calculation. Through CFD, temperature of pump LD and characteristics of the internal flow were analyzed. By the experiment, temperature of pump LD was measured in real conditions and the performance of the cooling plate was verified. The results of this study indicate that three analyzing methods are practically useful to design the cooling plate for the high power fiber laser or similar things.

• 한국광학회지
• /
• 제22권2호
• /
• pp.96-101
• /
• 2011

본 논문에서는 930 nm 대역 광섬유 결합 레이저 다이오드 여기광을 0.8 mm 두께의 얇은 디스크형 Yb:YAG 결정에 조사하여 레이저 발진 특성을 연구하였다. 구멍이 있는 구리판 사이에 레이저 결정을 고정시켜 발생된 열을 접촉 냉각시키는 구조를 채택하였고, 구리판 구멍 크기에 따른 조사 지점의 온도 변화를 발진 피크 스펙트럼 이동으로부터 조사하였다. 광섬유 결합 LD 여기 광에 대해 발진 레이저 출력은 기울기 효율 42.2%, 광변환 효율 34.8%로 높게 구현되었다. LD 여기 전류 및 구리판 구멍 크기가 증가함에 따라 여기광이 조사된 지점의 온도가 증가하였다. 구리판 구멍 크기가 결정 두께에 비해 상당히 큰 경우, 높은 여기광의 세기에서는 온도 상승이 선형 변화로부터 벗어남을 확인하였다.

• 전자공학회논문지A
• /
• 제30A권5호
• /
• pp.45-51
• /
• 1993

An erbium doped fiber amplifier(EDFA) pumped by aingle 1.48$\mu$m LD was fabricated, and its gain and noise characteristics were measured. As a signal source, 1548 nm wavelength DFB LD was used. The small signal net gain of the EDFA module was 21.8 dB with maximum gain coefficient 0.7dB/mW for the erbium fiber length of 17.6 m, the pump power of 58 mW, and an input signal power of -25 dBm, respectively. The saturation power of the EDFA was 1 dBm for the input signal power of -5 dBm and the noise figure, measured by using an optical spectrum analyzer, was 5.8 dB for the input signal power of -40 dBm.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.172-173
• /
• 2002

An erbium-ytterbium co-doped phosphate glass waveguide amplifier, fabricated by two-step ion-exchange, is presented. The performance of the amplifiers are investigated in viewpoints of net gain, pump power, and noise figure. The waveguide has propagation loss of 0.7 dB/cm Including insertion loss at 1.304 $\mu\textrm{m}$. At a signal wavelength of 1.534 $\mu\textrm{m}$, a high net gain of 12.8 dB and low noise figure of less than 3.9 dB are archived in a 4 cm long waveguide when injected by 140 ㎽ of LD pump at 0.98$\mu\textrm{m}$ in single pass configuration.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.716-721
• /
• 2016

A single-and dual-wavelength switchable polarized Yb-doped double-clad fiber laser around 1120 nm based on a pair of fiber Bragg gratings (FBGs) is demonstrated. The polarization-maintaining (PM) linear cavity is composed of a double clad PM Yb-doped fiber (YDF) and a pair of PM FBGs. The laser can operate in stable dual-wavelength or wavelength-switching modes due to the polarization hole burning (PHB) and the spatial hole burning (SHB) enhanced by the PM linear cavity. In dual-wavelength operation, the two orthogonally polarized wavelengths are centered at 1118.912 nm and 1119.152 nm, with an interval of 0.24 nm and a signal to noise ratio (SNR) of 35 dB. The maximum output power is 14.67 W when the launched LD pump is 24 W corresponding to an optical efficiency of 61.1%. The lasing lines switchover may be realized by adjusting the polarization controller (PC) fitted in the cavity. The two single-wavelengths are 1118.912 nm and 1119.152 nm. When the injected LD pump is 24 W, the highest output powers are 7.68 W and 8.64 W corresponding to optical efficiencies of 32% and 36% respectively. The spectral linewidth of the lasing lines are 0.075 nm and 0.07 nm, and the average numerical values of PER aredB and 19.9 dB, respectively.