• 제목/요약/키워드: pulses

검색결과 1,600건 처리시간 0.043초

능동픽셀센서 구동회로의 SPICE 모사 분석 (Characterization of Active Pixel Switch Readout Circuit by SPICE Simulation)

  • 남형진
    • 반도체디스플레이기술학회지
    • /
    • 제6권2호
    • /
    • pp.49-52
    • /
    • 2007
  • Characteristics of an active pixel switch readout circuit were studied by SPICE simulation. A simple readout circuit consists of an operation amplifier, a diode, and a down-counter was suggested, and its successful operation was verified by showing that the differences in the detected signal intensity are accordingly converted to modulation of the voltage pulses generated by the comparator. A scheme to use these pulses to generate the original image was also put forward.

  • PDF

HID 램프용 전자식 안정기의 점화기에 관한 연구 (A Study on Ignitors of the Electronic Ballast for HID Lamps)

  • 박종연;정동열
    • 산업기술연구
    • /
    • 제18권
    • /
    • pp.157-163
    • /
    • 1998
  • Today there is an ever increasing effort to control high-pressure discharge lamps with electronic ballasts. HID lamps can be ignited by high-voltage pulses and need an ignitor to start them. An ignitor gives high-voltage pulses to HID lamps, which have the type of the arc discharge. Two kinds of ignitor circuits have been analyzed by the P-spice program and we have shown experimental results in this paper. The result of this study seems to be able to help to develope various ignitors.

  • PDF

운방전에 의해서 방사된 자계 파형의 특징과 통계 (Features and Statistics on the Magnetic Field Waveforms Radiated by Intracloud Discharges)

  • 이복희;이동문;조성철
    • 조명전기설비학회논문지
    • /
    • 제19권6호
    • /
    • pp.59-66
    • /
    • 2005
  • 본 논문은 운방전에 의해서 방사된 전자계 펄스의 특징과 통계에 관한 것으로 LabVIEW 기반의 시변성 자계측정시스템을 구성하였다. 이 자계측정시스템의 주파수대역은 $300[Hz}{\sim}1[MHz]$이고, 응답감도는 2.78[mV/nT]이며, 검출된 자계 파형의 기록에는 수직해상도와 최대기록시간이 각각 12비트와 100[ms]인 데이터취득시스템이 적용하였다. 운방전에 의해서 발생한 전자계 펄스는 파두부분에 하나 또는 둘 이상의 빠른 펄스가 중첩된 양방성 파형으로 나타났다. 운방전의 평균지속시간은 약 $1.05{\pm}0.32[ms]$이었으며, 평균 8개의 양방성 펄스가 발생하였다.

A Simulation Study of a Chopping System for Extracting a Pulsed Beam from a Cyclotron

  • 김재홍;홍성광;김미정;김성준;김명진;김도균;윤종철;김종원
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.537-537
    • /
    • 2013
  • Cyclotron-accelerated ion beams are used for various researches, such as nuclear physics, nuclear chemistry, biotechnology, and material sciences including radio-isotope production. Recently considerable applications are asked to the cyclotron development undertaken to meet user requirements of various ions'energies, intensities, and their pulsed beams. For instance, a cocktail beam acceleration technique rapidly changing the ion species and energies was developed to irradiating integrated circuit chips. Also a chopping system in a cyclotron injection line is considered for producing a pulsed ion beam with a relatively long period compared with that generated by the resonance frequency. For the research in neutron time-of-flight measurement, a single-pulsed beam with a repetition interval of the order of mili-seconds or longer is necessary to have a good resolution and to remove background events. In this paper a feasibility of pulsed beam with an external ion source is simulated by adopting a combination system of a chopper accompanying with a bunching stage in the injection line and an additional chopper after the exit of the cyclotron in order to produce beam pulses with a range of $1{\mu}s{\sim}1ms$ periods from a resonance RF cycle. The pulseperiod will be adjusted by chopping the number of beam bunches from the injected pulses in the injection line. However, the longer pulses will have reduced number of beam pulses and sacrificed beam currents. Because the beam users need an intense single pulsed beam, a careful tuning of the acceleration phase and a high-intense external ion source are necessary to achieve an intense single-pulsed beam from the cyclotron. It is essential to strictly match the acceleration phase of injected beams in the central region of the cyclotron to improve its efficiency. An effect of space charge at each pulse from the ion source will be also considered.

  • PDF

다중 사용자 환경에서 무선광대역 시스템의 시간도약 순열을 이용한 반복 부호의 복호화 기법 (Decoding Method of Repetition Pulses Using Time-Hopping Sequence for UWB-IR in Multi User Environments)

  • 민승욱
    • 한국산학기술학회논문지
    • /
    • 제14권10호
    • /
    • pp.5162-5168
    • /
    • 2013
  • 광대역통신 시스템에서 사용되는 시간도약 기법은 다중경로 페이딩을 완화시키고, 여러 사용자의 다중 접속기회를 제공하기 위하여 사용된다. 짧은 시간 동안의 펄스를 전송하는 광대역신호의 경우 다중경로 페이딩을 극복하고, 신뢰성 있는 통신을 위하여, 하나의 비트 시간 동안에 동일한 펄스를 반복되게 전송한다. 제안하는 복호화 기법은 다중 사용자 환경에서 두 개 이상의 펄스가 다중경로 페이딩에 의해서 프레임간 혹은 심볼간 간섭을 일으키는 프레임 내에서 시간도약 부호에 따라 결정되는 펄스간의 간격을 이용하여 반복 전송된 신호의 복호화 성능을 개선시키는 기법이다. 모의실험을 통하여, 단일 사용자 환경에서 BER=$10^{-3}$에서 0.5dB 정도의 이득을 얻는 것으로 나타났다. 다중사용자 환경에서도 시간도약 부호의 특성을 이용한 방식의 복호화 성능이 기존 방식에 비하여 우수한 성능을 보이는 것을 확인할 수 있다.

사다리꼴 필터를 이용한 효율적인 중첩펄스 처리 알고리즘 구현 (Implementation of Efficient Pile-up Pulse Processing Algorithm Based on Trapezoidal Filter)

  • 박철암;정진균
    • 전자공학회논문지
    • /
    • 제50권8호
    • /
    • pp.162-167
    • /
    • 2013
  • X-선과, ${\gamma}$-선을 이용한 형광분석장치는 현재 널리 쓰이는 물질의 고유특성을 분석하는 장치이다. 하지만 여러 가지 원인으로 인해 장치사용 시 측정 신호에서 중첩 현상이 발생한다. 검출 신호의 높이는 측정 물질의 특성을 반영하며 측정 물질을 정확히 분석하기 위해서는 중첩된 신호를 제거하거나 복원을 해야 한다. 현재 trapezoidal 필터는 형광분석장치에 널리 사용되고 있으며 중첩펄스 검출에서도 좋은 결과를 보이고 있다. 본 논문에서는 측정 신호의 사다리꼴 변형에 기반 한 중첩펄스 처리방법을 제안한다. 제안방법은 사다리꼴 필터를 이용한 최대값 검출 알고리즘에 두 개의 카운터와 몇 개의 레지스터만을 추가하여 추가적인 중첩펄스 처리 알고리즘을 구현하기 때문에 기존 방법에 비해 하드웨어 복잡도가 훨씬 적으면서도 정확히 중첩펄스를 처리 할 수 있다.

Design of a Femtosecond Ti:sapphire Laser for Generation and Temporal Optimization of 0.5-PW Laser Pulses at a 0.1-Hz Repetition Rate

  • Sung, Jae-Hee;Yu, Tae-Jun;Lee, Seong-Ku;Jeong, Tae-Moon;Choi, Il-Woo;Ko, Do-Kyeong;Lee, Jong-Min
    • Journal of the Optical Society of Korea
    • /
    • 제13권1호
    • /
    • pp.53-59
    • /
    • 2009
  • A chirped-pulse amplification Ti:sapphire laser system has been designed using a 10-Hz 100-TW Ti:sapphire laser to generate 0.1-Hz 0.5-PW laser pulses and optimize their temporal qualities such as temporal contrast and pulse duration. A high-energy booster amplifier to be added is expected to produce an energy above 30 J through the parasitic lasing suppression and the efficient amplification. To improve the temporal contrast of the laser pulses, a high-contrast 1-kHz amplifier system is used as a front-end. A grating stretcher which makes the laser pulse have 1-ns duration is used to prevent optical damages due to high pulse energy during amplification. A grating compressor has been designed with group delay analysis to obtain the recompressed pulse duration close to the transform-limited pulse duration. The final laser pulses are expected to have energy above 20 J and duration below 40 fs.

비정질 실리콘을 이용한 방사선 계측시 Photoconductive Gain의 특성

  • 이형구;신경섭
    • 대한의용생체공학회:의공학회지
    • /
    • 제18권3호
    • /
    • pp.307-313
    • /
    • 1997
  • 비정질 실리콘에서의 photoconductive gain mechanism을 방사선 계측시 이용하기 위한 연구를 수행하였다. p-i-n, n-i-n, n-i-p-i-n과 같은 여러 형태의 비정질 실리콘 계측기를 제작하고 시험하였다. Photoconductive gain은 두 가지의 시간적 범위에서 측정하였다. : 하나는 고에너지의 하전입자나 감마선의 통과를 모사하기 위해서 $1{\mu }$ sec 보다 짧은 가시광선 펄스를 사용하였고, 다른 하나는 의학영상에 사용되는 x-선을 모사하기 위하여 보다 긴 1msec 정도의 가시광선 펄스를 사용하였다. 두 가지의 photoconductive gain-current gain과 charge gain-을 정의하여 실험하였으며, charge gain은 current gain을 시간에 따라 적분한 값이다. 10 mA/$cm^2$의 dark current density level에서, 짧은 펄스에 대해서는 3~9정도의 charge gain을 얻을 수 있었고 긴 펄스에 대해서는 수백의 charge gain을 얻을 수 있었다. 여러 가지의 gain에 대한 결과를 계측기의 구조, 부가전압, dark current density와의 관계를 통하여 논의하였다.

  • PDF

타이밍 지터 환경에서 MHP 펄스를 이용한 M 진 초광대역 시스템의 성능분석 (Performance Analysis of M-ary UWB System using MHP Pulses in the Presence of Timing Jitter)

  • 황준혁
    • 한국정보통신학회논문지
    • /
    • 제19권1호
    • /
    • pp.69-76
    • /
    • 2015
  • 본 논문은 MHP 펄스의 직교성을 이용한 M진 초광대역(UWB) 시스템을 제안하고 시스템의 성능을 분석한다. 제안하는 M진 초광대역 시스템은 각 펄스 차수 간에 직교하는 특성을 가지는 MHP 펄스를 선형 결합하여 펄스진폭방식으로 데이터를 M진으로 전송한다. 제안하는 M진 초광대역 시스템의 성능을 분석하기 위해 MHP 펄스의 상관함수를 구하고, AWGN 환경과 타이밍 지터 환경에서 시스템의 성능을 분석한다. 제안하는 M진 초광대역 시스템은 기존의 M진 초광대역 시스템에 비해서 비트오류확률(BER)이 향상되며, 타이밍 지터에 강인하고 방사전력이 낮다는 특성을 가짐을 보인다. 제안하는 M진 초광대역 시스템에 에러코딩 기법이나 레이크 수신기를 결합하여 사용하면 시스템의 성능은 더욱 더 향상될 것이다.