• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.514-522
• /
• 1999

The laser-induced plasma affects greatly on the results of welding process. moreover selective evaporation loss of alloying elements leads to change in chemical composition of weld metal as well as the mechanical properties of welded joint. this study was undertaken to obtain a fundamental knowledge of pulsed laser welding phenomena especially evaporation mechanism of different aluminum alloys. The intensities of molecular spectra of AlO and MgO were different each other depeding on the power density of a laser beam Under the low power density condition the MgO band spectrum was predominant in intensity while the AlO spectra became much stronger with an increase in the power density. These behaviors have been attributed to the difference in evaporation phenomena of Al and Mg metals with different boiling points and latent heats of vaporization. The time-averaged plasma temperature and electron number density were determined by spectroscopic methods and consequently the obtained temperature was $3,280{\pm}150K$ and the electron number density was $1.85{\times}10^{19}\;l/m^3$.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.507-510
• /
• 2005

High voltage pulse power supply using Marx generator and solid-state switches is proposed in this study. The Marx generator is composed of 12 stages and each stage is made of IGBT stack, two diode stacks, and capacitor. To charge the capacitors of each stage in parallel, inductive charging method is used and this method results in high efficiency and high repetition rates. It can generate the pulse voltage with the following parameters: Voltage: up to 120kv Rising time: sub ${\mu}S$ Pulse width: up to $10{\mu}S$, Pulse repetition rate: 1000pps The proposed pulsed power generator uses IGBT stack with a simple driver and has modular design. So this system structure gives compactness and easiness to implement total system. Some experimental results are included to verify the system performances in this paper.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 추계학술대회
• /
• pp.49-51
• /
• 2019

본 논문은 고전압 양극성 펄스 모듈레이터에 대해 소개한다. 모듈레이터는 충전을 위한 공진형 컨버터와 고전압 펄스를 생성하기 위한 12개의 파워셀로 구성된다. 12개의 파워셀은 다중 권선 변압기를 통해 모든 셀이 병렬로 충전되며, 방전 시에는 모든 셀이 직렬로 연결되어 고전압을 생성한다. 12개의 파워셀을 구성하는 48개의 스위치에 절연된 전력과 신호를 동시에 공급하기 위해, 2개의 고전압 케이블로 구성된 양극성 컨트롤 루프가 설계되었다. 최종적으로 10kV, 100A, 3kHz 사양을 갖는 양극성 펄스 모듈레이터가 구현되었으며, 저항부하 및 리액터 부하조건에서 테스트 되었다. 실험결과를 통해 제안하는 양극성 펄스 모듈레이터의 신뢰성이 검증되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1960-1962
• /
• 2000

Polyehtylene[PE] in polymer insulation materials of used power cable have carried out in abundance of experiment and study for electrical conduction. insulation breakdown. dielectric character and so on. When apply to field for power cable to make PE, application of DC withstand test to put in practice for inspection is get to effect accumulated space charge. In this paper, to make use of Pulsed Electro-Acoustic(PEA). It is analysis to take shape space charges under AC and DC voltage, clear up the point at issue for effect of DC withstand test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1554-1555
• /
• 2006

We have studied the backward wave oscillator, a power pulsed generator oscillator at 20 GHz has higher frequency then current one. An absolute instability linear analysis was used for the purpose of designing the slow wave structure. A large diameter of the slow wave structure was adopted to prevent the breakdown brought about by the increase of power density.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1837-1839
• /
• 2003

Recently deep interests have been paid on the effective generation of ozone, which has been widely used for water treatment, deoderization, color removal and chemical processing of exhausted smoke. The silent discharge reaction has been proposed as the most effective in the many ozone generation methods by electric discharge, because silent discharge excel others in the condition of high ozone generation yield and low power consumption. In this paper, ozone water generated system measure with silent discharge characteristics and pulsed power supply.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.187-188
• /
• 2015

본 논문에서는 펄스전원장치에 고전압을 공급하기 위한 DC 전원장치의 개발에 관해 다룬다. 제작된 DC 전원장치는 공진형 컨버터에 배전압 정류기를 채택하여 높은 전압이득과 전력 밀도를 가진다. 특히, 정류다이오드의 전압 균등화를 위해 사용하는 커패시터를 병렬공진 커패시터로 활용함으로써, 사용되는 소자의 수를 최소화하며 높은 신뢰성을 얻을 수 있다. 또한, 두개의 공진주파수로 인해 공진전류가 사각파 형태가 되어 낮은 도통손실을 가진다. 제안된 회로를 이론적으로 분석하고, 그 타당성을 실험으로 검증한다.

• Journal of Korean Vacuum Science & Technology
• /
• 제2권2호
• /
• pp.133-138
• /
• 1998

To enhance the ionization level of I-PVD and reduce the coil voltage two approaches were tried and as a diagnostic, optical emission spectroscopy and impedance analysis of the plasma was done with a range of Ar pressures and RF power along with XRD analysis of deposited Ag films. RF sputtering power was pulsed with various on/off time scales to recover the ICP quenched by sputtered metals. This in average enhances the ionization of the sputtered atoms with 10 ms/10 ms and 100 ms/100ms pulse on/off time duration and gives higher (200) preferred orientation over (111) in deposited Ag films. Secondly, Small axial B field about 8G remarkably reduced RF coil sputtering and showed scaled relationship between RF power and magnetic field strength for optimal process condition. From OES of Ar0 and Ar+, wave-like dispersion structure appeared and reduced the coil voltage about 20% at very weak field strength of 8G. This should be studied further to have nay relation with low mode helicon wave launching.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.254-256
• /
• 2019

본 논문은 파워셀 구조를 기반으로 설계된 양극성 펄스 전원장치에 대하여 소개한다. 파워셀은 풀브릿지 구조를 기반으로 설계되었으며, 833V를 출력하는 각 셀이 직렬로 연결되어 고전압을 생성하는 구조를 갖는다. 모든 파워셀의 방전 스위치를 구동하기 위해서 절연된 전력과 신호의 동시공급이 가능한 게이트 회로 구동방안이 제안되었다. 양극성 펄스 출력을 위한 파워셀의 각 래그의 단락을 방지하기 위한 게이트 회로가 설계되었다. 설계된 양극성 펄스 파워 모듈레이터의 동작을 검증하기 위해 테스트 회로가 구현되었다. 시험회로는 출력전압, 펄스 폭, 반복률 가변 조건에서 테스트 되었으며, 이를 통해 제안하는 양극성 펄스 파워 모듈레이터의 구조 및 게이트 구동회로의 신뢰성이 검증되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1275-1277
• /
• 1995

We designed and constructed an extremly high power s-band traveling wave resonator for the test of high power microwave components using 80MW pulsed klystron with $4{\mu}s$ pulse width. The 10dB directional coupler for the input power coupling was used, and the ring consists of phase shifter, tuner, H-band, and other microwave components. The designed total electrical length of the system is 10 times of the waveguide wavelength, ${\lambda}_g$=15.3cm, and the measured total insertion loss is 0.15dB. The low power test measurment showed the power multiplication of 14.69. The design goal is to achieve the peak power of 300MW, pulse width $4{\mu}s$ with 30 pulse repetition rate. In this article we discuss the treveling wave resonant ring constructed at the PAL laboratory together with the test results.