• Journal of Welding and Joining
• /
• 제19권6호
• /
• pp.622-629
• /
• 2001

The aim of this experiment is to establish the method that obtains symmetrically two nuggets in microresistance series spot welding. The sheets of austenite stainless steel STS304 applied to various electronic parts were experimented by the inverter welding power source of polarity controllable type and by the twin head for left and right electrode force to be controlled separately. The experimental results were obtained as follows : 1) When series spot welding was carried out by DC 1 pulse as welding current with same electrode force at left and right, the asymmetry of nuggets was resulted from the larger nugget of the (-) pole because of the Peltier effect. The dynamic resistance of weld spot at left and right was appeared differently according to the growth of nuggets. 2) When AC 1 cycle by welding power source of polarity controllable type was applied, the nuggets were almost symmetrically formed. 3) In a twin head, if the electrode force of (-) pole was larger than that of (+) pole, the diameters of two nuggets became to same. It was confirmed that the dynamic resistance of (-) pole was decreased to the same level as it of (+) pole. 4) Although the forces of left and right electrode were same, and only DC 1 pulse was applied, symmetric nuggets were obtained if the conductivity of (+) pole was lower than it of (-) pole.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.905-915
• /
• 2015

Two PWM techniques using space vector pulse-width modulation (SVPWM) are proposed for a two-phase permanent magnet synchronous motor (PMSM) driven by a two-phase eight-switch inverter. A two-phase motor with two symmetric stator windings is usually driven by a two-phase four-, six-, or eight-switch inverter. Compared with a four- and six-switch inverter, a two-phase eight-switch inverter can achieve larger power output. For two-phase motor drives, the SVPWM technique achieves more efficient DC bus voltage utilization and less harmonic distortion of the output voltage. For a two-phase PMSM fed by a two-phase eight-switch inverter under a normal SVPWM scheme, each of the eight PWM trigger signals for the inverter have to be changed twice in a cycle, causing a higher PWM frequency. Based on the normal SVPWM scheme, two effective SVPWM schemes are investigated in order to reduce the PWM frequency by rearranging four comparison values, while achieving the same function as the normal PWM scheme. A detailed explanation of the normal and two proposed SVPWM schemes is illustrated in the paper. The experimental results demonstrate that the proposed schemes achieve a better steady performance with lower switching losses compared with the normal scheme.

• 한국치위생학회지
• /
• 제7권4호
• /
• pp.471-479
• /
• 2007

The purpose of this study was to examine the optimum condition of impulse during the anodic spark oxidation applying pulse current as well as to find the excellent condition for HA precipitation the after electrochemical hydrothermal treatment by cathode reduction method. After anodic spark oxidation, the anodized specimen and the Pt plate connected cathode and anode, respectively. Hydrothermal treatment performed at 90, 120, $150^{\circ}C$ for 2 hours in the electrolyte containing $K_2HPO_4$, $CaCl_2{\cdot}2H_2O$, Tris(Hydroxymethyl)-$(CH_2OH)_3\;CNH_2$(Aminomethane), and NaCl. The optimum impulse voltage for anodic spark oxidation was 350V. The optimum pulse cycle measured at 10 mS. The HA crystals precipitated excellently by cathode reduction at $150^{\circ}C$ for 2 hours. The phases of anatase, rutile, and HA coating on the surface of modified titanium surface immersed in Hanks' solution for 3weeks were detected by XRD measurement and the intensity of HA crystal phase has increased by temperature and time of hydrothermal treatment. According to the our experiments, we found that Pure Ti will be good materials of bioactivity and biocompatibility.

• 한국컴퓨터정보학회논문지
• /
• 제17권3호
• /
• pp.105-111
• /
• 2012

광용적맥파는 심박과 동맥 혈액의 산소포화도 등을 측정하기 위하여 널리 사용된다. 본 논문에서는 요골동맥에서 780nm와 940nm 적외선 LED를 사용하여 PPG 신호를 측정할 수 있는 모니터링 시스템을 구현하였다. 구현된 시스템은 여러 상황에서 특성이 서로 다른 8종의 LED와 2종의 광전 센서를 조합하여 요골동맥에서 광전용적맥파를 측정하였다. 요골동맥에서 측정된 파형들은 반전되어서 기록된다. 이렇게 반전된 파형은 수축기의 신호는 감소시키고, 확장기의 신호는 증가시킨다. 시스템을 통하여 투과형 방식과 반사형 방식에서 각각의 신호 검출이 적합한 환경과 최적의 센서 조합을 파악하여 모니터링 시스템을 구현하고, 각 조합별 그 결과 피검자의 요골동맥에서 안정적으로 사용할 수 있는 심박신호 측정 시스템을 개발하였다.

• ETRI Journal
• /
• 제39권5호
• /
• pp.737-745
• /
• 2017

A 6-GHz-to-18-GHz monolithic nonuniform distributed power amplifier has been designed using the load modulation of increased series gate capacitance. This amplifier was implemented using a $0.25-{\mu}m$ AlGaN/GaN HEMT process on a SiC substrate. With the proposed load modulation, we enhanced the amplifier's simulated performance by 4.8 dB in output power, and by 13.1% in power-added efficiency (PAE) at the upper limit of the bandwidth, compared with an amplifier with uniform gate coupling capacitors. Under the pulse-mode condition of a $100-{\mu}s$ pulse period and a 10% duty cycle, the fabricated power amplifier showed a saturated output power of 39.5 dBm (9 W) to 40.4 dBm (11 W) with an associated PAE of 17% to 22%, and input/output return losses of more than 10 dB within 6 GHz to 18 GHz.

• Journal of Power Electronics
• /
• 제19권4호
• /
• pp.907-921
• /
• 2019

This paper presents two advanced hybrid pulse-width modulation (PWM) strategies for multilevel inverters (MLIs) that provide both common-mode voltage (CMV) elimination and current ripple reduction. The first PWM utilizes sequences that apply one switching state at the double ends of a half-carrier cycle. The second PWM combines the advantages of the former and an existing four-state PWM. Analyses of the harmonic characteristics of the two groups of switching sequences based on a general switching voltage model are carried out, and algorithms to optimize the current ripple are proposed. These methods are simple and can be implemented online for general n-level inverters. Using a three-level NPC inverter and a five-level CHB inverter, good performances in terms of the root mean square current ripple are obtained with the proposed PWM schemes as indicated through improved harmonic distortion factors when compared to existing schemes in almost the entire region of the modulation index. This also leads to a significant reduction in the current total harmonic distortion. Simulation and experimental results are provided to verify the effectiveness of the proposed PWM methods.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권8호
• /
• pp.3880-3899
• /
• 2019

Distributive desynchronization algorithms based on pulse-coupled oscillator (PCO) models have been proposed for achieving collision-free wireless transmissions. These algorithms do not depend on a global clock or infrastructure overheads. Moreover, they gradually converge to fair time-division multiple access (TDMA) scheduling by broadcasting a periodic pulse signal (called a 'firing') and adjusting the next firing time based on firings from other nodes. The time required to achieve constant spacing between phase neighbors is estimated in a closed form or via stochastic modeling. However, because these algorithms cannot guarantee the completion of desynchronization in a short and bounded timeframe, they are not practical. Motivated by the limitations of these methods, we propose a practical solution called PD-DESYNC that provides a short and deterministic convergence time using a flag firing to indicate the beginning of a cycle. We demonstrate that the proposed method guarantees the completion of desynchronization within three cycles, regardless of the number of nodes. Through extensive simulations and experiments, we confirm that PD-DESYNC not only outperforms other algorithms in terms of convergence time but also is a practical solution.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.181-187
• /
• 2019

In this paper, we demonstrated a power amplifier monolithic microwave integrated circuit (MMIC) for X-band radar applications. It utilizes commercial $0.25{\mu}m$ GaN-based high electron mobility transistor (HEMT) technology and delivers more than 20 W of output power. The developed GaN-based power amplifier MMIC has small signal gain of over 22 dB and saturated output power of over 43.3 dBm (21.38 W) in a pulse operation mode with pulse width of $200{\mu}s$ and duty cycle of 4% over the entire band of 9 to 10 GHz. The chip dimensions are $3.5mm{\times}2.3mm$, generating the output power density of $2.71W/mm^2$. Its power added efficiency (PAE) is 42.6-50.7% in the frequency bandwidth from 9 to 10 GHz. The developed GaN-based power amplifier MMIC is expected to be applied in a variety of X-band radar applications.

• 대한한의진단학회지
• /
• 제19권2호
• /
• pp.75-90
• /
• 2015

Objectives The purposes of this study was to develope a Qi gong exercise that suits characteristics of post mastectomy women, and to evaluate the effect of Qi gong exercise on immune response, blood circulation index, pulse wave parameter and heart rate variability. Methods This study was applied to total 35 post mastectomy women, including 17 for experiment group and 18 for control group. The Qi gong exercise was composed of total 24 times of 90 minutes per each time, twice a week, and 12 weeks and it was conducted by the oriental medicine professor who was an expert of Qi gong exercise. Results 1. Two group comparison revealed that the experimental group had significantly improved immune response(p<.021), HR(beats/min)(p<.001), ESV(ml/beat)(p=.038), ESI($ml/beat/m^2$)(p=.040), ECO (L/min)(p=.019), ECI($L/min/m^2$)(p=.023), ECRI($dyne^*sec/cm$)(p=.015), Left Kwan($div^3$)(p=.021), Right Kwan($div^3$)(p=.038), Mean HRV(cycle/min)(p<.001), SDNN(ms)(p=.043), RMSSD(ms)(p=.040), and TP(log $ms^2$)(p=.039). 2. Two group comparison revealed that the experimental group had significantly decreased ECR ($dyne^*sec^*cm^{-5}$) (p=.034), Left RAI(p=.044), Right RAI(p=.042), and pNN50(%)(p=.038). Conclusions These results from Qi gong exercise program can be used as basic data for development of health promotion program for Post Mastectomy Women.

• 한국전자파학회논문지
• /
• 제25권2호
• /
• pp.172-182
• /
• 2014

본 논문에서는 능동 위상 배열 레이더에 사용되는 X대역 반도체 송수신기의 설계와 측정 결과에 대해 기술한다. 기존의 50 W 이하의 X대역 송수신 모듈 대비, 단위 증폭 소자로 GaN 소자를 사용하여 증폭회로를 설계하여 고출력, 고효율의 성능을 구현하였다. 제작된 반도체 송수신기의 송신 출력은 200 W(53 dBm) 이상이며, 최장 펄스 폭은 20 us에서 펄스 평탄도는 0.4 dB를 만족한다. 최대 듀티 비는 20 %이다. 수신 이득은 26 dB, 잡음 지수는 4.5 dB의 수신 특성을 갖는다. 송신 출력에 의한 수신 경로 및 단위 증폭 소자의 손상을 방지하기 위한 구조를 적용하였다.