• Journal of Biomedical Engineering Research
• /
• v.2 no.2
• /
• pp.103-108
• /
• 1981

In this paper, the reaction time and the accuracy of saccade eye movement are measured by using random pulse and periodic pulse, random pulse step and periodic pulse step through the subject utilizing the infra-red method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.3
• /
• pp.239-245
• /
• 1996

The time-domain response of a two-conductor-structure transmission line excited by an incident electromagnetic pulse is numerically analyzed using the Finite-Difference Time-Domain (FDTD) method. The external electromagnetic pulse is generated by ultilizing a TEM cell. The simulated time-domain response is compared with the time-domain response which is obtained by the Inverse Fast Fourier Transform(IFFT) of the frequency domain measurement data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3A
• /
• pp.311-318
• /
• 2008

We propose new pulse shapes for FCC-compliant ultra-wideband (UWB) radios. The projections onto convex sets (POCS) technique is used to optimize temporal and spectral shapes of UWB pulses under the constraints of all of the desired UWB signal properties: efficient spectral utilization under the FCC spectral mask, time-limitedness, and good autocorrelation. Simulation results show that for all values of the pulse duration, the new pulse shapes not only meet the FCC spectral mask most efficiently, but also have nearly the same autocorrelation functions. It is also observed that our truncated (i.e., strictly time-limited) pulse shapes outperform the truncated Gaussian monocycle in the BER performance of binary TH-PPM systems for the same pulse durations. The POCS technique provides an effective method for designing UWB pulse shapes in terms of its inherent design flexibility and joint optimization capability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.159-164
• /
• 2005

When an optical pulse propagates through the atmospheric channel, the atmospheric turbulence attenuates and spreads this pulse. This attenuation and broadening of pulse are occurred by the fluctuation in the arrival time of pulse at the optical receiver. This pulse broadening induces the intersymbol interference (ISI) between the adjacent pulses. finally, the adjacent pulses are overlapped and the bit rate and the repeaterless transmission length are limited by the ISI. In digital communication system, therefore, the pulse broadening is more important factor than the attenuation. In this paper, thus, we find the ISI in the atmospheric turbulence as the function of the structure constant for the refractive index fluctuation that presents the strength of turbulence using the temporal momentum function and present it by numerical analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1755-1760
• /
• 2013

In this paper, when the pulses propagate on a uniform microstrip line, the distortion of pulse signal caused by dispersion is investigated in time domain. We analyzed dispersion characteristics according to dielectric constant and structure of transmission line, and compared propagating characteristics for square and gaussian pulse according to pulse width, pulse amplitude, and propagation velocity. The results of this paper are compatible to the trade-off determination of relative permittivity, substrate height, strip width and pulse width of signal pulse when a design of MIC and MMIC is necessary.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.459-463
• /
• 2002

We studied the effect of gain recovery at the optical fiber amplifier by the input pulse trains We also theoretically analyzed the limitation of the saturation and recovery time for the PDFA(Praseodymium-Doped Fiber Amplifier) which has the spectral gain at 1.3${\mu}{\textrm}{m}$ band. We can predict the interval between the pulse train, pump power, and the effect of the saturation and recovery time which is affected to the amplification of the optical pulse.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.505-508
• /
• 2002

We studied the effect of gain recovery at the optical fiber amplifier by the input pulse trains. We also theoretically analyzed the limitation of the saturation and recovery time for the PDFA(Praseodymium-Doped Fiber Amplifier) which has the spectral gain at 1.3${\mu}{\textrm}{m}$ band. We can predict the interval between the pulse train, pump power, and the effect of the saturation and recovery time which is affected to the amplification of the optical pulse.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.159-159
• /
• 2015

금속의 기계적 강화방법인 결정립미세화의 일종으로 미세한 쌍정을 도입하여 기계적강도를 향상시키면서 전기전도도는 감소시키지 않는 방안으로 nanotwin 구조의 Cu가 보고되고 있다. Nanotwin 구조는 FCC결정구조에서 특정 결정면을 [(111) mirror plane]을 기준으로 정합계면을 유지하면서 원자층의 배열이 역전되는 구조가 수~수십나노 수준의 간격으로 이뤄진 미세조직을 의미한다. 전해도금법을 이용한 nanotwin Cu의 형성방법으로는 pulse 파형을 사용하는데, pulse파형의 on time동안의 높은 전류밀도로 인해 발생한 도금층의 stress가 off time동안에 release되면서 nanotwin구조가 형성되는 것으로 보고되고 있다. Nanotwin형성 조건으로 보고된 pulse 도금 조건은 수에서 수십밀리초의 on time에 duty cycle($t_{on}/(t_{off}+t_{on})$)이 1/100~1/10 수준이다. 본 연구에서는 전기이중층의 이온고갈에 필요한 회복시간인 수에서 수십 밀리초 보다 짧은 시간인 마이크로 초($1{\mu}s$, $10{\mu}s$ 및 $100{\mu}s$)의 pulse 전류를 인가하였을 때에 발생하는 구리 도금층의 미세조직의 변화에 대해 알아보고자 한다.

• Korean Journal of Environment and Ecology
• /
• v.23 no.6
• /
• pp.553-563
• /
• 2009

This study was conducted to analyze the changes in the echolocation of Pipistrellus abramus according to environmental characteristics. The survey was conducted in the day-roosting site of P. abramus located in Gyeongju City (North Gyeongsang Province) from April to August, 2009. The environmental characteristics during the research were classified in six categories: the emergence time after sunset moving time from day roost to feeding areas; rice fields; forest edges; open spaces; and residential areas. Analysis results showed that there are differences in environmental characteristics and also differences between the moving time to the habitat and the moving time to capture preys. At the emergence time from day roost, Pipistrellus abramus used a FM signal with a short pulse-duration. In open spaces, however, they used a CF signal with a long pulse-duration. In different environmental situations, they used both FM and CF signals, although the types of pulse which they used were different. Except pulse-duration, there were significant differences in pulse-interval, peak-frequency, starting-frequency and ending-frequency between the movement among habitats and the movement to capture preys. Except the emergence time from day-roost, they showed a narrow band FM signal and a long pulse-duration that are suitable to search for insects by sensing echoes of insects when they moved among their habitats. When they were out to capture their preys, they showed a broad band FM signal and a short pulse-duration which enabled them to widely search and accurately locate their preys.

• Journal of Yeungnam Medical Science
• /
• v.12 no.2
• /
• pp.366-385
• /
• 1995

Epidemiological studies are important in both the prevention and treatment of mycobacterial infections. This study was initiated to establish the pulsed-field gel electrophoresis (PFGE) method, which are not yet extensively studied. The most apprpriate restriction endonucleases included DraI, AsnI, and XbaI. The optimal PFGE condition was different according to the enzymes used. Two stage PFGE was performed, in case of DraI first stage was performed with 10 seconds of initial pulse and 15 seconds of final pulse, while the second stage was performed with 60 seconds of initial pulse and 70 seconds of final pulse. The electrophoresis time for DraI-PFGE was 14 hours for each stage. Electrophoresis was performed for 22 hours, in case of XbaI, with 3 seconds of initial pulse and 12 seconds of final pulse. Electrophoresis was performed for 22 hours, in case of AsnI, with 5 seconds of initial pulse and 25 seconds of final pulse. In all cases the voltage of the electrophoresis was maintained constantly at 200 voltage. Standard mycobacterial strains, which included Mycobacterium bovis BCG, M. tuberculosis, and M. fortuitum, could not be differentiated by PFGE analysis. PFGE analysis was performed to differentiate 9 clinically isolated M. fortuitum strains using AsnI. All M. fortuitum strains showed different genotypes except 2 strains. Cluster analysis divided M. fortuitum strains into 2 large groups. PFGE analysis was performed to further differentiate M. fortuitum isolates using XbaI. The undifferentiated 2 M. fortuitum strains showed different PFGE patterns with Xba I. Cluster analysis of the XbaI-PFGE patterns showed more complex grouping than AsnI-PFGE patterns, which showed that XbaI-PFGE analysis was better than AsnI-PFGE in M. fortuitum genotyping. The top dissimilarity values of AsnI-PFGE and XbaI-PFGE were 0.74 and 0.75, respectively. This value was higher than that of arbitrarily primed polymerase chain reaction (AP-PCR) analysis and lower than that of restriction fragment length polymorphism (RFLP) analysis. This suggested that PFGE can be used as a supportive or alternative genotyping method to RFLP analysis.