• 동의생리병리학회지
• /
• 제20권1호
• /
• pp.83-87
• /
• 2006

The oriental medicine is necessary to the development of oriental medicine diagnosis, to satisfy the Senior-Friendly. We experiment on the elderly women in 3-D mac, and carry into effect the comparative-study on the youth's pulsation. The elder pulsation's division factor are analyzed press power, w/t, h5/h1 , dispersion of period. In the press power, the elder pulsation is shallow compared with the youth's pulsation. In the w/t (pressurization time / pulsation cycle), the elder pulsation is longer compared with the youth's pulsation, In the h5/h1 (dicrotic / main peak), the elder pulsation is small compared with the youth's pulsation. In the range of dispersion of period, the elder pulsation is narrow-changed compared with the youth's pulsation. Therefore the elder pulsation is characterized by the deficiency of flexibility and injection power.

• 센서학회지
• /
• 제22권1호
• /
• pp.38-43
• /
• 2013

In this study, the artery's compliance model and the pulsation waveform model was proposed to estimate blood pressure without applying HPF (High Pass Filter) on signal measured by the oscillometric method. The method proposed in the study considered two ways of estimating blood pressure. The first method of estimating blood pressure is by comparing and analyzing changes in pulsation waveform's dicrotic notch region during each cardiac period. The second method is by comparing and analyzing morphological changes in the pulsation waveform during each cardiac period, which occur in response to the change in pressure applied on the cuff. To implement these methods, we proposed the compliance model and the pulsation waveform model of the artery based on hemodynamic theory, and then conducted various simulations. The artery model presented in this study only took artery's compliance into account. Then, a pulsation waveform model was suggested, which uses characteristic changes in the pulsation waveform to estimate blood pressure. In addition, characteristic changes were observed in arterial volume by applying artery's pulsation waveform to the compliance model. The pulsation waveform model was suggested to estimate blood pressure using characteristic changes of the pulsation waveform in the arteries. This model was composed of the sum of sine waves and a Fourier's series in combination form up to 10th harmonics components of the sinusoidal waveform. Then characteristic of arterial volume change was observed by inputting pulsation waveform into the compliance model. The characteristic changes were also observed in the pulsation waveform by mapping the arterial volume change in accordance with applied cuff's pressure change to the pulsation waveform's change according to applied pressure changes by cuff. The systolic and diastolic blood pressures were estimated by applying positional change of pulsation waveform's dicrotic notch region.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.421-426
• /
• 2010

With hydraulic noise test facility, a variety of tests were performed to investigate the pulsation pressure generation mechanism and its transmission characteristics and to derive the noise control methodology. Many experiments were carried out by changing average pressure, flow rate, pump speed, hose length and MCV spool condition. From the test results, the correlations between pulsation pressure and other design parameters, such as static pressure, flow rate and MCV spool opening area and length of hose, were found out. And also each contribution factors were evaluated from the regression analysis. By changing hose length, the pulsation pressure resonance phenomenon was investigated. In order to find out the pulsation pressure reduction measures pulsation pressure analysis, such as pulsation pressure of hydraulic pump itself and pulsation pressure of hydraulic system, by using AMESim were studied. In addition hydraulic silencer was developed based on the Helmholtz resonator. And its performance was evaluated by installing the silencer at the excavator.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1143-1147
• /
• 2004

A mechanical type pulsation dampener for the diaphragm metering pump has been developed. The pulsation pressure is an inevitable phenomenon for the positive displacement pump such as cam operated or solenoid operated metering pump. The pulsation pressure of the metering pump could be the noise source and would be harmful for the piping system which delivers hydraulic fluid. Developed pulsation dampener consists of three coil springs which have different spring constant and height each other. Depending on pressure magnitude of the piping system, total hydraulic pressure on damping diaphragm which compresses coil springs will be varied. Force equilibrium of the pulsation dampener will be set by manual by adjusting the compressed coil spring height. During the discharge stroke, pulsation dampener stores potential energy that is released as the pumping diaphragm back to an initial position during the suction stroke.

• International journal of advanced smart convergence
• /
• 제8권1호
• /
• pp.106-112
• /
• 2019

Pulsation variance technique is blended the bumpy popple-sonance status of the brilliant-disparity understanding level (BDUL) on pulsation understanding gestalt. The understanding level condition by the pulsation understanding gestalt system is composed with the popple-sonance system. As to look for a two-node white-small dot of the brilliant situation, we are to take of the pulsation value with two-node white-small dot by the output signal. The concept of understanding level is composed the reference of brilliant-disparity level for variance signal by the pulsation sonance gestalt. Moreover indicating a bumpy variance of the BDUL of the maximum-minimum in terms of the popple-sonance gestalt, and pulsation two-node white-small dot sonance that was the a pulsation value of the far variance of the Pul-ug-FA-${\pi}_{MAX}$-MIN with $23.24{\pm}3.36units$, that was the a pulsation value of the convenient variance of the Pul-ug-CO-${\pi}_{MAX}$-MIN with $7.97{\pm}1.60units$, that was the a pulsation value of the flank variance of the Pul-ug-FL-${\pi}_{MAX}$-MIN with $3.02{\pm}0.47units$, that was the a pulsation value of the vicinage variance of the Pul-ug-VI-${\pi}_{MAX}$-MIN with $0.50{\pm}(-0.01)units$. The popple sonance will be to evaluate at the bumpy ability of the popple-sonance gestalt with two-node white-small dot by the pulsation understanding level on the BDUL that is indicated the brilliant-disparity gestalt by the understanding level system. We will be possible to suppress of a gestalt by the special signal and to utilize a pulsation data of popple sonance level by the popple understanding system.

• 한국광학회지
• /
• 제16권6호
• /
• pp.527-534
• /
• 2005

하나의 DFB 영역, 위상 조정 영역과 이득 영역으로 구성된 다중 전극 DFB 레이저의 pulsation 동작 특성을 살펴본다. Anti-phase (AP) complex-coupled (CC) DFB 구조를 사용한 경우가 in-phase CC DFB 구조나 index-coupled DFB 구조를 사용한 경우에 비하여 안정된 pulsation 동작이 발생하는 이득 영역과 위상 조정 영역의 전류 범위가 큼을 알 수 있다. AP CC DFB 구조를 사용한 경우 결합 세기가 커질수록, 이득 결합 계수가 커질수록 안정된 pulsation 동작이 발생하는 이득 영역의 전류 범위가 증가하고 pulsation 주파수의 튜닝 영역이 커짐을 볼 수 있다. 또한 위상 조정 영역의 위상 변화에 의한 pulsation주파수의 튜닝 영역도 커짐을 볼 수 있다. 고정된 결합 세기에서 DFB 영역의 길이가 증가할수록 pulsation 동작이 발생하는 위상 조정 영역과 이득 영역의 전류 범위가 증가하여 pulsation 주파수 튜닝 영역이 넓어짐을 볼 수 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권6호
• /
• pp.687-693
• /
• 2007

It has been known that one of the main obstacles of improving the performance of positive displacement hydraulic turbine is pressure pulsation which occurs at the regions upstream and downstream of the turbine. In order to suppress the pressure pulsation. occurrence reason of the pressure pulsation should be understood in detail Therefore. this study aims to establish a CFD analysis method by which the phenomena of unsteady pressure pulsation can be examined with high accuracy. Internal flow field of the turbine is modeled simply to generalize the relation between the pressure pulsation and internal flow. The results show that the Present CFD method adopting unsteady calculation can be applied successfully to the analysis of the Phenomena of Pressure Pulsation. Occurrence of the Pressure pulsation is due to the difference of the rotational speed of turbine rotors When driving rotor rotates by uniform speed and fellowing rotor rotates by variable speed, very large Pressure pulsation occurs within the turbine periodically.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권4호
• /
• pp.286-292
• /
• 2011

In order to design a shear coaxial injector of solid particles for underwater propulsion system, basic experiments on gas-liquid shear coaxial injector are necessary. In the gas-liquid coaxial injector self-pulsation usually occurs with an intense scream. When self-pulsation occurs, mass flow rate oscillation and intense scream are detected by the interactions between the liquid and gas phase. Self-pulsation must be suppressed since this oscillation may cause combustion instabilities. Considerable research has been conducted on self-pulsation characteristics, but these researches are conducted in swirl coaxial injector. The main objective of this research is to understand the characteristics of self-pulsation in shear coaxial injector and reveal the mechanism of the phenomenon. Toward this object, self-pulsation frequency and spray patterns are measured by laser diagnostics and indirect photography. The self-pulsation characteristics of shear coaxial injector are studied with various injection conditions, such as the pressure drop of liquid and gas phase, and recess ratio. It was found that the frequency of the self-pulsation is proportional to the liquid and gas Reynolds number, and proportional to the L/d.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권8호
• /
• pp.947-953
• /
• 2007

Occurrence of pressure pulsation in positive displacement hydraulic turbine is one of the principal problems which should be cleared to improve the turbine performance and to put the turbine to practical use. Therefore, present study is tried to examine the occurrence mechanism and characteristics of the pressure pulsation CFD analysis and experimental measurement are implemented in this study to clarify the phenomena of unsteady pressure pulsation. The results show that occurrence reason of the pressure pulsation is not only due to a series of opening and closing of the chamber formed between rotor and casing wall but also due to the variation of rotational speed of following rotor. The pressure pulsation causes torque variation and the curve patterns of the torque variation conforms to that of the pressure pulsation. Pressure in the chamber is equal to the averaged value of inlet and outlet pressures. Sudden pressure decrease by accelerated through-flow between lobe and casing wall results in torque loss.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.667-669
• /
• 2014

Development of 3 cylinder turbo charger engine is increasing due to engine down-sizing, cost reduction and emission regulations. However, 3 cylinder engine makes higher Exhaust manifold gas pressure(P3) pulsation than 4 cylinder engine and it generate boosting air with high pulsation. The mechanical waste-gate turbocharger just controlled by the boosting air has higher movement because of this high pulsation boosting air. This causes high vibrations to wasted gate and accelerate wear of the linkage system. So we need to understand out of the exhaust gas pressure pulsation changed by turbocharger compressor pressure(P2) Pulsation. In this study, we discuss how to prevent to abnormal movement of the turbo actuator by stabilized P2 Pulsation.