• 대한소아치과학회지
• /
• 제41권2호
• /
• pp.174-179
• /
• 2014

치내치란 치아 조직의 석회화가 일어나기 이전에 법랑기가 치유두 내로 함입되어 나타나는 발육성 이상을 말한다. 치내치는 임상적, 방사선학적으로 다양한 변이를 나타내며, 치내치의 여러 분류법 중 Oehlers(1957)가 제안한 분류법이 가장 널리 이용되고 있다. 치수는 건강한 채로 남아 있으나 함입부가 치주염과 연관된 Type III 병소를 치료하는데 다양한 술식들이 설명되어져왔다. 가장 우선시 되어야 하는 목표는 가능하다면 치수를 건전하게 보존하는 것이며, 치수질환의 명백한 증거가 없다면, 함입부를 치근과 별개로 치료하는 보존적인 접근법이 필요하다. 그러나, Type III 치내치의 근관치료는 근관과 함입의 충분한 잔사제거, 재현가능한 근관장의 조절, 일관된 충전등을 충분히 달성하기 어렵다는 문제점이 있다. 본 증례는 치근단 병소를 보이는 Type III 치내치의 치료에 함입부에만 제한된 보존적 근관치료 및 Mineral Trioxide Aggregate(MTA)를 이용한 폐쇄를 통해 양호한 결과를 얻었기에 보고하는 바이다.

• Imaging Science in Dentistry
• /
• 제53권2호
• /
• pp.91-99
• /
• 2023

Purpose: This systematic review aimed to investigate the correlation between chronological age and dental pulp volume in cone-beam computed tomography (CBCT). Materials and Methods: The literature was searched in 4 databases(PubMed, Scopus, Web of Science, and Google Scholar). Within each study, the outcome of interest was the correlation (r) between chronological age and pulp volume. A random-effect meta-analysis was conducted. Subgroup analysis was carried out according to sex and tooth type. Results: Of 5,693 identified studies, 27 fulfilled the inclusion criteria and were selected for meta-analysis. These articles focused on single-rooted teeth (n=21), multi-rooted teeth (n=6), maxillary teeth (n=14), mandibular teeth (n=6), and maxillary and mandibular teeth (n=12). The relationship between chronological age and dental pulp volume was examined in the entire population (r= -0.67), men (r= -0.75), and women (r= -0.77) in single- and multi-rooted teeth. The results of the total population analysis showed a relatively strong negative relationship between age and pulp volume. Conclusion: This study suggested that CBCT is a reliable and repeatable tool for dental age estimation. A strong inverse relationship was observed between pulp chamber volume and age. Further studies on the correlation between chronological age and pulp volume of multi-rooted teeth may be beneficial.

• 펄프종이기술
• /
• 제42권1호
• /
• pp.20-25
• /
• 2010

Fractionation effects of the slot-type and the hole-type screens of mutifractors were studied using a pilot multifractor. We used a slot screen of 0.15 mm, and two hole screens of 1.0 and 2.0 mm, respectively, in the study. We found hole-type screens were more effective for fractionation of fiber furnishes according to their fiber lengths. Slot-type screen was more effective to remove the shives from the accepted fiber furnishes. There existed a high regression coefficient between the fiber length differences and the freeness differences of the accepted and the rejected fiber furnishes.

• 펄프종이기술
• /
• 제30권4호
• /
• pp.69-78
• /
• 1998

Papers loaded with 10-40% $TiO_2$ by dry weight were calendered under the various combinations of calendering conditions such as calender type, linear pressure, and roll temperature. After being calendered, light scattering coefficient, surface roughness, density, and tensile strength of the papers were measured and the results were summerized as follows: 1. To increase the light scattering coefficient of $TiO_2$-highly-loaded paper further by calendering, the calender roll pressure and temperature should be kept low. Under these conditions, the physical strength of the paper was not significantly affected. 2. At low roll temperature, soft nip calender and machine calender type showed the same relationship between paper density and its roughness. At high roll temperature, soft nip calender type gave much lower roughness than machine calender type at the same density. 3. At high roll temperature of both calenders, the density as well as the tensile strength of the TiO$_2$-loaded paper was increased significantly.

• 펄프종이기술
• /
• 제44권5호
• /
• pp.39-45
• /
• 2012

For a fundamental study for high concentration pigment coating, the effects of alkali swellable emulsion (ASE) type rheology modifier and surface adsorption emulsion (SAE) type rheology modifier on both the stability and the viscoelastic behavior of a coating color were elucidated. The coating color prepared with SAE type rheology modifier showed superior thermal and mechanical stability than that with ASE type. In the high concentration and high speed coating process, the mechanical stability of a coating color was a key parameter since both impact force and shear force were increased with the increase of coating color concentration and coating speed, respectively.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.338-342
• /
• 1999

It has been proven in previous work that rosin sizing agents are distributed relatively homogeneously on the outer surface of paper. Therefore, rosin sizing agents on paper surfaces can be characterized by macro domain measurement techniques with very thin layer from the surface. In this work, the role of rosin sizing agents on paper surface was investigated by comparing wettability from contact angle measurement with the chemical state of the outermost surface by the ESCA. Furthermore, the role of rosin on the surface of paper was discussed by the quantity of hydroxyl groups obtained from chemical modification with the TFAA-ESCA technique. It was found from the ESCA data that the fixing mechanism with soap-type rosin sizing is different from that with emulsion-type rosin sizing.

• 대한치과의사협회지
• /
• 제22권5호통권180호
• /
• pp.423-427
• /
• 1984

A total of 114 extracted human mandibular first molars were used to study the configuration of the floor of the chamber. The specimens were ground and the pulp chamber was examined with a magnifier and explored with sharp explorer. The study showed the shape of the pulp chamber, number of root canals, and the type of canal orifice. The results were as follows; 1. In so far as observing the shape of the pulp chamber of the teeth, 58.8% of the teeth were square, 34.2% were triangle and 7.0% were ovoid shape. 2. 58.8% of the specimens have 4 root canal orifices, 34.2% have 3 root canal orifices, 7.0% have 2 root canal orifices. 3. 41.2% of the specimens show 'H' shape, 17.6% show 'Square' shape, 31.6% show 'T' shape, 2.0% show 'reverse-T' shape and 7.0% show 'I' shape.

• 펄프종이기술
• /
• 제36권3호
• /
• pp.67-73
• /
• 2004

Effect of calendering on structural and surface properties of sheets made of various pulp was investigated. BKP, BCTMP and KOCC were used as raw materials for handsheets and sheets were calendered at the different calendering temperature and pressure conditions. Caliper, air permeability, and PPS roughness were reduced by calendering, but their effects were a little different depending on pulp type and calendering condition. Increase of density with increase of calendering Pressure was remarkable on sheet made of BCTMP or KOCC, and the effect of temperature was more significant than pressure. PPS roughness of sheet made of BCTMP or KOCC was reduced by calendering, but BKP sheet showed little reduction of roughness at higher calendering pressure. The compressibility of sheet increased logarithmetically with calendering pressure and surface compressibility of KOCC sheet was relatively higher than other pulps.

• Restorative Dentistry and Endodontics
• /
• 제12권1호
• /
• pp.165-169
• /
• 1986

A total of 114 extracted human mandibular 2nd molars were used to study the configuration of the floor of the chamber. The specimens were ground and the pulp chamber was examined with a magnifier and explored with sharp explorer. The study showed the shape of the pulp chamber, number of root canals, and the type of canal orifice. The results were as follows, 1. In so far as observing the shape of the pulp chamber of the teeth, 47.4% of the teeth were square, 42.9% were triangle and 9.7% were ovoid shape. 2. 35% of the samples had 2 root canal orifices, 62% had 3 root canal orifices, 3% had 4 root canal orifices. 3. 3% of the specimens showed 'H' shape, 5% showed 'Square' shape, 51% showed 'T' shape, 1% showed 'reverse-T' shape, 35% showed 'I' shape and 5% showed the specific 'C' shape.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.455-458
• /
• 2006

The oak and pine charcoal were used to develop the internal packaging raw material for maintaining the freshness of vegetables and fruits, and to investigate the possibility in the application for pulp mold packaging. The effects of the charcoal type, species, particle size, and grammage on the adsorption efficiency of ethylene gas were studied. White charcoal has superior ethylene gas adsorption performance to those of black charcoal. Pine charcoal was superior to oak charcoal in the ethylene gas adsorption. Higher gas adsorption was obtained by the higher grammage sheet. The difference in the adsorption efficiency was not significant between ONP and KOCC.