• 펄프종이기술
• /
• 제30권2호
• /
• pp.5-12
• /
• 1998

Exploitation of the papermaking technology to reduce the strength loss that accompanies when using recycled papers as raw materials for papermaking is one of the most important issues imposed upon today's paper industry. Multi-layer sheet forming technology has been suggested as a way that provides some answers to this issue. In this study strength properties of single- and two-layer handsheets formed with recycled fiber and unbleached softwood kraft pulp have been examined to quantify the benefits when using two-layer sheet forming technology rather than a conventional single layer sheet forming precess. Single- and two-layer handsheets were made from 50% of OCC and 50% of Sw-UKP and their strength properties were evaluated. Also the strength properties made from Sw-UKP and OCC sheets were determined. A multihead, which can be attached on the top of hand- sheet former, was used to form two-layer sheets. Maximum strength properties could be obtained in the freeness range of 500∼300mL CSF for Sw-UKP Most of the strength properties was reduced by 30∼35% when 50% OCC was blended with UKP. Decrease of strength properties, however, could be reduced by employing a two-layer sheet forming method. Creator strengths could be obtained when UKP was positioned at the top layer of two layered sheets indicating greater UKP fines retention due to the filtration effect of the OCC layer formed prior to UKP layer contributed the strength improvement. Two-layer sheet showed lower Scott internal bond strength than single layer sheet. By incorporating some of UKP fibers into OCC layer this reduction could be reduced.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2004년도 춘계학술발표논문집
• /
• pp.40-48
• /
• 2004

Paper tube industry for synthetic fiber packaging has approximately 200 billion won of market size in Korea, while any significant research has not done yet about physical characteristics of paper tubes. This study was conducted to find out a adequate structure of paper tubes by changing compositions of paperboards, size of tubes, and makers. Parallel compression strength was not only rely on compositions of paperboards, but also largely impacted by structural design of paper tubes.

• 펄프종이기술
• /
• 제31권3호
• /
• pp.19-25
• /
• 1999

Effects of the process variable in Condebelt press drying including drying temperature, pressure , drying time, and moisture content of the sheets on the paper properties were examined. The experiment was performed with a static rig and Korean OCC was used as raw material. Significant improvement in sheet density, compression strength, tensile strength, surface smoothness ,etc. was obtained when condebelt drying was applied. Control of pressure and inlet dryness was found to be two most critical variables in improving sheet properties.

• 펄프종이기술
• /
• 제48권2호
• /
• pp.99-105
• /
• 2016

The increase of wet web solid content after wet press and dry compressive strength were observed in lab study by judicious application of wood flour and starch for the old corrugated container (OCC). Pearl starch was better than cationic starch in strength development, but cationic starch was better for drainage. Application of vacuum on the mixed solution of wood flour and starch helped strength development further without loss of other properties. The effect of wood flour addition on wet web solid content improved as the wet pressing pressure increased. The use of wood flour and starch mixture improved wet web solid contents further.

• 펄프종이기술
• /
• 제37권5호통권113호
• /
• pp.63-69
• /
• 2005

This study was performed to introduce recently developed polyvinylamine as a wet-end process and paper strength improving aids. As a retention and drainage aids, high cationic charged polyvinylamine was more effective at the BCTMP and ONP stock condition than LBKP stock condition. As a dry tensile strength aid, dual system of polyvinylamine with anionic polyacrylamide was the best at the LBKP or ONP stock conditions. On the other hand, polyvinyl amine alone was better than dual system of polyvinylamine with anionic polyacrylamide at the BCTMP condition. As a wet tensile strength aid, polyvinylamine single system and dual system of polyvinylamine with anionic polyacrylamide were good at LBKP, BCTMP and ONP stock conditions. However, poly(aminoamide)-epichlorohydrin resin was good at LBKP and ONP stock conditions but efficiency of poly(aminoamide)-epichlorohydrin resin was remarkably decreased at BCTMP stock condition.

• 펄프종이기술
• /
• 제39권3호
• /
• pp.12-23
• /
• 2007

Frequently spraying of natural starch slurry onto the formed wet web has been adopted to improve properties of paperboards. This conventional starch spraying technique, however, becomes less effective in strength improvement. In this study the effects of various factors including wet web dryness, quantity of starch slurry sprayed, and drying temperature on paperboard properties were investigated. Migration of starch granules into the webs appeared to cause a reduction in plybond strength when the web dryness was lower than this level. Wet webs should contain enough water to swell the starch granules, and at the same time they should be heated to a temperature high enough for complete cooking of the sprayed starches to occur. This suggested that preheating of the wet web can be employed to improve the plybond strength.

• 펄프종이기술
• /
• 제48권1호
• /
• pp.61-66
• /
• 2016

In order to improve the bonding efficiency of starch adhesives and water resistance of corrugated board, mixing ratio of additives dosage was changed and its effects were analyzed. When the additives dosage was increased, bonding strength, vertical compression strength, bursting strength and water resistance were increased, because of hydroxyl groups or acetyl groups in starch adhesives and cellulose fibers of corrugated board were cross-linked by additives. When 1.0% glyoxal dosage was added, flat crush strength and vertical compression strength were increased. With 1.5% glyoxal, bonding strength and bursting strength were increased. However, 2.0% glyoxal dosage was added, most of strength except bursting strength were decreased. Thus, when the appropriate amount of additives are added during corrugated board production process, increased bonding efficiency of starch adhesives and higher water resistance of corrugated board can be achieved.

• 펄프종이기술
• /
• 제36권5호
• /
• pp.21-28
• /
• 2004

Com stalk was evaluated to verify the potential as a raw material for papermaking. The lower lignin content and higher hemicelluloses content of cornstalk than any woods were considered to be beneficial for pulping and strength properties of paper. The average fiber length of com stalk was similar to those of hardwood, but longer fiber fraction is little bit included. It was found that the refining of pulp can be eliminated because of higher hemicelluloses content and narrower fiber characteristic. Disadvantages of cornstalk pulp were lower bulk and opacity, but it can be overcome by the proper use of wood pulp and filler.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2003년도 추계학술발표논문집
• /
• pp.17-26
• /
• 2003

Nalita wood(Trema orientalis) is one of the fastest growing woods in the world. It may be a viable species for pulpwood. The physical, chemical and morphological properties of Nalita were studied. The total lignin, pentosan and holocellulose content in Nalita wood were 24.7%, 22% and 81.2%, respectively. Its fiber length was about 0.92 mm, which are comparable to Acacia mangium. Nitrobenzene oxidation of Nalita wood meal indicated that the guaciayl and syringyl unit were the major constituent of Nalita lignin. Nalita produced 50% pulp yield at Kappa number 21 in soda-anthraquinone process. The strength properties of Nalita pulp were comparable to other tropical hardwood pulp. At $40_{\circ}$ SR, the breaking length, burst index, tear index and total energy absorption were 6000 m, $3.5kPa{\cdot}m^2/g\;and\;7.0mN{\cdot}m^2/g\;and\;75J/m^2$, respectively.

• 펄프종이기술
• /
• 제42권1호
• /
• pp.48-53
• /
• 2010

Commercial micro pulps(Arbocel) were coated with three kinds of polymers using spray method. These coated micro pulps were used to papermaking additives to evaluate retention, drainage and physical properties of paper. The retention and drainage were improved with addition of polymer coated micro pulp. The bulk index of paper was also increased, but tensile and tear strength were decreased slightly, probably due to weakening of internal bonding. These results showed that the use of polymer coated micro pulp was an effective method to improve retention, drainage and bulk index of paper.