• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.3
• /
• pp.70-78
• /
• 2012

For evaluating the printing suitability of electronic copying papers in the aspect of climate conditions, 12 samples of copying papers being generally used in Korea and worldwide were collected. The copying papers were controlled by various temperature and humidity options in conditioning equipment in order to simulate the specific circumstances of dry, temperate or tropical climate, and the pre-heating system of photocopying machines during printing. As results, some copying papers showed several physical problems, especially in recycled copying papers and a normal paper with original printing faulty. These problems of copying papers were mostly resulted in extremely high moisture circumstance, and in lower levels of tensile strength and tensile stiffness. The moisture contents of copying papers during passing through the pre-heater system of photocopying machine could be rapidly decreased because paper is exposed to high temperature around the pre-heating zone. The copying paper, for example of XR3 sample, containing low moisture contents below 2% had high exfoliating possibility of toner transfer from copying paper.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.73-79
• /
• 2011

The annals of Joseon Dynasty is one of the UNESCO's Memory of the World Register. For the safety preservation of wax applied volumes of the annals of Joseon Dynasty, the aging behavior of beeswax and beeswaxed Hanji with $CO_2$, $O_3$, $SO_2$ and $NO_2$ gas has been evaluated. The weight loss of beeswaxed Hanji after aging under ozone gas were increased because of strong acidity of ozone. The acid value and relative intensity of carbonyl groups in beeswax were stabilized with aging time. The physical strength of dewaxed Hanji after ozone aging were rapidly decreased by aging time. The crystallinity of dewaxed Hanji were stabilized at all aging times.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.1
• /
• pp.37-42
• /
• 2012

This study was carried in order to manufacture the high quality coated paper. High quality includes not only physical and optical properties of coated paper but also final print quality. In this study, new acrylic-styrene emulsion was polymerized in laboratory and compared with conventional styrene-butadiene latex. Low-shear viscosity of coating color was decreased with increasing acrylic-emulsion dosage. Small amount of acrylic emulsion addition increased water retention, but further addition decreased it. Acrylic-emulsion addition improved paper gloss, brightness and whiteness, but decreased PPS and opacity slightly. Ink gloss was increased with using No. 3 acrylic-emulsion due to lower ink setting properties. However No. 1 and 2 emulsion showed the opposite result. Surface strength of coated paper was increased with using No. 3 acrylic-emulsion. These results indicate that high quality coated paper can be manufactured with using No. 3 acrylic-emulsion.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.1
• /
• pp.31-36
• /
• 2012

In the previous study, the possibility of modifying the surface properties of base paper with plasma treatment was evaluated. It was shown that only the hydrophilic properties of the base paper surface was increased while there was no changes in physical and optical properties. Only the surface of the plasma treated side was modified. In this study, the effect of plasma treatment on binder migration was elucidated. The base paper was plasma treated with various voltage and then the plasma treated base papers were coated with varying coated weight. The surface strength of the coated paper (dry and wet pick) was increased with plasma treatment, which implies that the plasma treatment of base paper can inhibit the binder migration.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.2
• /
• pp.13-20
• /
• 2013

In this study, two biodegradable polymer(PLA, PBS) emulsions were treated on agricultural packaging paper such as fruit bagging paper. Water-repellency, mechanical properties, and SEM image with thermal aging were measured on the emulsion treated fruit bagging paper. Biodegradable polymers(such as poly lactic acid, poly butylene succinate) emulsion treated fruit bagging paper had higher water-repellency and strength than other water-repellent(such as acrylic repellent, linseed oil and paraffin wax) treated fruit bagging paper. According to FE-SEM results of polymer emulsion coated fruit bagging paper, the colloidal particles of emulsion after thermal treatment (looks like being) were adhered to the fibers. Thus, using biodegradable polymer emulsion is expected to protect a fruit for a long time.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.2
• /
• pp.46-51
• /
• 2003

The charcoal is known to have gas adsorption capability and is used frequently to mitigate the unpleasant smells from food and clothing. It is also used to treat water to remove dissolved organic and inorganic substances. In this paper, we applied the several different kinds of charcoals to the papers in three different ways to investigate if charcoal application method affects its gas adsorption capability. Wet end addition, making multiply, and coating method were tested. Specific ethylene gas adsorption capabilities were measured. Experimental results shows that manufacturing conditions of the charcoal itself changed its gas adsorption properties. The boxes used for agricultural produces, and the packaging paper for flowers are to be well fitted application for the charcoal added paper. Mulch paper, which needs opacity and air permeability with proper strength properties, is another candidate for the application of charcoal added paper.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.3
• /
• pp.46-52
• /
• 2002

To produce the raw material used for printing and writing paper or high quality tissue, MOWs that were consisted of white ledger, colored ledger and old newspaper were bleached with EoP and EoPY(FAS) method, the EoP bleaching process gave the improvement in brightness and a high color removal efficiency. Especially, MOW B(initial brightness: 59.1％ ISO) that contained much old newspaper showed the higher bleaching efficiency than those of MOW A(initial brightness: 68.3%). After EoPY(FAS) bleaching, MOW's brightness was increased from 68.3% ISO to 84.3∼84.0% ISO, and from 59.1% ISO to 78.7∼79.2% ISO, respectively. Also the tensile and burst index of bleached pulps decreased by 10∼30%. The tear index slightly decreased or halted at the same range as unbleached pulps.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11b
• /
• pp.61-69
• /
• 1999

Contaminants such as fatty acids, triglycerides, resin acids and foam collected from a high yield sulfite weak liquor storage tank lowered the water surface tension and reduced inter-fibre bonding but also tended to benefit sheet opacity. Some common wet end additives such as defoamers and dispersants gave similar results. Lignosulfonate and naphthalene sulfonate showed little if any negative effect on both surface tension and sheet strength properties. Among the natural wood extractives. fatty acids were identified to be most detrimental followed by triglycerides and then resin acids. In order to alleviate the detrimental impact of these contaminants, membrane separation, air floatation and ozone treatment were carried out on paper machine white water samples. The effect of these treatments on removal of fatty and resin acids was quantified by a GC-Mass analysis. Reverse osmosis with a 1000 molecular weight cut off membrane failed to totally reject fatty and resin acids, but markedly reduced losses of sheet properties due to contaminants. Ozone treatment resulted in a significant increase of the surface tension and air floatation was considered to be a practical and useful method for removing fatty and resin acids from the machine white water.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.6
• /
• pp.139-146
• /
• 2015

We manufactured natural dyed Korean traditional paper (Hanji) for cultural properties conservation and storage with goldthread (Coptis chinensis) and silver nitrate ($AgNO_3$). Goldthread and silver nitrate are known to be an excellent antimicrobial activity. The effect of content of goldthread and silver nitrate on properties of dyed Hanji was investigated. Color strength of dyed Hanji decreased with increasing content of silver nitrate. After-mordanting with 3% silver nitrate improved lightfastness of dyed Hanji. Tannic acid treatment increased K/S value of dyed Hanji. As the amount of the increase in goldthread content was reduced silver nitrate content. Sim-mordanting method was used for simplifying manufacture process. Silver nitrate sim-mordanting method increased K/S value of goldthread than after-mordanting method.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.6
• /
• pp.130-138
• /
• 2015

This study was conducted to investigate the effect of the strengthening treatment of methyl cellulose (MC) on properties and aging characteristics of the dewaxed papers during humid heating aging. Beeswax-treated Hanji was dewaxed by the supercritical fluid extraction method, and subsequently the strengthening treatment was performed with MCs having three different viscosities. MC was first applied by dipping a dewaxed paper into a MC solution whose concentration was controlled from 0.5% to 1.5%. After the strengthened papers were artificially aged at $80^{\circ}C$ and 65% RH, the changes in optical and mechanical properties of the samples were evaluated. The results show that viscosity and especially pick-up of MC influenced the strengthening efficiency and aging characteristics of dewaxed paper. Strength was increased with the MC coating weight; in addition, strengthening with MC improved preservability of the dewaxed paper. The optimum conditions for the strengthening with MC was found to be the coating ratio of 4% with 1500 cP MC.