• 펄프종이기술
• /
• 제45권4호
• /
• pp.52-64
• /
• 2013

This study was carried out to investigate the characteristics of starch paste which was used for the conservation of paper properties. Three kinds of commercial corn starch and five kinds of fermented wheat starch were examined on the contents of amylose and amylopectin, shapes of particles, and viscosity and pH of paste. And adhesive strength on the drying, accelerated aging, and wetting treatments were measured. The contents of amylopectin of oxidized corn starch were higher those of cationic corn starch, unmodified corn starch, and fermented wheat flour. In case of fermented wheat flour, increasing of a fermentation period was resulted in increasing of amylopectin contents. The particle shapes of commercial corn starch showed with a uniform polygon, but fermented wheat flour showed with a mixture of small and large oval types. The viscosity of oxidized corn starch were very lower those of cationic corn starch and unmodified corn starch. And increasing of a fermentation period of wheat flour was resulted in increasing of viscosity. The pH of commercial corn starch were 3.6-7.5 and fermented wheat flour were 3.6-5.2. Through the examination on the nature and adhesive strength of starch paste, the oxidized corn starch 60 cps which is the name of products and wheat flour which had fermented for 5 years were considered that most suitable for conservation of paper properties.

• 펄프종이기술
• /
• 제40권4호
• /
• pp.34-42
• /
• 2008

Generally, paper multilayering was performed before wet pressing process. However, sheets whose characteristics are different could be put together at the dry state by adhesives for the specialty paper products. In this paper, potential adhesives such as PVAc, oxidised starch, latex, and PVA were chosen and multilayering of several sheets was performed in laboratory scale. The effects of base paper properties and the composition of adhesives on the physical properties of multilayering paper were investigated. Physical properties such as bonding strength and stiffness were measured. For the practical reasons, mill trial was also executed. According to the result of laboratory tests and mill trial test, the physical properties of multilayered paper were greatly affected by the composition of adhesives and it was found that PVAc showed the best performance in all its aspects among four adhesives. Oxidised starch had an advantage of high stiffness and PVA gave high bonding strength to the multilayered paper. And it was also found that the properties of base paper showed the great influences not only on multilayering process, but also on the physical properties of the multilayered paper.

• 펄프종이기술
• /
• 제39권3호
• /
• pp.70-76
• /
• 2007

The raw oriental lacquer produced in China was used in this study. This lacquer was diluted with ethanol and terpene in different solvent ratios. The diluted lacquer in the solvents had two layers. The upper layer was solvent soluble and the lower contained precipitates. Hanji was treated with the solvent solubles and the mixture containing precipitates, and then properties of the Hanji were evaluated. The average weight, thickness, and density of Hanji treated with oriental lacquer tended to gradually be decreased as the lower concentration of lacquer was used and as the solvent soluble was treated. Tensile strength of the treated Hanji decreased when the diluted lacquer was used and Hanji treated with terpene dilution at the ratio of lacquer to solvent of 1:5 (v/v) showed higher tensile strength than ones treated with ethanol dilution. The folding endurance decreased as the less concentrated lacquer was used and the highest value was obtained when 1:40 (v/v) of lacquer to solvent ratio in both ethanol and terpene mixture. Absorption ratio was higher in the Hanji treated with ethanol mixture, treated with the lacquer in lower concentration, and treated with ethanol mixture. Hanji treated with ethanol dilution at 1:20 (v/v) and the lower ratio of lacquer to solvent showed a hydrophobic property. Amount of the bound dye materials tended to be decreasing as the concentration of lacquer became lower and it was higher in Hanji treated with ethanol mixture than with terpene mixture.

• 펄프종이기술
• /
• 제40권1호
• /
• pp.29-34
• /
• 2008

The charcoal has been used not only as fuel but also as human health care material since it was used. Charcoal's performances were generally investigated in aspects of energy efficiency and caloric values. This study was conducted in order to increase charcoal's application area and to develop functional paper. Five types of charcoal were used on a basis of gas absorption properties from previous study. Handsheets were made by two methods by internal loading and surface spray on interlayer. Strength properties of internal loading and interlayer spray handsheets were decreased as the charcoal loading increased. Ethylene gas absorption property was higher in both of oak's black charcoal and white charcoal than others. In terms of strength, 5-10% charcoal loading was efficient. Above 10% loading, a rate of strength decrease was higher than that of ethylene gas absorption rate. Formaldehyde absorption property was higher at both of oak's black charcoal and mixed charcoal than others. However, to guarantee enough charcoal loading should be higher than 95 $g/m^2$ for sufficient formaldehyde absorption.

• 펄프종이기술
• /
• 제45권6호
• /
• pp.10-16
• /
• 2013

This study aims to carry out the final evaluation on the deterioration stability of dewaxing and strengthening treatments devised to conserve and restore the beeswax-treated volumes of the Annals of the Joseon Dynasty. Thus, this study artificially deteriorated dewaxed Hanji, strengthened Hanji and beeswax-treated Hanji with optimized processing conditions applied, and comparatively analyzed the deterioration characteristics of each kind of Hanji. As a result of this study, it turned out that there was the loss of physical strength and the value of $L^*$ was increased and the values of $a^*$ and $b^*$ were decreased from removing beeswax after dewaxing by supercritical fluid extraction (SFE). Also deteriorated strength during dewaxing was reinforced by strengthening treatment with methylcellulose and it showed higher strength than beeswax-treated Hanji. From the evaluation on deterioration stability after dewaxing and strengthening, it turned out that deterioration stability of strengthened Hanji is the superior. Therefore, it is presumed that conservation of aged beeswax-treated Hanji can be improved and extended when dewaxing and strengthening are applied under optimum conditions.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.271-278
• /
• 2006

We used polymers of alternating cationic and anionic nature to build up shells on fiber surfaces, strengthen the worn-out fibers and improve paper properties made from such fibers. OCC and ONP pulps were either dipped or salted out in the cationic polyallylamine, polyacrylamide and starch solutions. After centrifugal drying, these were followed by treatments in anionic polyacrylic acid, poly-acrylamide, and starch solutions, respectively. The shell-enhanced fibers were formed into handsheets and their physical properties evaluated. The results show that building multiple shells on worn-out fiber surfaces can strengthen the fibers and paper. The simpler and more practical impregnation-centrifuging treatment provided the desired effects, whereas salting out the polymers produced somewhat superior fibers. The latter process, were impractical, however. The first pair of polymeric shells imparted marked strength improvement, whereas later layers had diminishing efficacies. Overall, the methods can improve fiber quality, attaining paper strength requirements without resorting to expensive measures. Alternate cationic polymer and filler powders were also deposited on fiber surface based on the micriparticle system in an anticipation of stiffness gains. Platy minerals, such as montmorillonite, bentonite, sericite, clay and talc were added following cationic PAM. After dewatering of polymer-pigment shelled fiber of one to 3 pairs of layers, handsheets either calendered or uncalendered were evaluated. The results indicate that regardless of calendaring, stiffness of the handsheets did not improve appreciably while certain other strength properties showed gains. We also attempted the novel starch gel filler addition method wherein tapioca starch and filers (PCC, sericite or clay) were mixed at high solids content of 50% and cooked until gelatinized. The filled handsheets were dried under various conditions and then tested for their properties. Improvements in strengths of modified filled paper were observed.

• Journal of the Korean Wood Science and Technology
• /
• 제32권1호
• /
• pp.1-8
• /
• 2004

생장속도가 빨라서 단위면적당 Biomass의 생산량이 많은 어저귀(Indian mallow, Abutilon avicennae G.)를 원료로 하여 펄프화하였으며, 제조한 한지의 물리적·기계적·현미경적 특성에 관하여 비교 검토하였다. 제조한 한지의 특성을 살펴보면 광학적, 강도적, 현미경적인 특성에서 설포메틸 펄프화법이 우수한 결과를 나타냈고, 장섬유인 인피부 펄프에 대한 단섬유인 목질부 펄프의 혼입량 증가에 따른 변화에 있어 지질(밀도, 백색도, 불투명도, 지합)의 변화는 점차 증가했으나, 강도는 감소하는 경향을 나타냈다.

• 대한소아치과학회지
• /
• 제50권4호
• /
• pp.443-451
• /
• 2023

The purpose of this study was to evaluate whether the newly introduced calcium silicate-based materials with fast-setting properties could be appropriately used as basement materials in indirect pulp treatment (IPT). This was performed by quantifying the durability of adhesion between the material and composite resin, measured by the shear bond strength (SBS). Five calcium silicate-based materials, TheraCal LC^® (TLC), TheraCal PT^® (TPT), TheraBase^® (TB), Well-Root^TM PT (WPT), and Endocem^® MTA (EMTA), as well as two glass ionomer-based materials, Fuji II and Fuji II LC, were included. Specimens containing these materials were manufactured and bonded to composite resin with a universal adhesive applied in self-etch mode. The SBS values and failure modes were recorded, and the mean SBSs of the materials were compared. Both TPT and TB exhibited SBS values that were similar to TLC, while both WPT and EMTA appeared to have statistically lower SBS values. Mixed failure was commonly observed in TLC and TPT, while all WPT and EMTA samples showed cohesive failure. In comparison with TLC and TPT, more samples with cohesive failure were observed in TB, implying that this material forms a stronger bond with composite resin. Together with the ability of TB to chemically bind to dentin due to its 10-methacryloyloxydecyl dihydrogen phosphate component, TB seems to be a promising material for IPT within the limitations of this in vitro study.

• 한국산림과학회지
• /
• 제53권1호
• /
• pp.44-55
• /
• 1981

중성(中性)아황산소오다 전처리(前處理)한 젓나무로부터 가압(加壓)리화이닝법(法)에 의해 고수율(高收率)펄프를 제조(製造)함에 있어서 리화이닝온도(温度)가 섬유(纖維)의 표면구조(表面構造) 및 펄프시트의 강도(強度)에 미치는 영향(影響)을 검토(檢討)하여 다음과 같은 결과(結果)를 얻었다. 전처리수율(前處理收率)(84%, 92% 및 100%) 및 리화이닝온도(温度)($20^{\circ}C$, $120^{\circ}C$ 및 $180^{\circ}C$)는 펄프의 수율(收率), 고해성(叩解性), 펄프 시트의 강도(強度) 및 섬유(纖維)의 표면구조(表面構造)에 미치는 영향(影響)이 현저(顯著)하였으며, 특히 펄프수율(收率)과 고해성(叩解性)은 리화이닝온도(温度)가 상승(上昇)함에 따라 감소(減少)하였다. 전처리수율(前處理收率) 84%의 미고해(未叩解)펄프의 섬유표면(纖維表面)이 거의 2차벽(次壁)으로 싸여있음이 확인(確認)되었으며, 반면(反面) 전처리수율(前處理收率) 92%의 펄프는 복합세포중간층(複合細胞中間層)으로 대부분(大部分) 덮여있었다. 미처리(未處理) 펄프의 경우는 섬유(纖維)의 손상(損傷)이 심하였으며 섬유표면(纖維表面)은 2차벽(次壁)과 복합세포중간층(複合細胞中間層)이 거의 같은 정도로 노출(露出)되어 있었다. 전처리수율(前處理收率)이 높은 펄프(92% 및 100%)의 경우는 리화이닝온도(温度) 및 여수도(濾水度)가 달라지더라도 밀도(密度)와 펄프시트의 강도(強度)와의 사이에는 직선적(直線的)인 비례관계(比例關係)가 성립(成立)하였으며 고온(高温)리화이닝한 것이 실온(室温)리화이닝한 펄프보다 강도(強度)가 우수(優秀)하였다. 수율(收率)이 84%정도로 강(強)하게 전처리(前處理)한 경우 동일(同一)한 밀도(密度)에서 비교(比較)하였을때 시트강도(強度)는 실온(室温)리화이닝한 펄프가 고온(高温)리화이닝한 것보다 우수(優秀)하였다. 이는 전자(前者)가 후자(後者)보다 보수도(保水度)가 높은 미세섬유(微細纖維)를 더많이 함유(含有)한 때문으로 결론(結論)지울수 있다. 또한 섬유장분포(纖維長分布)에 있어서는 리화이닝온도(温度)에 따른 근소한 차(差)가 인정(認定)되었으나 섬유(纖維)의 표면구조(表面構造)는 거의 유사(類似)하였다.

• Archives of Plastic Surgery
• /
• 제40권1호
• /
• pp.52-56
• /
• 2013

Background Measuring grip and pinch strength is an important part of hand injury evaluation. Currently, there are no standardized values of normal grip and pinch strength among the Korean population, and lack of such data prevents objective evaluation of post-surgical recovery in strength. This study was designed to establish the normal values of grip and pinch strength among the healthy Korean population and to identify any dependent variables affecting grip and pinch strength. Methods A cross-sectional study was carried out. The inclusion criterion was being a healthy Korean person without a previous history of hand trauma. The grip strength was measured using a Jamar dynamometer. Pulp and key pinch strength were measured with a hydraulic pinch gauge. Intra-individual and inter-individual variations in these variables were analyzed in a standardized statistical manner. Results There were a total of 336 healthy participants between 13 and 77 years of age. As would be expected in any given population, the mean grip and pinch strength was greater in the right hand than the left. Male participants (137) showed mean strengths greater than female participants (199) when adjusted for age. Among the male participants, anthropometric variables correlated positively with grip strength, but no such correlations were identifiable in female participants in a statistically significant way. Conclusions Objective measurements of hand strength are an important component of hand injury evaluation, and population-specific normative data are essential for clinical and research purposes. This study reports updated normative hand strengths of the South Korean population in the 21st century.