• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.1
• /
• pp.75-81
• /
• 2016

This study was conducted to investigate the effects of deep eutectic solvent (DES) treatment on BCTMP fibers and handsheets properties. DES was prepared using lactic acid and betaine (LB), and the molar ratio of these two components mixtures was controlled to 2:1 (LB 2:1) and 5:1 (LB 5:1). As results, 2% of BCTMP pulp (o.d. weight) was extracted when it was treated by LB 5:1 at $50^{\circ}C$ for 12 hours, stirring constantly at 120 rpm. In contrast, lignin was not extracted when BCTMP was mildly treated by the LB DES mixed with 50% of distilled water at the reacting condition of temperature $60^{\circ}C$ for 2 hours using water bath. These results indicate that conditioned water content and adequate reaction time are needed to achieve effective extraction of lignin. It was also found that stiffening of cellulose fiber due to the mild treatment of LB DES to BCTMP fiber leads to the increase of paper bulk without the loss of strength.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.2
• /
• pp.56-64
• /
• 1991

The destructed chips(Pinus rigida Mill) were sulfonated under different conditions and defiberated. The yields and strengths of pulp, fatty acid and resin acid in sulfonated chips were determined. The results of this work were as follows: 1) A sulfonation caused a yield reduction to 97.9~88.2% at single stage. and to 94.9~88.2% at two stage pretreatment. The pulp yields were rapidly draped with increasing cooking temperature from $130^{\circ}C$ to $150^{\circ}C$ 2) Pulp strengths were improved with iacreasing cooking temperature. A sulfonation with 5% $Na_2SO_3$/NaOH(8/2) at single stage and 2% NaOH-5% $Na_2SO_3$ at two stage were most effective and gave the best combination of strength properteis. 3) Fatty acid esters in chips were mostly consisted of palmitic and olleic acid. During a sulfonation the former increased extensively, and the latter was lost with increase of cooking times. The amount of pimaric type in the chips was relatively decreased by the pretreatnent and abietic-type increased. But the changes between two resin acid types were insignificant. 4) The effciency of pitch removal was dependant upon cooking liquor pH. To remove sufficiently the resinous substance, the chips must be sulfonated at over pH 12. Therefore, taking account of pitch removel, two stage sulfonation is considered suitable as reinforcement pulp for newsprint manufacture from pitch pine chips : 2% NaOH($60^{\circ}C$ 1 hr) at first stage and 5% $Na_2SO_3$ ($130^{\circ}C$, 1hr) at secund stage.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2009.04a
• /
• pp.23-28
• /
• 2009

The purpose of this study was to improve not only wet-end performances but also paper characteristics by the modification of various factors like molecular design and ionic characteristics of polyacrylamides First of all physical characteristics were observed after modify molecular design of the cationic polyacrylamides to linear, branched and cross-linked. In addition it was found analysis method to confirm branch degree of cationic polyacrylamides to combine ionic titration characteristics and spectroscopic behavior, After application of these structure modified polyacrylamides to the multiple retention systems with inorganic microparticles, it was found adjusting of branch degree of polyacrylamides was very important to optimize wet-end improvement. Second, After polymerization of amphoteric polyacrylamide to have both of cationic and anionic functional group in the polymer, we observed not only physical characteristics but also wet-end improvement to apply recycled pulp and found that the improvement of solution stability to prevent hydrolysis and increase of ash retention dramatically to compare traditional cationic polyacrylamide retention aid, Finally, After polymerization of anionic polyacrylamide, we observed not only wet-end improvement but also paper characteristics to apply preflocculation of PCC and it was found the improvements of flocculation efficiency, retention, ash retention, optical properties of the paper and bursting strength to compare traditional preflocculant of cationic polyacrylamide.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.1
• /
• pp.54-63
• /
• 2010

Recently, as the function of largest supplier of biomass for "low carbon green growth", the necessity for systematic management of afforestation areas is emphasizing. The forestation of seedling, besides the afforestation cost itself, is required some additional follow-up management costs, like mowing and fertilizing of forestation area, and removal of bindweed. The mulching mat for afforestation seedlings is available for rooting of little seedlings as well as initial forestation expenses. Mulching technique is also used to control soil temperature and moisture by covering the surface of ground. In this study, the paper based-mulching film coated with biodegradable polymer and functional additive was specially produced using laboratory bar coater, and analyzed for its degradable behavior. Coating colors were prepared by dissolving PE (polyester) 80 % and PLA(polylactic acid) 20 % in chloroform and finally applied to handsheet prepared by preceding study conditions. Base paper and polymer-coated paper were artificially aged by 2 kinds of degradation methods, which are soil degradation by microorganism and light degradation by 257 nm UV wavelengths. Strength property, oxidation index and morphological property were evaluated by reduction rates of tensile strength, FTIR spectra ratio of carboxyl and carbonyl group and SEM micrograph. As these results, polymer coated-paper was superior to base paper in degradation behaviors, having results with lower reduction rate of strength properties.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.1
• /
• pp.41-47
• /
• 2010

Increasing ash content of the paper is one of the most effective methods for saving raw materials and steam consumption and improving optical properties and better print quality. However, the increase of filler loading or filler content using a conventional wet end system is limited due to severe loss in strength properties, affecting runnability and product quality. This is because the filler has no ability to make bonding with cellulosic fibers. Therefore, if the technology to give filler the bonding ability is developed, the ash content of the paper can be increased more than ever. This study was carried out to modify PCC by coating its surface with starch contributing to better bonding with fibers. To prepare the modified PCC, cationic starch was selected as a polymer and then pretreatment was done by mixing PCC and cationic starch. Consequently, the pretreated PCC contributed to higher tensile strength, stiffness and opacity than the conventional filler, such as GCC and untreated PCC. However, CIE whiteness and ISO brightness decreased slightly compared to conventional fillers.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.21-31
• /
• 2012

In this study, we modified the surface of ground calcium carbonate (GCC) with polyelectrolytes with different molecular weight using Layer-by-Layer (LbL) multilayering technique and investigated its effect on the paper properties. Polydiallydimethylammonium chloride (poly-DADMAC) and poly sodium 4-styrene sulfonate (PSS) which have different molecular weights were used for LbL multilayering. Zeta potential and particle size of the LbL modified GCC were measured. After preparation of handsheets, their structural and mechanical properties were evaluated. The zeta potential and average particle size of the modified GCC were affected by the molecular weight of anionic polyelectrolyte (PSS). The zeta potential was higher and the particle size was smaller when GCC was treated by PSS with high molecular weight compared to the case with low molecular weight of PSS. The tensile and internal bond strength of the handsheets was increased with an increase in the number of layers on GCC particles, but the molecular weight of polyelectrolyte did not significantly affect the paper strength.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.2
• /
• pp.35-41
• /
• 2012

In this study, wheat starch adhesive was investigated the shape and structure of starch, the difference in characteristics such as chemical composition according to the fermenting period of 2 years or less. The fermenting period of wheat starch adhesive is 1 month, 2months, 4 months,6 months, 1 year, 2years old. The wheat starch adhesives were investigated total sugar contents, protein contents, properties of gelatinization, pH, the bonding strength and also observed the surface of starch,. As a result, the longer the fermenting period, the increasing in total sugar contents and decreasing in protein contents. The particle shape and surface were similar regardless of the period. In addition, properties of gelatinization according to the fermenting period also could not see the difference. In pH of the adhesive, the longer the fermenting period, the near to neutral. The adhesive was high bonding strength in 4 months, but appeared a tendency to decrease from 6 months. The damage assessment through the UV degradation in regard to the papers applied the adhesive was accomplished. Color difference was no change except 1 month. The 4 months and 6 months' pH was each 5.0, 5.2. But it was near to neutral that the 12 months and 24 months' pH was each 5.7, 5.9.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.85-90
• /
• 2006

Increasing the filler content of sheet improves the optical properties and printability of paper and provides an opportunity for saving production cost through fiber replacement with relatively low-priced filler. But increasing the filler content tends to decrease the strength of paper and filler retention. It also tends to deteriorate drainage on the paper machine. To overcome these problems, preflocculation technology of fillers may be employed. Many research efforts have been made on the properties of preflocculated filler, namely prefloc, whose size and size distribution were influenced by polymer type and shear level. But there is much to be investigated about the effect of the prefloc characteristics on the physical properties of paper. To evaluate the effect cationic polymers on the size and size distribution of preflocculated GCC and their shear stability, cationic PAM and cationic starch were used. The influence of the preflocculation on filler retention and its surface distribution, and the changes of physical and optical properties of handsheets affected by the characteristics of preflocs were examined. Filler distribution on sheet surface was also analyzed by EPMA. Results showed that cationic PAM formed large preflocs at low dosage. Cationic starch was required to add 15 times as much as cationic PAM to obtain the preflocs with similar size. But preflocs formed with cationic starch was superior in shear stability to those formed with cationic PAM. Filler preflocculation technology could provide an opportunity of increasing filler content significantly without loss in tensile strength. And increased filler contents could compensate brightness loss which often accompanies filler preflocculation. When excessively large preflocs were used, however, brightness loss rather than the improvement in tensile strength was predominant. Therefore it is of great importance to produce preflocs with proper size and shear stability for maximizing the improvement of physical properties of papers.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.99-103
• /
• 2006

Use of recycled fibers in papermaking has been increased for economical and environmental reasons. Recycled panels are major liber resources for brown grades and newsprints. Since the recycled fibers have disadvantageous properties as raw materials for papermaking it is of great importance to optimize the use of these recycled fibers. OCC (Old Corrugated Containers) is the major fiber source for linerboards and corrugating mediums that require diverse specification in strength properties. Many studies have been focused to overcome the problems of strength reduction of brown grades when recycled fibers are used as raw materials. The problem of strength loss for papers made from recycled fibers is closely associated with the increased amount of fines in recycled fibers and hornification of fibers. Fines contained in the recycled fiber resources cause problems not only in paper properties but also in process runnability. This shows that the optimal management and proper use of fines in recycling papermaking system are critical to get most benefits of using recycled fibers. In this study some approaches for optimal use of fiber fines in recycled paper mill have been investigated. Stock samples, prepared in the laboratory and obtained from a recycling plant were used. Fractionation of these samples was made using Sweco screen. And the effect of the addition of polyelectrolytes including cationic PAM and PEI on drainage and retention was evaluated. Different methods of polymer addition were compared to find the most effective ways of treating recycled fiber stocks with polyelectrolytes. Addition of polyelectrolytes to the short fiber fraction was most effective in retention and drainage. The influence of the charge and molecular weight of these two polymers has been examined and discussed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.1
• /
• pp.10-18
• /
• 2000

To improve the physical properties of OCC (Old Corrugated Container) fibers, we used the mechanical pre-treatment on the fibers before refining . The mechanical action in the Hobart mixer induced high shear and compression on the fibers, which resulted in changes of fiber internal structure, and microcompressions on the surface of the fibers. We evaluated the amount of mechanical treatment on the fibers by fiber curl index for convenience. Four different refining techniques were applied to the pre-treated fibers (valley beater, Kady mill, PFI mill, and Impact refining) to find the best combination of the pre-treatment and the refining methods. Conclusions were summarized as followed. 1. Mechanical pre-treatment in Hobart mixer for more than 1 hour caused the increase of curl index of OCC fibers, and increased breaking length, burst index, and tear index the handsheets more than 10 % in this experiment. 2. Kady mill and PFI mill refining were effective in keeping fiber length from shortening Kady mill and Valley beater refining straightened out the fiber curls, and reduced the curl index. 3. Valley beating reduced fiber length very fast and generated fines more than other refining methods. 4. To increase breaking length and burst strength while keeping tear strength , combination of mechanical pre-treatment and Valley beating were most effective.